iiLCD MONITORquick start guide460UT, 460UTn
built-in high fidelity stereo amplifier. Then press the buttonagain to circle through available preconfigured modes.( Standard → Music → Movie → S
MTS-You can select MTS (Multichannel Television Stereo) mode.Audio Type MTS/S_Mode DefaultFM Stereo Mono Mono ManualChangeStereo Mono ↔ StereoSAP Mono
Assembling the bracket panelBefore mounting the set’s outer cover after installing a Video Wall or Samsung UD, removethe stickers attached to the conn
ConnectionsConnecting a ComputerUsing a Power cord with Earth• In the event of failure, the earth lead may cause electric shock. Makesure to wire the
Using the BNC (Analog) connector on the video card.• Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, Vports on the back of your LCD Disp
3. Select AV using the SOURCE . NoteThe LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRsor Camcorders. You may enjo
1. Connect a set of audio cables between the AV AUDIO IN [L-AUDIO-R] on the LCD Dis-play and the AUDIO OUT jacks on the DVD player.2. Connect a Compon
Connecting Using a HDMI Cable Note• Input devices such as digital DVD are connected to the HDMI terminal of the LCD Displayusing the HDMI cable.• You
Connecting a LAN CableUsing a Power cord with Earth• In the event of failure, the earth lead may cause electric shock. Makesure to wire the earth lead
TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center forproblems that
IntroductionPackage Contents NotePlease make sure the following items are included with your LCD Display.If any items are missing, contact your dealer
• Do not use benzene, thinner or other flammable sub-stances, or a wet cloth.•We recommend that a SAMSUNG cleansing agentis used to prevent damage to
A: Check if the signal cable between the computer and the LCD Display is securely con-nected.(Refer to Connecting a Computer)Q: Shadowiness on the fri
Q: The image is too light or too dark.A:Adjusts the brightness and contrast.(Refer to the Brightness, Contrast)Q: The screen color is inconsistent.A:
Problems related to the Remote Control NoteProblems related to the remote control and their solutions are listed.Q: The remote control buttons do not
A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using eithera cleaning solution or plain water.Do not leave any deterge
Others(Not available in all loca-tions) BNC to RCA Adaptor Jack Sold separatelyDVI Cable Wall Mount KIT LAN Cable(Applicable to the UTnmodel only
Your LCD DisplayFront NoteThe buttons are on the right at the back of your product.MENU button [MENU]Opens the on-screen menu and exits from the menu.
Note• This is available when a TV tuner box is installed.Power button [ ]Use this button for turning the LCD Display on and off.Brightness SensorThe
RS232C OUT/IN (RS232C Serial PORT)MDC(Multiple Display Control) Program Port DVI / PC / HDMI IN [DVI/PC/HDMI AU-DIO IN] (PC/DVI/HDMI Audio Connec
BNC/COMPONENT OUT[R/PR, G/Y, B/PB, H, V](BNC/Component Connection Terminal(Output))BNC (Analog PC) Connection: connectingthe R, G, B, H, V port
Using the Anti-Theft Kensington Lock1. Insert the locking device into the Ken-sington slot on the Monitor and turnit in the locking direction .2
RETURNUp-Down Left-Right buttons EXIT SRSMagicInfoP.MODE DUAL/MTSPIPSWAP1. POWERTurns the product On.2. OffTurns the product Off.3. Number Buttons
Comments to this Manuals