Samsung SHR-2041 User Manual

Real Time DVRSHR-2040/2041/2042 User’s ManualEnglishSHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page i

EnglishNo. Name FunctionSHR-2040/2041/2042 USER’S MANUAL3Part Names and Functions1-3Power LEDHDD AccessLEDDisplays Normal Access to HDD. Upon Access t

SHR-2040/2041/2042 USER’S MANUAL5Preset View6-7● Preset setup allows your movement to a certain saved position of PTZ Camera.● Press the VIEW button i

● After you select a function, press Enter. Then the function will be checked and start running.● If you select other function during the operation, t

SHR-2040/2041/2042-ENG-1013 10/19/07 10:25 AM Page 6-9

Chapter 7 RecordingSHR-2040/2041/2042-ENG-1013 10/19/07 10:25 AM Page 7

1REC (Normal Recording)7-1● Pressing REC the button starts recording as set in the record mode. Then, REC LEDlights on and a recording icon appears on

2Schedule Recording7-2● While “Record Schedule” or “Schedule/Event recording” is selected in the Record Schedulemenu, Schedule Recording automatically

EnglishSHR-2040/2041/2042 USER’S MANUAL3Event Recording7-3● Alarm DetectionSensor operation mode in Alarm of Event Record menu shall be set to N.O (No

Chapter 8 Search and PlaySHR-2040/2041/2042-ENG-1013 10/19/07 10:25 AM Page 7-4

EnglishBefore Use8-1● Pressing the “SEARCH” button shows Search Menu on the screen as seen above.● Calendar Search searches a video file by the use of

English1Calendar Search8-2● Be sure to select both the channel and the date to search. And press the [OK] button tosearch for the desired time.● Use a

English1-4No. Name FunctionRECORDMENU (PRESET)ButtonZOOM(TELE)ButtonPTZ ButtonSEARCH(VIEW)ButtonFREEZE(WIDE)ButtonDirection ButtonKeySearch FunctionKe

EnglishSHR-2040/2041/2042 USER’S MANUAL8-3● Searches Normal Recording, Schedule Recording, Alarm Recording, Motion Recording, andV.Loss(Video Loss) Re

English3Date/Time Search8-4● Use the Date/Time information to search a video file at the time as you desire. Up to 4 channels can be searched at once.

EnglishSHR-2040/2041/2042 USER’S MANUAL8-5● Searches the oldest one among recorded video files. Up to 4 channels can be searched atonce.● After you se

English5Go to Last Search8-6 ● Searches the latest one among recorded video files. Up to 4 channels can be searched atonce.● After you select a cha

English6BackupSHR-2040/2041/2042 USER’S MANUAL8-7● First, select the backup device. ● Mark the data of device. ● Select the file name to backup, and t

English7Playback 8-8NoteNotePressing the PLAY button( ) does not affect the playback as far as the user stays in theMENU. Be sure to exit fr

EnglishSHR-2040/2041/2042 USER’S MANUAL8-9● Definition Play Screen Mode① 4 Split Screen : If you select more than a channel, 4 Split Screen will appea

English8-10● Play at Faster SpeedIf you press the LEFT or RIGHT button( / ) during the playback, you will beable to see the screen

SHR-2040/2041/2042-ENG-2 10/19/07 10:37 AM Page 1

Chapter 9 Smart ViewerSHR-2040/2041/2042-ENG-2 10/19/07 10:37 AM Page 9

EnglishSHR-2040/2041/2042 USER’S MANUAL1-5[SHR-2041][SHR-2042]No. Name FunctionChannel ButtonSelects a channel in the Single Mode. Used for numberinpu

English1Introduction9-1SHR-2040/2041/2042 USER’S MANUALSmart Viewer is a program that a general PC user is able to install SHR-2040/2041/2042 to his P

English2Feature9-2● Thanks to the transmission of video data compressed by the MPEG-4 VideoCompression method, it can play the video images of good qu

SHR-2040/2041/2042 USER’S MANUAL3PC Specification(Recommendation)9-3● OS : Win2000, WinXP● Recommendation : CPU Pentium 3, 1GHz or higherRAM 256 MB o

