Samsung 2443BW User Manual

SyncMaster 2443BW/2443BWXLCD MonitorUser Manual

Type4Monitor & HAS standManualsQuick Setup Guide Warranty Card(Not available in all loca-tions)User's GuideCablesD-Sub Cable Power Cord DVI C

Your MonitorInitial SettingsSelect the language using the up or down key.The displayed content will disappear after 40 seconds.Turn the Power button o

You can customize key assignment for the Custom button according to your pref-erences. NoteYou can configure the customized key for a required functio

Simple Stand HAS StandPOWER portConnect the power cord for your monitor to the POWER port on the back of theproduct.DVI IN portConnect the DVI Cab

• Fix the cables using the holding ring, as shown in the figure.Introduction13

ConnectionsConnecting Cables Connect the power cord for your monitor to the power port on the back of the monitor.Plug the power cord for the monitor

High speed Full speed Low speedData Rate 480 Mbps 12 Mbps 1.5 MbpsPower Consumption 2.5 W(Max., each port)2.5 W(Max., each port)2.5 W(Max., each port)

NoteWhen connecting a device to the DOWN port of the monitor, connect the device using acable appropriate to the device.(For the purchase of the cab

A. Stand StopperAttaching a BaseThis monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.Simple Stand HAS StandA. MonitorB. Mounti

Using the SoftwareMonitor Driver NoteWhen prompted by the operating system for the monitor driver, insert the CD-ROMincluded with this monitor. Driver

Safety InstructionsNotational NoteThese safety instructions must be followed to ensure your safety and prevent property damage.Make sure to read the i

NoteThis monitor driver is under certifying MS logo, and this installation doesn't damage your system.The certified driver will be posted on Sam

NoteThis monitor driver is under certifying MS logo, and this installation doesn't damage your system.The certified driver will be posted on Sam

9. Select the model that matches your monitor from the list of monitor models on the screen, andclick "Next". 10.Click "Close" → &

1. Insert CD into the CD-ROM drive.2.Click "Start" → "Control Panel" then click the "Appearance and Themes" icon.3. Clic

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the modellist and click the "Next" button.

10. Monitor driver installation is completed.Microsoft® Windows® 2000 Operating SystemWhen you can see "Digital Signature Not Found" on you

4. Select the "Monitor" tab.5. Click the "Change" button in the "Monitor Type" area.6. Choose "Specify the location

Natural ColorNatural Color Software ProgramOne of the recent problems in using a computer is that the color of the images printed out by a printeror o

Installation1. Insert the installation CD into the CD-ROM drive.2. Click the MagicTune™ installation file. NoteIf the popup window to install the soft

UninstallThe MagicTune™ program can be removed only by using the "Add or Remove Programs" option ofthe Windows® Control Panel.Perform the fo

Ensure that the power plug is plugged into the power outlet firmly andcorrectly.• Otherwise, this may result in fire. Do not forcefully bend or pull

5. Select "I agree to the terms of the license agreement" to accept the terms of use.6. Choose a folder to install the MagicRotation program

• Windows ME• Windows NT 4.0• Windows 2000• Windows XP Home Edition• Windows XP Professional•Windows Vista™Hardware• 128 MB Memory above (recommended)

Using the Software31

Adjusting the MonitorDirect FunctionsAUTOWhen the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the animatedscree

When pressing the MENU button after locking the OSDThis is the function that locks the OSD in order to keep the current states of settings or prevent

NoteThough the OSD adjustment lock function is activated, you can still adjust the brightness and contrast,and adjust Customized Key () using the Dir

BrightnessWhen OSD is not on the screen, push the Brightness ( ) button to adjust brightness.SOURCESelects the video signal while the OSD is off.Adjus

OSD FunctionPicture Brightness Contrast MagicBrightColor MagicColor Color Tone Color Con-trolColor Effect GammaImage Coarse Fine Sharpness H-Position

You can use the on-screen menus to change the contrast according to personal preference.( Not available in MagicColor mode of Full and Intelligent. )M

Game, Sport, Movie and Dynamic Contrast. Each mode has its own pre-configured brightness value.You can easily select one of seven settings by simply p

DO NOT PLACE CANDLES,MOSQUITO REPELLANT,CIGA-RETTES AND ANY HEATING APPLIANCES NEAR THE PROD-UCT.• Otherwise, this may cause fire. Keep heating

MagicColorMagicColor is a new technology that Samsung has exclusively developed to improve digital imageand to display natural color more clearly with

Color ToneThe tone of the color can be changed and one of four modes can be selected.• Cool - Makes whites bluish.• Normal - Keeps whites white.• Warm

Color ControlAdjusts individual Red, Green, Blue color balance.( Not available in MagicColor mode of Full and Intelligent. )MENU → , → → , →

• Off • Grayscale • Green • Aqua • Sepia• Off - This applies an achromatic color to the screen to adjust the screen effects.• Grayscale - The default

