Samsung FTQ352IWUW Service Manual download pdf (Page 10)

3. Disassembly and Reassembly

3-1RemovingCover-BackMainWire,Cover-BackGuardWireandPCB-

Main

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so

can result in death or electrical shock.

PRECAUTION

When you work on the electric range, be careful when handling the sheet metal parts. Sharp

edges may be present, and you can cut yourself if you are not careful.

Parts Explaination Photo Explaination

Cover-Back Main

Wire, Cover-

Back Guard Wire

and PCB-Main

1. Turn off the electrical supply

going to the range.

Pull the range away from the

wall so that you can access the

rear panel.

Remove the 6 screws from the

Cover-Back Main Wire and

remove the panel.

4. Remove 3 screws from the

Cover-Back Guard Wire and

remove the cover.

Remove 4 screws of PCB Main

and separate PCB Main.

REASSEMBLY NOTE:

When you remove(replace) mem-

brane tail from the connector, pull

the actuator fully

Cover-Back

Guard Wire

Cover-Back

Main Wire

PCB Main

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 68 69

No comments

Samsung FTQ352IWUW Service Manual Page 10