PORTABLE DIGITAL WIRELESS MONITORING SYSTEM USER MANUAL MODEL: SEW-3030
9Wireless Receiver Installation After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. 1. Place the re
105. Microphone – Receives sounds for the area near the camera, and transmits sound from the camera to the receiver. 6. Pair Button – The pair button
11Side Controls 9. Sound Alarm Trigger – Adjust the sensitivity knob to set the sound alarm sensitivity. The receiver will beep to alert you when the
12Night Vision This camera has built-in IR LED’s, which provides the camera with the ability to view images in no/low light conditions. It is import
13Connecting Camera Power The camera can be powered either by using the provided power adaptor or using batteries (requires 3 AA type batteries, not
14BATTERY WARNING When using the product in portable mode, check batteries regularly. DO NOT use the monitor in portable mode when batteries are lo
15Adjusting the Receiver Volume The receiver volume can be adjusted by using the [+/–] keys when viewing a camera. Press the [–] key to decrease the
16Brightness The Brightness menu is used to adjust the brightness of the image. Use the [+] and [–] keys to change the bar from DARKEST to BRIGHTEST.
17If POWER SAVING mode is deactivated by pushing [A], [M] and SLEEP, the monitor will go back to black screen after the time you set if there is no s
18Auto mute This function automatically cuts off the audio when there is only slight environmental noise on the camera side. Choose Yes to enable th
Copyright©2010 Samsung Techwin Co., Ltd. All rights reserved.d.Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product
19Date Setting You can set the date value with year, month, date to show in the monitor screen. Use the [+] and [–] keys to select the Date Setting,
20Temp. Unit You can select the temperature unit ℃ or ℉ for you option to show in the screen Use the [+] and [–] keys to select the Temp. Unit, Pres
21Factory Reset Choose Yes to reset the receiver to factory defaults – all menu settings will be reset. NOTE: Camera pairing settings will NOT be aff
221. Power on the camera by connecting the power adaptor or battery pack, and turning the switch to ON. The power LED for the camera should be ON. 2.
23Hardware and CD driver installation 1. Put CD into CD ROM on computer and click the icon of Install USB Driver to run installation program.
24 3. Select “I accept the terms of the license agreement” and then press “Next>” button. 4. Click the “Browse” button, select the destinatio
25 5. Press the “Finish” button to complete the driver program. 6. Power on the camera and receiver. Use the included USB cable to connect the re
26 7. After connecting the USB cable to the computer, you will see “Found New Hardware Wizard”. Select “No, not at this time” and press the “Next” b
27 9. Select “Continue Anyway” 10. Copy the driver and wait to finish. 11. After installation is finished, you can find “Wireless Monitoring Syst
28Troubleshooting If you have problems with the system, there is often a quick and simple solution. Please try the following: Problem Solution No
2Caution if you use the system to watch a young child, do not place the camera where the child can reach. When using the system with only battery po
29 Appendix #1 - Receiver Specifications Receiver Receiving Frequency Range 2.400GHz~2.4835GHz Data Rate 2.0 Mbps Receiving Sensitivity -81dBm De
30 Appendix #2 - Camera Specifications Camera(s) Transmit Frequency Range 2.400GHz~2.4835GHz Data Rate 2.0 Mbps Transmitting Power 14dBm (TYP) Mo
CAMERA FRONT67mm [2.638inch]Screw holes forthe Camera installationTEMPLATEThis template is used to install the camera on the wall31
3• This product is intended for indoor use only. • This product is not intended for use as a medical monitor and its use should not replace adult s
4Features • Samsung’s digital wireless technology provides excellent image quality and clarity. • Virtually eliminates interference using a secure an
ContentsFeatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Getting Started . . . . . . . . . . . .
6Getting Started The system comes with the following components: Wireless Camera Wireless Receiver Power Adapter Power Adapter
7• Press the [M] key to manually switch between cameras. Menu Mode: Use the [+/–/A/M] keys to navigate in Menu Mode. Press the OK button to confirm t
812. / Button – Press the button to start or stop the built-in tunes 13. Button – Press the button to play next tune. 14. TALK Button – Press do
Comments to this Manuals