Samsung HW-D450-ZA User Manual download pdf (Page 12)



The Subwoofer's linking ID is preset at the factory and the main unit and sub should link (connect wirelessly)

automatically when main unit is turned on. If the link indicator does not light when main unit and subwoofer are

turned on, please set the ID by following the process below.

Before moving or installing the product, be sure to turn off the power and disconnect the power

cord.

If the main unit is powered off, the wireless subwoofer will be in the standby mode and the

STANDBY LED on the upper side will come on after 30 seconds Link indicator (Blue LED)

blinking.

If you use a device that uses the same frequency (5.2GHz or 5.8GHz) near the system, some

sound interruption may be heard due to interference.

The transmission distance of the wireless signal between the main unit and sub is about 33 ft.,

but may vary depending on your operating environment. If a steel-concrete or metallic wall is

between the main unit and the wireless subwoofer, the system may not operate at all, because

the wireless signal cannot penetrate metal.

If the main unit doesn't make wireless connection, follow steps 1-4 above to retry the

connection between the main unit and wireless subwoofer.

The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from

water and moisture.

For optimal listening performance, make sure that the area around the wireless subwoofer

location is clear of any obstructions.

▪

 Plug the power cords of the main unit and subwoofer into an AC power supply.

 Press the button on the back of the subwoofer with a small, pointed object for 5 seconds.

The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.

•

POWER

TV POWER

AUDIO

MUTE

TV INFO

AUTO

POWER

AV SYNC

AH59-02330A

VOL

SOUND

MODE

SOUND

S.VOL

INPUT

SELECT

DIMMER

S/W LEVEL

HDMISPK CONTROL

DRC

POWER

TV POWER

AUDIO

MUTE

TV INFO

AUTO

POWER

AV SYNC

AH59-02330A

VOL

SOUND

MODE

SOUND

S.VOL

INPUT

SELECT

DIMMER

S/W LEVEL

HDMISPK CONTROL

DRC

 While the main unit is powered off (

STANDBY

mode), press

 on the remote control for 5 seconds.

 The Power Indicator on the main unit lights off and on, then

returns to  mode.

The main unit and the subwoofer are now linked (connected).

The Link indicator (blue LED) on the subwoofer is turned on.

You can enjoy better sound from the wireless subwoofer by

selecting the sound mode. ( See page 17 )

•

STANDBY

LINK

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments

Samsung HW-D450-ZA User Manual Page 12

Comments to this Manuals

Related products and manuals for Audio Samsung HW-D450-ZA