● Run the “Setup.exe” file.4Smart Viewer Installation9-4Smart Viewer Installation● Put a Smart Viewer Program CD in CD-ROM and open the “Smart Viewer”

EnglishSHR-2040/2041/2042 USER’S MANUAL9-5● Click the “Next” button.● If you agree with Smart Viewer License, click “Yes”.● Designate a folder to inst

English9-6● The system proceeds with setup file installation and system setup.● Installation is complete. Click the “Finish” to terminate the installa

EnglishSHR-2040/2041/2042 USER’S MANUAL5Smart Viewer Program Execution9-7● Double-click the Smart Viewer icon in the background screen to run the prog

6Smart Viewer Initial Screen9-8● Screen DescriptionEnglish! This is the button to enter the Search mode in which you can search and playremote the vid

SHR-2040/2041/2042 USER’S MANUAL7Monitoring Mode9-9● DVR(SHR-2040/2041/2042) / SITE Connection- Select the name of DVR(SHR-2040/2041/2042) or site for

English9-10● Monitoring Mode Connection Screen● Mode Conversion Button- This button converts the monitoring mode and the search mode.NoteNoteNo more t

English1-6Mode SelectionButtonSearchMODEDisplays 4 split screen.Displays the selected channel to the Single ModeDisplays both LIVE Channel and Playbac

EnglishSHR-2040/2041/2042 USER’S MANUAL9-11● Time Information- As soon as you are connected to SHR-2040/2041/2042, the current date, day, andtime of S

English9-12NoteNote# Clicking the speaker icon turns the audio of channel on or off.: Audio OFF : Audio ONIf you turn the audio of a SHR-2040/2

EnglishSHR-2040/2041/2042 USER’S MANUAL9-13● Event Log Display Window- Click the Log button to activate the log display window.- It displays the event

English9-14CautionCautionWhen Time Change, Load Factory Default, Network Change, System Shutdown, orHdd Format event occurs, Smart Viewer terminates t

EnglishSHR-2040/2041/2042 USER’S MANUAL9-15● Monitoring screen condition Information / Selection Button- Displays the Split or Monitoring condition of

English9-16: When monitoring with Quad Mode: When monitoring with Single Mode: Camera OffNoteNoteThe number in the screen icon indicates the screen po

EnglishSHR-2040/2041/2042 USER’S MANUAL9-17● NEXT Button- Click the NEXT(Mouse Left Button) to see the channel next to the current channel.- In Single

English9-18● FAVORITE Button- If you press FAVORITE, the FAVORITE window will be activated.If you click the current FAVORITE, the cameras saved inthe

EnglishNoteNoteThe adjusted Audio volume, brightness, and contrast values will be saved in your PCand remain unchanged even if you terminate Smart Vie

English● PTZ Camera Control Buttons- Select a channel connected to PTZ Camera to control PTZ related functions.- PAN Left / Right- TILT Up / Down- Dia

EnglishSHR-2040/2041/2042 USER’S MANUAL1-7CautionCautionDo not play DVR on the carpet or other soft material to prevent clogging of the air ventilator

EnglishIf you click the current PRESET number andname, the camera will move to its position.You can delete the selected or all the PRESET setup values

English9-22NoteNoteThe Camera Menu Setup function is supported by Samsung and Panasonic cameraonly.● Self Menu Setup of PTZ device! This is a Menu scr

EnglishSHR-2040/2041/2042 USER’S MANUAL8Search Mode9-23● The initial screen of search mode - The search mode is divided into the remote mode to search

English9-24● DVR(SHR-2040/2041/2042) Selection/Change by contacting SITE- Same as “DVR(SHR-2040/2041/2042)/SITE Connection” of the monitoring mode.● R

EnglishSHR-2040/2041/2042 USER’S MANUAL9-25● Calendar Window- If the video data in on-line SHR-2040/2041/2042 is recorded, the date turns red.- If you

