NETWORK CAMERAUser ManualSND-5084R/SNV-5084R
overview10_ overviewRECOMMENDED PC SPECIFICATIONS • CPU : Intel Core 2 Duo 2.4 GHz or higher (for using 1920x1080 30 fps) Intel Core i7 2.8 GHz or
setup screenTo make recording on the Micro SD memory1. Check the memory card’s <Free size> and <Total size>.2. Otherwise, check the stor
Alarm inputYou can set the alarm input type, activation time, and operation mode.1. From the Setup menu, select the <Event ( )> tab.2. Click
setup screen7. Specify an operation that will perform if an alarm occurs. • FTP : Specify the use of FTP transfer in the alarm input setup. • E-mail
Tampering detectionYou can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and
setup screenMotion detection / Video analyticsEvents of motion detection and video analysis can be set to trigger event signal output.1. From the Set
J `Motion detection and Video analytics cannot be used simultaneously. `Before using, set the minimum and maximum motion sizes to suit desired motion
setup screenTo use Motion detectionIt detects a motion that meets all conditions specified by sensitivity, size and area.1. Select a motion detection
4. Select <Area> tab. You can specify an area on the screen to include or exclude the area to/from detection. You can specify up to 4 areas. •
setup screenTo use Video analyticsIt detects event that meets all conditions specified by sensitivity, size and area and the event condition rules.1.
To set the video analysis rules `Passing1. Set the type to <Passing>.2. On the screen, click on preferred starting and ending point of the vir
English _11● OVERVIEWWHAT’S INCLUDEDPlease check if your camera and accessories are all included in the product package.Appearance Item NameQuantityD
setup screen `Appearing (Disappearing)1. Set the analysis type to <Appearing (Disappearing)>.2. Select the desired event rule: • Defined area
Face detectionYou can set to detect recognized face and trigger an event accordingly.1. From the Setup menu, select the <Event ( )> tab.2. C
setup screenAudio detectionYou can set to detect sound over the specified level and trigger an event accordingly.1. From the Setup menu, select the &
Network disconnection You can receive and save events of a physically disconnected network.1. From the Setup menu, select the <Event ( )> tab.
setup screenAlarm output setup1. From the Setup menu, select the <Event ( )> tab.2. Click <Alarm output setup>.3. Set the camera’s ty
SYSTEM SETUPProduct information1. From the Setup menu, select the <System ( )> tab.2. Click <Product information>.3. Check the camera
setup screenDate & Time1. From the Setup menu, select the <System ( )> tab.2. Click <Date & Time>.3. Specify the time and dat
User1. From the Setup menu, select the <System ( )> tab.2. Click <User>.3. Provide the necessary user information. • Administrator pa
setup screen -If the existing password is not matched, when you change the admin password, you cannot change the password. -After changing your passwo
Upgrade / Reboot1. From the Setup menu, select the <System ( )> tab.2. Click <Upgrade / Reboot>.3. Select a desired item and set it
overview12_ overviewAppearance Item NameQuantityDescription Model NameTemplate1Product installation guide SND-5084R/ SNV-5084RAlarm Cable 1 Useful for
setup screen M `It may take a max of 20 minutes for the upgrade process. If you forcibly terminate the upgrade process, upgrade will not be completed
LogYou can check the system log or event log.1. From the Setup menu, select the <System ( )> tab.2. Click <Log>.3. Select a log type.