ImageCoarseRemoves noise such as vertical stripes.Coarse adjustment may move the screen image area. You may relocate it to the center usi

FineRemoves noise such as horizontal stripes.If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).(Avai

( Not available in MagicColor mode of Full and Intelligent. )MENU → , → → , → → , → MENUH-PositionChanges the horizontal position of t

Changes the vertical position of the monitor's entire display.(Available in Analog mode only)MENU → , → → , → → , → MENU OSDLangu

H-PositionYou can change the horizontal position where the OSD menu appears on your monitor.MENU → , → → , → → , → MENUV-PositionYou c

TransparencyChange the transparency of the background of the OSD.• Off • OnMENU → , → → , → → , → MENUDisplay TimeThe menu will be auto

Clean the product using a soft cloth with a monitor cleaner only. Ifyou must use a cleaner other than the monitor cleaner, dilute it with waterat a r

• 5 sec • 10 sec • 20 sec • 200 secMENU → , → → , → → , → MENU SetupResetReverts the product settings to factory defaults.• No • YesME

Customized KeyYou can specify a function which will be activated when the Customized Key ( )is pressed.MENU → , → → , → → , →MENU50Auto

You can change the size of the screen displayed on your monitor.Adjusting the Monitor51

• Auto • Wide• Auto - The screen is displayed in accordance with the screen aspect ratio of the input signals.• Wide - A full screen is displayed rega

TroubleshootingSelf-Test Feature Check NoteYour monitor provides a self test feature that allows you to check whether your monitor is functioningprope

noisy, and video mode not supported, etc. In this case, first check the source of the problem, and thencontact the Service Center or your dealer.Judgi

A: If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1920x 1200 60 Hz" message is displayed. If the di

Q: The screen can be unbalanced due to the cycle of the video card signals. Readjust Position byreferring to the OSD.The screen is out of focus or OSD

http://www.samsung.com/monitor/magictuneMagicTune™ doesn't work properly.Q: Have you changed your PC or video graphic card?A: Download the latest

* Contact the video card manufacturer for details.Q: How can I set the Power Saving function?A: Windows XP:Set the resolution in the Control Panel → A

When you drop the product or the case is broken, turn the power offand disconnect the power cord. Contact a Service Center.• Otherwise, this may resu

SpecificationsGeneralGeneralModel NameSyncMaster 2443BWLCD PanelSize 24 inch (61cm)Display area 518.4mm(H) X 324.0mm(V)Pixel Pitch 0.270mm(H) X 0.270m

Dimensions (W x H x D) / Weight (HAS Stand)556.2 x 432.2 x 250.0 mm / 21.9 x 17.0 x 9.8 inch (With Stand), 7.7 kg / 17.0 lbsVESA Mounting Interface100

This monitor is EPA ENERGY STAR® compliant and EN-ERGY2000 compliant when used with a computer equippedwith VESA DPM functionality.As an ENERGY STA

user. The frequency of this repetition is called the VerticalFrequency or Refresh Rate. Unit: HzGeneralGeneralModel Name SyncMaster 2443BWXLCD PanelSi

Dimensions (W x H x D) / Weight (HAS Stand)556.2 x 432.2 x 250.0 mm / 21.9 x 17.0 x 9.8 inch (With Stand), 7.7 kg / 17.0lbsVESA Mounting Interface100m

This monitor is EPA ENERGY STAR® compliant and EN-ERGY2000 compliant when used with a computer equippedwith VESA DPM functionality.As an ENERGY STA

user. The frequency of this repetition is called the VerticalFrequency or Refresh Rate. Unit: HzSpecifications65

InformationFor Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computeras described below to enjoy the b

when switching to a new video image. All display products, including LCD, are subject toimage retention. This is not a product defect.Please follow th

Ex)• Every 30 minutes, change the characters with movement.Ex) The best way to protect your monitor from Image retention is to set your PC or Systemto

If you continually move closer to the product screen, your eyesightmay be failing. To ease eye strain, take at least a five-minute break after every

Our LCD Monitor satisfies ISO13406-2 Pixel fault Class IIInformation69

AppendixContact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact the SAMSUNGcustomer care cent

EuropeGERMANY 01805 - SAMSUNG(726-7864)(€ 0,14/Min)http://www.samsung.comHUNGARY 06-80-SAMSUNG(726-7864) http://www.samsung.comITALIA 800-SAMSUNG(72

Asia PacificTAIWAN 0800-329-999 http://www.samsung.com/twVIETNAM 1 800 588 889 http://www.samsung.comMiddle East & AfricaSOUTH AFRICA 0860-SAMSUNG

Correct DisposalCorrect Disposal of This Product (Waste Electrical & Electronic Equipment) -Europe only(Applicable in the European Un

Do not use a humidifier or kitchen table near the product.• Otherwise, this may result in electric shock or fire. When there is a gas leak, do not to

IntroductionPackage Contents NotePlease make sure the following items are included with your monitor.If any items are missing, contact your dealer.Con