English9-26Backup Button- If not playback(Stop), the video save button performs the backup function.- If the save button is pressed, the window for ba

EnglishSHR-2040/2041/2042 USER’S MANUAL9-27# Print- This function outputs the screen zone of the playback video which is nowbeing displayed.$ Setup Mo

English9-28NoteNoteDuring the play(Play/RevPlay/FF/FB), disconnection or change to the both monitoring mode and local mode is not permitted. Click th

EnglishSHR-2040/2041/2042 USER’S MANUAL9-29● Next Button- Changes the channel as the Next button does in the monitoring mode.● Reload Button- Updates

9Setup Mode9-30● Initial ScreenEnglish! Button to select items for DVR Setup, Viewer Setup, Site Setup, and S/W Versionsetup.@ It shows what the selec

English1-8No. Name FunctionComposite Video Signal Input Port (BNC Style Connector)You may use THROUGH port to transmit a video signal to theother vide

English● Setup Item Selection Button- It is used for the selection of each setup item.- It is composed of 4 items-DVR Setup, Viewer Setup, Site Setup,

English9-32DVR Setup- Click the [DVR Setup] button for DVR Setup.- You can change remotely the setup items of SHR-2040/2041/2042 Menu, beingconnected

EnglishSHR-2040/2041/2042 USER’S MANUAL9-33● Detailed DVR Setup Items! System- InformationInformation shows the information on on-line SHR-2040/2041/2

English9-34NoteNote- The Delete key and the combination of Ctrl+C or Ctrl+V in the keyboard are notsupported at the System Password input.- Use the BA

EnglishSHR-2040/2041/2042 USER’S MANUAL9-35NoteNoteThe change of language by the system language results in the change of languageexpression setup of

English9-36NoteNoteIf you install the remote control device to the main body of SHR-2040/2041/2042and activate the setup, PTZ control is not available

EnglishSHR-2040/2041/2042 USER’S MANUAL9-37@ Camera- Config.Config. sets Video, Audio On/Off, Camera Title, and Auto Sequence Timefor each channel of

English9-38- PTZ deviceIt sets Camera ID, Protocol, Baud Rate, Parity, Data Bit, Stop Bit, and SerialMode when connecting the dome camera to all the c

EnglishSHR-2040/2041/2042 USER’S MANUAL9-39- Video size Rec.Sets the Video size. The Video size being set in the menu affects to the ipssetup of Rec.

English9-40- Event Rec.It sets the Video Size, Quality, Rate, Pre Alarm, and Post Alarm values to berecorded when an event occurs.NoteNoteFull D1(L) V

SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 2

EnglishSHR-2040/2041/2042 USER’S MANUAL9-41- Alarm Rec.It sets the information necessary for the alarm recording.- Motion Rec.It sets the information

English9-42- Video LossVideo Loss sets up the information on how to inform the user of Video Loss of SHR-2040/2041/2042.% ScheduleYou can configure sc

SHR-2040/2041/2042 USER’S MANUAL9-43English- Alarm Out ScheduleYou can change the alarming schedulerelated settings.SHR-2040/2041/2042-ENG-2 10/19/07

9-44● Double-click the Smart Viewer icon in the background screen to run the program.English^ Network- PasswordIt sets the password for Admin and User

EnglishSHR-2040/2041/2042 USER’S MANUAL9-45CautionCaution- Be sure to inquire the network manager before you input Network IP, Gateway,Subnet Mask, an

English9-46● Callback- You can set the Callback function of SHR-2040/2041/2042.- In the event of Alarm, Motion Detection, or Video Loss, set the IP ad

EnglishSHR-2040/2041/2042 USER’S MANUAL9-47NoteNote- SHR-2040/2041/2042 uses 4 ports for TCP connection.- The PORT number is flexible and 4 consecutiv

English9-48● Video Recording! Naming- Being connected to SHR-2040/2041/2042 in the monitoring or search mode, youcan save the video displayed with .d

EnglishSHR-2040/2041/2042 USER’S MANUAL9-49● Sequence Time- When connecting with SHR-2040/2041/2042 in the monitoring mode, set theauto sequence time