setup screenProfile accessYou can check the profile information.1. From the Setup menu, select the <System ( )> tab.2. Click <Profile acce
appendixSPECIFICATIONItemsDescriptionSND-5084R SNV-5084RVideoImaging Device 1/3” PS Exmor 1.37M CMOS (IMX238)Total Pixels 1,312(H) x 1,069(V)Effective
appendixItemsDescriptionSND-5084R SNV-5084ROperationalIR LED 12 eaViewable Length 30m(98.43ft)Camera Title Off / On (Displayed up to 40 characters)Day
ItemsDescriptionSND-5084R SNV-5084ROperationalIntelligent Video AnalyticsAudio Detection, Face Detection, Tampering, Virtual Line, Enter/Exit, Appear
appendixItemsDescriptionSND-5084R SNV-5084RNetworkVideo Quality AdjustmentH.264 : Compression Level, Target Bitrate Level ControlMJPEG : Quality Leve
ItemsDescriptionSND-5084R SNV-5084RNetworkApplication Programming InterfaceONVIF Profile-SSUNAPI(HTTP API)SVNP 1.2Webpage LanguageEnglish, French, Ger
appendixPRODUCT OVERVIEWSND-5084RUnit : mm (inch)128_ appendix118 (4.65")Ø 132.1 (5.2")Ø 97 (3.82")107.6 (4.24")
SNV-5084RUnit : mm (inch)English _129● APPENDIX69.5 (2.74")118.5 (4.67")Ø 160 (6.3")Ø 100 (3.94")
English _13● OVERVIEWAppearance Item NameQuantityDescription Model NameTapping Screw 3Used for installation on the wall or ceilingSNV-5084RPlastic A
appendixTROUBLESHOOTINGPROBLEM SOLUTIONI can’t access the camera from a web browser. yCheck to make sure that the camera’s Network settings are approp
PROBLEM SOLUTION<Motion detection / Video analytics> of <Event setup> is set to <Enable>, but no notification e-mail reaches me even
OPEN SOURCE ANNOUNCEMENTGPL/LGPL software licenseThe software included in this product contains copyrighted software that is licensed under the GPL/LG
GNU GENERAL PUBLIC LICENSEVersion 2, June 1991Copyright (C)1989, 1991 Free Software Foundation, Inc. 51 Franklin Street,Fifth Floor, Boston, MA 02110-
3. You may copy and distribute the Program (or a work based on it, under Section 2)in object code or executable form under the terms of Sections 1 an
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEP
Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on ge
5. Conveying Modified Source Versions.You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of
7. Additional Terms.“Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditio
In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an
overview14_ overviewAT A GLANCE (SND-5084R)AppearanceItem DescriptionaDome coverCase cover used to protect the lens and the main unit.bCamera CaseHous
OpenSSL Combined LicenseThe OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay licens
BSD LicenseSome software components of this product incorporate source code covered under the BSD license as follows.Component Name License URLnet-snm
3. Neither the name of the Regents of the University of California nor the names of its contributors may be used to endorse or promote products deriv
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
The MIT LicenseSome software components of this product incorporate source code covered under the MIT license as followsMIT License 2.0- Acewidget, b
1.11. ‘’Source Code’’ means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associa
3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a part
8.3. If You assert a patent infringement claim against Participant alleging that such Participant’s Contributor Version directly or indirectly infring
The Independent JPEG Group’s JPEG SoftwareThe software included in this product contains copyrighted software that is licensed under the JPEG license.
English _15● OVERVIEWComponentsaAUDIOOUTAUDIOINklm njifghecdb
T-Kernel License - This Product uses the Source Code of T-Kernel under T-License granted by the T-Engine Forum(www.t-engine.org)T-License [License Agr
Article 4. License of Source Code1. As provided for in this Article, T-Engine Forum shall provide, and grant a license to use, the Source Code free of
T-Kernel. Provided, however, that the Ported Source Code may be treated in the same way as the Modified Source Code until the time of registration her
authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redi
PHP 3.01 LicenseThe PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved.Component Name License URLphp-5.2.17 PHP 3.
