Samsung 460DRN-S User Manual

iiLCD DISPLAYquick start guide460DRN-S,460DR-S

Changing the SOURCE is only allowed for external devicesthat are connected to the monitor at the time.19. ENTER/PRE-CHThis button is used to retu

30. PIPEvery time you press the button, a PIP screen appears.- This fuction does not work for this LCD Display.31. SWAPSwaps the contents of the PIP a

Mechanical Layout (PORTRAIT type)Installation VESA Bracket (LANDSCAPE type)•When installing VESA, make sure to comply with the international VESA stan

DimensionsNoticeFor securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12mm length.Installation VESA Bracket (PORTRAIT

DimensionsNoticeFor securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12mm length.Wall Bracket Installation• Contact a

Wall Bracket(1) Hinge(Left 1, Right1)PlasticHanger(4)Screw(A)(11)Screw(B)(4)Anchor(11)Wall Bracket Assembly NoteThere are two hinges(left and right)

A - Length between the two locking holes3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bitto drill holes deep

2. Insert the screw B into the plastic hanger.Notice• Mount the product on the wall bracket and make sure it is properly fixed to the leftand right pl

A - LCD DisplayB - Wall BracketC - WallWall Bracket Angle AdjustmentAdjust the bracket angle to -2° before installing it on the wall.1. Fix the produc

ConnectionsConnecting a ComputerUsing a Power cord with Earth• In the event of failure, the earth lead may cause electric shock. Makesure to wire the

IntroductionPackage Contents NotePlease make sure the following items are included with your LCD Display.If any items are missing, contact your dealer

Connect the audio cable for your LCD Display to the audio port on the backof your computer. Note•Turn on both your computer and the LCD Display.• The

NoteThe LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRsor Camcorders. You may enjoy AV signals as long as the LCD

Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audiooutput terminals of the digital output device, and connect

NoteConnect the LAN cable.(Applicable to the DRN-S model only)Connecting a USB deviceUsing a Power cord with Earth• In the event of failure, the eart

(Applicable to the DRN-S model only)Connections

TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center forproblems that

Clean with a soft cloth (cotton flannel) smoothly.• Never use acetone, benzene or thinner.(They may cause flaws or deformation of the screensurface.)•

Problems related to the Screen NoteProblems related to the LCD Display screen and their solutions are listed.Q:The screen is blank and the power indic

A: Adjust color using Custom under OSD Color Adjustment menu.Q:The color white is poor.A: Adjust color using Custom under OSD Color Adjustment menu.Q:

A: Check if the power cord is securely connected.A:Check if a special fluorescent or neon lamp is on in the vicinity.Problems related to MagicInfo Not

UnpackingLANDSCAPE type PORTRAIT typeManualsQuick Setup Guide Warranty Card(Not available in all loca-tions)User's Guide, MagicInfoSoftware CD, M

A: Windows ME/2000:Set the resolution at the Control Panel → Display → Screen Saver.Set the function in the BIOS-SETUP of the computer. (Refer to the

Your LCD DisplayFrontPower button [ ]Use this button for turning the LCD Display on and off.D.MENUOpens the on-screen D.MENU. NoteThis is available wh

Note•The TV menu is available when a TV tuner box is installed.• DR-S model can use MagicInfo menu when mounted Network box.ENTER button [ENTER]Activ

POWER S/W ON [ │ ] / OFF [O]Switches the LCD Display On/Off. POWER INThe power cord plugs into the LCD Displayand the wall plug. RS232C OUT/IN (RS23

DVI / PC / HDMI IN [DVI(HDCP)] (PCVideo Connection Terminal)Using a DVI Cable (DVI-D to DVI-D) - DVImode (Digital PC) DC OUT [5V/1.5A]Connec

Remote Control NoteThe performance of the remote control may be affected by a TV or other electronic deviceoperating near the LCD Display , causing a

PIPSWAP1. POWERTurns the product On.2. OffTurns the product Off.3. Number ButtonsPress to change the channel.4. DEL buttonThe "-" button