English9-50Site Setup- Click the [Site Setup] button for Site Setup.- The information of DVR(SHR-2040/2041/2042) or Site that you want to connect bySm

Chapter 2 InstallationSHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 3

EnglishSHR-2040/2041/2042 USER’S MANUAL9-51● DVR List- The information of DVR(SHR-2040/2041/2042) that you want to connect bySmart Viewer is set in th

English9-52- If your DVR (SHR-2040/2041/2042) uses a static IP, select “Static IP” forAddress Type and type in the name of the DVR (SHR-2040/2041/2042

EnglishSHR-2040/2041/2042 USER’S MANUAL9-53- If you select “Use DDNS” in the network settings menu of DVR (SHR-2040/2041/2042) or use an IP splitter t

English9-54NoteNote- The MAC address of DVR is written at the side label of the product.It is also found in the system information of DVR Menu.- If th

EnglishSHR-2040/2041/2042 USER’S MANUAL9-55# To Edit the old DVR(SHR-2040/2041/2042)- If you select a DVR(SHR-2040/2041/2042) in the DVR list to edit

English9-56● Site List- You can register and control the many DVRS(SHR-2040/2041/2042) to be connected with the smart viewer at once with a site in th

EnglishSHR-2040/2041/2042 USER’S MANUAL9-57@ To delete an old site or DVR(SHR-2040/2041/2042)- If you select a site or DVR(SHR-2040/2041/2042) in the

English9-58- If you select a DVR(SHR-2040/2041/2042) and press the [Edit] button, thefollowing message box pops up and the DVR(SHR-2040/2041/2042) can

EnglishSHR-2040/2041/2042 USER’S MANUAL9-59S/W Version- If you press the [S/W Version] button, the smart viewer version, system requirements, and the

English9-60● Smart Viewer Version- Smart Viewer Version and system requirements are displayed.● DVR Version- DVR Version not only displays the connect

1Installation Environment Setup 2-1Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator.To play DVR on the c

EnglishSHR-2040/2041/2042 USER’S MANUAL9-61@ Click the following button to open the “SHR-2040/2041/2042 Firmware” file in format.# Press the [Upgrade]

9-62EnglishNoteNoteImport/Export function does not affect for the Motion Detection Setup Area andRecord Schedule.● Extracting the settings for DVR(SHR

SHR-2040/2041/2042-ENG-2 10/19/07 10:37 AM Page 9-63

AppendixSHR-2040/2041/2042-ENG-2 10/19/07 10:37 AM Page 9-64

English1Product Specification10-1SHR-2040/2041/2042 USER’S MANUALItem Details RemarksOS Embedded OSBroadcasting NTSC/PAL SystemInput Voltage 2040-DC 1

English10-2Item Details RemarksCompression Video : MPEG4Method Audio : ADPCMResolution Quality Level Max Image Rate Very HighCIF(C) High35

EnglishSHR-2040/2041/2042 USER’S MANUAL10-3Item DetailsRemarksCalendarEvent- Normal, Schedule, Alarm, Motion, Video LossSearch ModeDate/TimeGo to Firs

10-4English2Outline Drawings [SHR-2040][SHR-2041]SHR-2040/2041/2042-ENG-2 10/19/07 10:37 AM Page 10-4

SHR-2040/2041/2042 USER’S MANUAL10-5English[SHR-2042]SHR-2040/2041/2042-ENG-2 10/19/07 10:37 AM Page 10-5

10-6English3Factory DefaultThis restores the Network information and preset values in SHR-2040/2041/2042 tothe original state at the time of factory s

2-2English<Instructions for the rack mounting of Samsung DVR>1. The rack on which the DVR is mounted should not be sealed off.2. And it also can

SHR-2040/2041/2042 USER’S MANUAL10-7EnglishClassification Detailed Items Factory SetupDuration OffEvent Monitoring Date OnOSD Display Time OnMonitorin

10-8EnglishClassification Detailed Items Factory SetupConnection Mode Static IPBandwidth 2MbpsAdmin Password 4321User Password 4321IP 192.168.001.200

SHR-2040/2041/2042 USER’S MANUAL10-9English4SHR-2040/2041/2042 Smart Viewer Frame Specification for the PlaybackFRAME Viewer Screen VIDEO SIZERATE Spl

10-10EnglishNoteNoteThe play frame specification of Smart Viewer varies on the setup of SHR-2040/2041/2042 Recording Rate and Video Size or the screen

SHR-2040/2041/2042 USER’S MANUAL10-11English5Troubleshooting(FAQ)1. The system power is dead and LED in front of the system does not operate at all.-

10-12English8. The cursor cannot reach Start during Calendar Search.- Please check both the channel and the date for play are left checked. Both shal

SHR-2040/2041/2042 USER’S MANUAL10-13English14. Smart Viewer in operation is disconnected.- If you change time, network setup, HDD format, Default Set

6Open source license report onthe productThis product uses software provided under the name of GPL and LGPL. You can receive the following GPL and LGP

SHR-2040/2041/2042 USER’S MANUAL10-15Englishcontaining the Program or a portion ofit, either verbatim or with modificationsand/or translated into anot

10-16Englishthe terms of Sections 1 and 2 above ona medium customarily used for soft-ware interchange; or, b) Accompany it with a written offer,valid

EnglishSHR-2040/2041/2042 USER’S MANUALiiPlease be sure to keep the following in mind for the right use of the product topre-vent proprietary risk or

SHR-2040/2041/2042 USER’S MANUAL2-3English2Checking Product & AccessoryUpon delivery of a product, you shall unwrap the product and put it on the

SHR-2040/2041/2042 USER’S MANUAL10-17Englishinvalid or unenforceable under any par-ticular circumstance, the balance of thesection is intended to appl

10-18EnglishBEING RENDERED INACCURATE ORLOSSES SUSTAINED BY YOU ORTHIRD PARTIES OR A FAILURE OFTHE PROGRAM TO OPERATE WITHANY OTHER PROGRAMS), EVEN IF

SHR-2040/2041/2042 USER’S MANUAL10-19EnglishLicense, version 2, hence the versionnumber 2.1.]PreambleThe licenses for most software aredesigned to tak

10-20Englishwe use the ordinary General PublicLicense for many libraries. However,the Lesser license provides advantagesin certain special circumstanc

SHR-2040/2041/2042 USER’S MANUAL10-21Englishforming a work based on the Library,and copy and distribute such modifica-tions or work under the terms of

10-22Englisheven though third parties are not com-pelled to copy the source along withthe object code. 5. A program that contains no deriva-tive of an

SHR-2040/2041/2042 USER’S MANUAL10-23English If distribution of the work is made byoffering access to copy from a desig-nated place, offer equivalent

10-24Englishdirectly or indirectly through you, thenthe only way you could satisfy both itand this License would be to refrainentirely from distributi

SHR-2040/2041/2042 USER’S MANUAL10-25EnglishTIAL DAMAGES ARISING OUT OFTHE USE OR INABILITY TO USE THELIBRARY (INCLUDING BUT NOT LIM-ITED TO LOSS OF D

10-26English* "This product includes softwaredeveloped by the OpenSSL Project* for use in the OpenSSL Toolkit.(http://www.openssl.org/)&quo

2-4English3HDD AdditionSHR-2040 HDD ADDITIONThe user can add 1 HDD to this product. However, there are many factors that can cause elec-trical shock,

SHR-2040/2041/2042 USER’S MANUAL10-27English* in documentation (online or textual)provided with the package.** Redistribution and use in source andbin

AB68-00655B-02Correct Disposal of This Product(Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countr

SHR-2040/2041/2042 USER’S MANUAL2-5English3. There is bracket-HDD mounted on the back where you can mount a HDD, and you have toremove the screws (4 s

2-6English5. Mount the HDD to the bracket-HDD with the SCREW-TAPTITE (BW, +, S, M3, L6, ZPC) (4 spots) that was provided as an accessory. (The screws

SHR-2040/2041/2042 USER’S MANUAL2-7English7. Make sure that the bracket-HDD is mounted stably inside the product, then connect thepower supply cable a

2-8EnglishSHR-2041 HDD ADDITIONThe user can add 3 HDDs to this product. However, there are many factors that can cause electrical shock, accidents, an

SHR-2040/2041/2042 USER’S MANUAL2-9English3. There is a bracket (bracket-HDD) mounted on the right and left sides where you can mountthe HDD, and you

2-10English4. Remove the bracket-HDD from the product by separating the power supply cable, signaltransmission cable (IDE cable), and fan cable then p

SHR-2040/2041/2042 USER’S MANUAL2-11English6. Re-mount the built-in HDD bracket-HDD to the place where it was separated from.Place the bracket-HDD so

2-12EnglishSHR-2042 HDD ADDITIONThe user can add up to 2 HDDs to this product. However, there are many factors that can cause electrical shock, accide

EnglishiiiWARNING[Battery]As wrong exchange of the battery in SHR-2040/2041/2042 may cause explosion, you shall usethe certified battery for SHR-2040/

SHR-2040/2041/2042 USER’S MANUAL2-13English3. There is a bracket (bracket-HDD) mounted on the right and left sides where you can mountthe HDD, and you

2-14English4. Remove the bracket-HDD (A) from the product by disconnecting the power supply cable, signal transmission cable (IDE cable), and fan cabl

SHR-2040/2041/2042 USER’S MANUAL2-15English6. Re-mount the built-in HDD bracket-HDD to the place where it was removed from.Place the bracket-HDD(A) so

2-16English8. Check if there is any problem with connector or wiring inside of the product for connectingand mounting then close the cover.9. Tighten

SHR-2040/2041/2042 USER’S MANUAL2-17EnglishWARNING! Regarding the sub fan, you need additional brackets and sub fans as follows.The sub fan is shaped

2-18English# Please install the fan which is seen at the right from the front view of SHR-set as follows.$ The cable should be out from the left hole.

SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 2-19

Chapter 3 Connecting with other deviceSHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 3

English1Connecting the Video, Audio, and Monitor 3-1SHR-2040/2041/2042 USER’S MANUAL[SHR-2040]SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 3-

English3-2[SHR-2041/2042]SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 3-2

EnglishivSafety RegulationsBefore we startStandards ApprovalsChapter 1 Overview1. Introduction2. Features3. Part Names and FunctionsChapter 2 Installa

EnglishSHR-2040/2041/2042 USER’S MANUAL3-32Connecting the Network● Connecting to Internet through Ethernet(10/100BaseT)● Connecting to Internet throug

English3-4● Connecting to Internet through Ethernet(10/100BaseT)● Connecting to Internet through ADSL[SHR-2041/2042][SHR-2041/2042]SHR-2040/2041/2042-

English1. There are two USB connecting ports on the front and back of SHR-2040/2041/2042. 2. USB Hard Disk, USB CD/DVD, and USB Memory are connected t

English3-64Connecting the Alarm Input/OutputThe Alarm IN/OUT port in the back of SHR-2040/2041/2042 is composed of the followingelements.● ALARM IN/OU

EnglishSHR-2040/2041/2042 USER’S MANUAL3-7● ALARM IN/OUT ConnectionSHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 3-7

English3-85Connecting the RS-485 Device● Connect the RS-485 Device through the back port of SHR- SHR-2040/2041/2042.● You can install and control the

SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 4

Chapter 4 LiveSHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 5

English1System Operation4-1SHR-2040/2041/2042 USER’S MANUAL● Turn the power on and the following LOGO pops up on the screen.● After the LOGO appears,

2Live Screen Mode4-2Definition of Live Screen IconThe Live screen icons display the current setup and function status of each screen.EnglishCAM_01CAM_

EnglishvChapter 5 Menu SetupBefore Use1. System2. Camera3. Monitoring4. Recording Mode5. Event Record Mode6. Schedule7. Backup8. Network9. Network Set

EnglishSHR-2040/2041/2042 USER’S MANUAL4-3Definition of Live Screen ModeThe system receives 3 live images and displays them in the following 3 modes.●

English4-4Selecting Live Screen ModeEach mode may be selected by [MODE Button] and [CH1 ~ CH4 Button]. The following figure shows Live Mode after conv

English3Live Channel Selection and Audio On/Off SetupIn other split modes than Full Screen Mode and Auto Sequence Mode, you can choose a channelto be

English4-64Freeze and ZoomFreeze FunctionFreeze function pauses the video image in the Live Screen, it is only available in the Live Mode.You can set

English5Event MonitoringEvent monitoring displays the channel synchronized with a event on the screen when a specialevent (Sensor/Motion/Video Loss)

English4-86Spot-out MonitoringSpot-out Monitoring has nothing to do with Live Screen Output, it monitors the full screen of acertain channel. If you s

SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 4-9

Chapter 5 Menu SetupSHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 5

EnglishBefore Use5-1● SelectionThe yellow cursor shows the current window. Use the ,,¦,  key in the front to movethe cursor on your desirous menu.

1System5-2● System Menu has the following items in detail.English● DatePress the “Enter” key and the ¦,  key to move to Y/M/D. Use the , key to ch

EnglishviChapter 9 Smart Viewer1. Introduction2. Feature3. PC Specification(Recommendation)4. Smart Viewer Installation5. Smart Viewer Program Executi

EnglishSHR-2040/2041/2042 USER’S MANUAL5-3● Date FormatThe system supports 3 formats, YYYY-MM-DD / DD-MM-YYYY / MM-DD-YYYY.● Time FormatThe system sup

English5-4● DST (Daylight Saving Time)DST sets the clock one hour ahead the local standard time. This setting enablesthe system to display the time ad

EnglishSHR-2040/2041/2042 USER’S MANUAL5-5Load Factory Default● It used to initialize all the menu setup values. The recorded data will not be deleted

English5-6System Log● System Log is used to check the important record by an administrator.● It displays such contents of a system related log and its

EnglishSHR-2040/2041/2042 USER’S MANUAL5-7System Information and SetupThis setup window provides the following setting items:●Software Version: Displa

English5-8Storage SetupYou can configure the storage device related settings.Note 1Note 1• The capacity of the HDD may differently appear in the Stora

EnglishSHR-2040/2041/2042 USER’S MANUAL5-9Note 1Note 1[Internal HDD]This is a physical hard disk connected with the IDE cable inside the SHR-2160/2162

English5-10Note 2Note 2[ATA]Usage : Internal HDDThis is a physical hard disk connected with the IDE cable inside the SHR-2160/2162/2080/2082 mainbody.

EnglishSHR-2040/2041/2042 USER’S MANUAL5-11Export/Import the ConfigurationThis menu is used to export or import the DVR-related settings to/from the U

English5-12Remote control Device● MENU for the use of Samsung system keyboardDevice Samsung System KeyboardCancelRemote Control DeviceOK ID Baudrate

Chapter 1 OverviewSHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 1

EnglishSHR-2040/2041/2042 USER’S MANUAL5-13System Shutdown● Terminates the work in action safely and turns the power off. Press “OK” in the confirmati

English5-142Camera ● The detailed Camera Menu items are as follows.● VideoOn : Camera images from a selected channel appear.Off : Camera images from a

English● TitleYou can name the camera of selected channel.If you press the [Enter] key, the Virtual keyboard will come out.Virtual KeyboardIf you mo

English5-16PTZ Device ● IDIt is an ID for PTZ Camera and available to set from 0 to 255.● ProtocolIt is supported by the PTZ device.The followi

EnglishScreen SetupSHR-2040/2041/2042 USER’S MANUAL5-17● It is a window to set Brightness/Contrast/Color for the camera image of each channel. Put the

English5-183Monitoring● Event MonitoringIt is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous.① Off : Event Monitoring does

English● Monitor You are not allowed to connect VGA OUT and Composite / S-Video OUTsimultaneously. Consequently, the user is obliged to choose either

English5-204Recording ModeRecord Mode●Details for Record Mode Menu are as follows. If you press the front “REC” button, the mode value to be recorded

EnglishSHR-2040/2041/2042 USER’S MANUAL5-21● Video sizeIt sets the video to be recorded.Half D1 : (NTSC) 720x240(N) ➝ Normal (PAL) 720x288(N) ➝ Normal

English5-225Event Record Mode● The detailed items of Event Record Menu are as follows.Event Record Mode setup ● Event Record Mode setup Sets a mode to

1Introduction1-1The Digital Video Recorder(DVR) compresses the 4 channel of camera input data into theMPEG4 video file and the 4 channel of voice inpu

EnglishSHR-2040/2041/2042 USER’S MANUAL5-23● QualityQuality will be determined.Select the one among Very High / High / Standard / Low ● RateSets the R

English5-24Alarm Detection Setup ● Off : Sensor does not operate.① N.O(Normal Open) Sensor : Sensor remains open all the time and if closed, an alarm

EnglishSHR-2040/2041/2042 USER’S MANUAL5-25Motion Detection Setup ● Motion Detection ModeOff : Motion Detection does not operateOn : Motion Detect

English5-26● SensitivitySets the sensitivity of motion detection. Sensitivity: 1(L), 2, 3, 4, 5, 6, 7, 8, 9, 10(H).● Alarm-OutSets the Alarm-Out when

EnglishSHR-2040/2041/2042 USER’S MANUAL5-276ScheduleThis setup selects a time to record automatically.Selection by the day or by the time is available

English5-28The scheduling is enabled by selecting alarms, days and time blocks. The default setting isEvent Driven. For each alarm or beep, you can ac

EnglishSHR-2040/2041/2042 USER’S MANUAL5-297Backup● If there is a device, the free space and the backup device is displayed.● Select a date, time, and

English5-308Network● Connection ModeDesignates the kind of the network connected to the main body of SHR-2040/2041/2042.Static IP : When the main body

EnglishSHR-2040/2041/2042 USER’S MANUAL5-31Transfer Protocol Settings CautionCautionIn case of ADSL, the audio is not played in the SmartViewer.Cautio

English5-32● You may select either TCP or UDP for the protocol type.If you select ADSL from the IP setup page, only TCP is available.While TCP is sele

2Features1-2 4 CH Composite Input Connectors NTSC / PAL Video Source Compatible( NTSC : SHR-2040 / SHR-2041 / SHR2042, SHR-2040N / SHR-2041N / SHR-2

EnglishSHR-2040/2041/2042 USER’S MANUAL5-33Callback Settings● The Callback function is used to forward a callback message to the IP where SmartVieweri

English5-349Network SetupPort Setup for SmartViewer Connection● The Port value for DVR registration of SmartViewer (Setup ➝ Site Setup) shall be assam

SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 6

Chapter 6 PTZ Camera ControlSHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 7

1PTZ Camera Control Mode6-1● Select a proper PTZ camera Configuration value in MENU to enter PTZ Control Mode.English● Selected in MENU, the PTZ symbo

English6-2● Other PTZ Camera Control Modes perform its control in a single screen. Press the channelselection button in the left front to select the P

SHR-2040/2041/2042 USER’S MANUAL2Basic Operation of PAN, TILT, & ZOOM6-3● PANPress the LEFT or RIGHT button in front SHR-2040/2041/2042 in PTZ Cam

3Preset Setup6-4● Records a certain position of PTZ Camera.● Memorizes up to 20 PTZ Camera positions at the moment.English● Press the Preset button in

EnglishSHR-2040/2041/2042 USER’S MANUAL6-5● Move the cursor to right and press ENTER in PTZ Control Mode first. Then, press the“Enter” to run P/T/Z/ o

4Camera Menu Setup6-6● Camera Menu is a menu supplied by PTZ Camera itself. This Menu sets up several conditions of PTZ Camera.English● Press the Pres