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally f
SALES NETWORKSAMSUNG TECHWIN CO., LTD.Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL
overview16_ overviewItem DescriptionaInternal Cover It is a cover to protect the main body.bIllumination Sensor Detects incoming light to control the
English _17● OVERVIEWItem DescriptionjMicro SD Memory Card CompartmentCompartment for the Micro SD memory card.kAudio Out Jack Used to connect to spe
overview18_ overviewAT A GLANCE (SNV-5084R)AppearanceItem DescriptionaDome coverCase cover used to protect the lens and the main unit.bCamera CaseHous
English _19● OVERVIEWComponentsAC 24V / DC 12VRESETVID EOFWAFTN+ -a cbd efgh ji
Copyright ©2014 Samsung Techwin Co., Ltd. All rights reserved.Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product
overview20_ overviewItem DescriptionaIllumination Sensor Detects incoming light to control the IR LED.bLens Lens for the camera.cIR LED These infrared
English _21● INSTALLATION & CONNECTIONinstallation & connectionINSTALLATION (SND-5084R)Precautions before installationEnsure you read out the
installation & connection22_ installation & connectionInstallation1. Attach the installation template to the selected area and punch 3 holes
English _23● INSTALLATION & CONNECTIONINSTALLATION (SNV-5084R) J `This camera is waterproof and in compliance with the IP66 spec, but the jack co
installation & connection24_ installation & connectionInstallation1. Using the template provided as an accessory, drill the screw installatio
English _25● INSTALLATION & CONNECTIONConnecting waterproof power cable and LAN cable1. Remove the dome cover and the case.2. Pull out the long
installation & connection26_ installation & connection5. Insert the LAN cable into the large hole made by removing the projected part of the
English _27● INSTALLATION & CONNECTIONConnecting alarm cable1. Remove the dome cover and the case.2. Pull out the rubber plug on the bottom as
installation & connection28_ installation & connectionAttaching to the unbundled adapterChoose and purchase a necessary one of the following o
English _29● INSTALLATION & CONNECTIONOptional Accessories for InstallationFor your easier installation, you can purchase appropriate optional ac
English _3● OVERVIEWIMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instruc
installation & connection30_ installation & connection3. POLE MOUNT ADAPTOR(SBP-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM
English _31● INSTALLATION & CONNECTIONAdjusting the monitoring direction for the camera (SND-5084R/SNV-5084R) `Adjusting the monitoring direction
installation & connection32_ installation & connectionINSERTING/REMOVING A MICRO SD MEMORY CARD (SND-5084R/SNV-5084R) J `Disconnect the power
English _33● INSTALLATION & CONNECTIONRemoving a Micro SD Memory CardGently press down on the exposed end of the memory card as shown in the diag
installation & connection34_ installation & connectionMEMORY CARD INFORMATION (NOT INCLUDED)What is a memory card?The memory card is an extern
English _35● INSTALLATION & CONNECTIONCONNECTING WITH OTHER DEVICE J `The CVBS out terminal of the product is provided for easier installation, a
installation & connection36_ installation & connectionEthernet ConnectionConnect the Ethernet cable to the local network or to the Internet.Po
English _37● INSTALLATION & CONNECTIONPower Cable Specification for Each ModelIn case of DC 12V Input:Wire Type (AWG) #22 #20 #18Cable Length (Ma
installation & connection38_ installation & connectionConnecting to Audio Input/OutputAUDIOOUTAUDIOINNetworkPCMicrophoneSpeakerSpeakerSpeakerS
English _39● INSTALLATION & CONNECTION1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the
overview4_ overviewWARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJ
installation & connection40_ installation & connectionConnecting to the I/O port boxConnect the Alarm I/O cable to the corresponding port of t
English _41● INSTALLATION & CONNECTIONTo connect the external sensor Connect one strand of each signal line (2-strand) of the sensors to the [ALA
42_ network connection and setupnetwork connection and setupYou can set up the network settings according to your network configurations.CONNECTING TH
English _43● NETWORK CONNECTION AND SETUPCONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM1. Connect the user PC directly with the netw
44_ network connection and setupnetwork connection and setupCONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM1. Connect the user PC directly with the n
English _45● NETWORK CONNECTION AND SETUPCONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEMThis is for a small network environmen
46_ network connection and setupnetwork connection and setupBUTTONS USED IN IP INSTALLERItem DescriptionaDevice NameModel name of the connected camera
English _47● NETWORK CONNECTION AND SETUPItem DescriptiongURLDDNS URL address enabling access from the external Internet. However, this will be repla
48_ network connection and setupnetwork connection and setup3. In the <Address> pane, provide the necessary information. • MAC (Ethernet) Addre
English _49● NETWORK CONNECTION AND SETUPIf using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadban
English _5● OVERVIEWClass constructionAn apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing
50_ network connection and setupnetwork connection and setupAuto Network SetupRun <IP Installer_v2.XX.exe> to display the camera search list. At
English _51● NETWORK CONNECTION AND SETUPDYNAMIC IP SETUPDynamic IP Environment Setup • Example of the Dynamic IP environment - If a Broadband Router
52_ network connection and setupnetwork connection and setupPORT RANGE FORWARD (PORT MAPPING) SETUPIf you have installed a Broadband Router with a cam
English _53● NETWORK CONNECTION AND SETUPSetting up Port Range Forward for several network camerasWhen several network cameras are connected to one B
54_ network connection and setupnetwork connection and setupCONNECTING TO THE CAMERA FROM A SHARED LOCAL PC1. Run the IP Installer. It will scan for
English _55● WEB VIEWERweb viewerCONNECTING TO THE CAMERANormally, you would1. Launch the Internet browser.2. Type the IP address of the camera in
56_ web viewerweb viewerConnecting via UPnP1. Run the client or operating system in support of the UPnP protocol.2. Click the camera name for search
English _57● WEB VIEWERPASSWORD SETTINGWhen you access the product for the first time, you must register the login password. When the “Password chang
58_ web viewerweb viewerINSTALLING SILVERLIGHT RUNTIMEIf your PC has not installed Silverlight Runtime or has just installed an old runtime version, y
English _59● WEB VIEWERTo install on MAC OS1. Run the file trailing with “.dmg”.2. Run the install package file automatically created, ending with
overview6_ overviewPlease read the following recommended safety precautions carefully. yDo not place this apparatus on an uneven surface. yDo not inst
60_ web viewerweb viewer5. Click <Agree>.6. Click <Install>.7. Enter the password of the account currently logged in, and click <Ins
English _61● WEB VIEWERINSTALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, ins
62_ web viewerweb viewer5. Click [OK]. The old version of Web Viewer Plug-in is deleted.6. Click [Install] to begin installation of the Web Viewer P
English _63● WEB VIEWERUSING THE LIVE SCREENItem DescriptionaMonitoring Move to the monitoring screen.bPlayback Switch to the monitoring screen that
64_ web viewerweb viewerItem DescriptionhFull Screen Switch the current video to the maximum size of the monitor.iCapture Saves the snapshot as an ima
English _65● WEB VIEWERTo fit the full screen1. Click the [Full Screen ( )] button.2. This will fit the Viewer to the full screen.3. To exit the
66_ web viewerweb viewerPLAYING THE RECORDED VIDEO M `Before you can play the video, you must configure the record settings. For details on record set
English _67● WEB VIEWERTo play the content after searching by event 1. Click the [Playback ( )] button.2. Specify the start time and end time of
68_ web viewerweb viewerName of time search screen and its functionItem DescriptionaTime bar The section in the specific period is played by moving th
English _69● WEB VIEWERTo play after searching by time1. Click [Time Search ( )].2. Click a desired date in the calendar. The video on the specif
English _7● OVERVIEWCONTENTSOVERVIEW 33 Important Safety Instructions9 Product Features10 Recommended PC Specifications10 Recommended Micro SD/SD
70_ web viewerweb viewerTo back up the searched video1. During playback, click [ ] on the scene to back up. The scheduling window for backup start
English _71● WEB VIEWERTo Play an AVI File J `The AVI file does not contain the recording time data.1. Separate the micro SD memory card from the ca
setup screenSETUPYou can configure the video & audio, network, event and system settings of the camera in the network.1. In the Live screen, clic
• E-mail/FTP profile : Video profile to be transferred to the specified email or FTP site. `Only the MJPEG codec can be set as the E-mail/FTP profile
setup screenTo Add/Change the Video ProfileThe profile setup can be added or modified to accommodate various profiles depending on the recording condi
• Encoding priority : You can set the video transfer method to Framerate or Compression. • GOV length : It specifies the distance (in terms of numbe
setup screenTo Use Crop Encoding1. Select <Use>.2. Click <Set area>. The Crop Encoding Area Setup window will pop up.3. Select <Rati
Video setup1. From the Setup menu, select the <Video & Audio ( )> tab.2. Click <Video setup>.3. Select a <Video source> mod
setup screenAudio setup You can configure the I/O settings of the audio source from the camera.1. From the Setup menu, select the <Video & Aud
Camera setupYou can change the camera settings according to the environment where the camera is located.1. From the Setup menu, select the <Video
overview8_ overviewSETUP SCREEN 7272 Setup72 Video & Audio Setup87 Network Setup98 Event Setup115 System SetupAPPENDIX 123123 Specification128
setup screenTo Set SSDR (Samsung Super Dynamic Range)In a scene where the difference between bright and dark is severe, you can increase the brightnes
To Set BLCYou can specify a desired area on the video manually and set the area to be displayed more clearly.1. Select <Back light>.2. Set <
setup screenTo Set ExposureYou can adjust the exposure level of the camera.1. Select <Exposure>.2. Select each item and set it properly. • Bri
To Set Day/Night1. Select <Day/Night>.2. Select each item and set it properly. • Mode: Mode is used to adjust the color of Color or Black and
setup screenTo Setup Special1. Select <Special>.2. Select each item and set it properly. • Sharpness Mode : Adjust the overall sharpness of th
To Set OSD1. Select <OSD>.2. Select each item and set it properly. • Title overlay : It specifies if the camera name shall be displayed on the
setup screenFocus setupYou can adjust the focus and zoom ratio of video image.1. From the Setup menu, select the <Video & Audio ( )> tab.2
NETWORK SETUPInterface1. From the Setup menu, select the <Network ( )> tab.2. Click <Interface>.3. Set the <Interface> and <
setup screenPort1. From the Setup menu, select the <Network ( )> tab.2. Click <Port>.3. Type in each item in the Port menu as necessa
DDNSDDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easi
English _9● OVERVIEWPRODUCT FEATURES • Dustproof/Waterproof (IP66) (SNV-5084R)The dustproof and waterproof design makes you feel at ease when install
setup screenRegistering with DDNSTo register your product with the Samsung DDNS1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with
To connect to the Samsung DDNS in camera setup1. From the DDNS setup page, set <DDNS> to <Samsung DDNS>.2. Provide the <Product ID>
setup screenIP filteringYou can create a list of IPs that you want to grant or deny access to them.1. From the Setup menu, select the <Network (
SSLYou can select a secure connection system or install the public certificate for this purpose.1. From the Setup menu, select the <Network ( )&g
setup screen802.1xWhen connecting network, you can choose whether using 802.1x protocol, and then install the certification.1. From the Setup menu, s
QoSYou can specify the priority to secure a stable transfer rate for a specific IP.1. From the Setup menu, select the <Network ( )> tab.2. Cl
setup screen • Enable SNMP Trap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name
UPnP discoveryCameras can be automatically searched in the client and operating system in support of the UPnP protocol.1. From the Setup menu, select
setup screenEVENT SETUPFTP / E-mailYou can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC i
• E-mail configuration - Server address : Enter the IP address of the email server that you transfer the alarm or event images to. - