Samsung SPINPOINT V40 Series User Manual download pdf

MODEL 500DHD

DUAL HARD DRIVE CARD

The IED Model 500DHD Dual Hard Drive Card is a component of the IED 500ACS An

nouncement Control System. It is used for non-volatile storage of programs and data

such as the operating system, the control program, the configuration files, and perma

nent message takes.

The 500DHD features RAID 1 technology to provide a continuous backup of all informa

tion stored on the hard drive in order to safeguard against accidental loss of data and to

assure uninterrupted operation.

500DHD DRIVE REPLACEMENT PROCEDURE

NOTE: The drive replacement procedure requires that the ACS be offline for as much as

1 hour, depending in part on drive capacity.

In the event of a drive failure, the following procedure describes the recommended

method for replacement of the failed drive:

1. Shut down the power to the ACS mainframe.

2. Remove the faulted hard drive from the 500DHD. To accomplish this, first,

remove the 500DHD from the mainframe. Next, disconnect the data ribbon and

power supply cables from the faulted hard drive. Finally, remove the four screws

that attach the hard drive to the PCB.

3. Attach the new hard drive to the 500DHD. Make sure that the new hard drive is

of the same brand and model (Samsung SpinPoint™ V40 Series) and of equal or

greater capacity than the one it is replacing. Furthermore, it is recommended that

the new hard drive have the same number of read/write heads as the hard drive it

will be mirroring.

Attach the new hard drive securely to the PCB using the four screws you removed

in step one. Next, attach the power supply cable and the data ribbon cable to the

new hard drive.

4. Return the 500DHD to the mainframe. Re-attach the data ribbon cable between

the 500-CPU to the 500DHD.

5. Apply power to the mainframe. Once the mainframe is powered on, wait until the

blue boot menu appears and select option two (2. DOS) and press <enter>.

Once the computer has come to rest at the DOS prompt ( c:\> ), type “dupli” and

press <enter> to run the DupliDisk setup utility.

6. Initialize the replacement hard drive. Once the DupliDisk Setup Utility is

running, press <enter> and a message prompting you to initialize the

replacement hard drive will appear. If you replaced the primary drive, you should

select “Initialize drives using the mirror drive initialization” and press <Enter>.

Otherwise, if you replaced the mirrored drive, select “Initialize using the primary

drive initialization” and press <Enter>. You should then be prompted by the

DupliDisk Setup Utility to press <Enter> to reboot the 500DHD. If not prompted,

simply continue with step 7, “Synchronize the replacement hard drive”.

500 SERIES AUDIO CONTROL SYSTEM AUG 2002 SECTION 3 GROUP 58 SUB B PAGE 1

INSTALLATION INSTRUCTIONS MODEL 500DHD DUAL HARD DRIVE CARD

Last Edit: 07/10/02 12:49 pm

1 2 3 4 5 6

Summary of Contents

Page 1 - MODEL 500DHD

MODEL 500DHDDUAL HARD DRIVE CARDThe IED Model 500DHD Dual Hard Drive Card is a component of the IED 500ACS An-nouncement Control System. It is used fo

Page 2

If you are not prompted to initialize the drives as described in the precedingparagraph, then you will be prompted to rebuild the replacement drive. U

Page 3

on drive failure” and press <enter>, select “Continuously” and press<enter>.D. Highlight “Beep after cold boot if drive failure is detecte

Page 4 - MIRRORED DRIVE

SECTION 3 GROUP 58 SUB B PAGE 4 AUG 2002 500 SERIES AUDIO CONTROL SYSTEMMODEL 500DHD DUAL HARD DRIVE CARD INSTALLATION INSTRUCTIONSInnovative Electron

Page 5 - 3 GROUP 58 SUB B PAGE 5

500 SERIES AUDIO CONTROL SYSTEM AUG 2002 SECTION 3 GROUP 58 SUB B PAGE 5INSTALLATION INSTRUCTIONS MODEL 500DHD DUAL HARD DRIVE CARDMOUNTING SCREWSPRIM

Page 6

This page left blank intentionallySECTION 3 GROUP 58 SUB B PAGE 6 AUG 2002 500 SERIES AUDIO CONTROL SYSTEMMODEL 500DHD DUAL HARD DRIVE CARD INSTALLATI

Comments to this Manuals

No comments

Samsung SPINPOINT V40 Series User Manual

Browse online or download User Manual for Disk arrays Samsung SPINPOINT V40 Series. MODEL 500DHD [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for Disk arrays Samsung SPINPOINT V40 Series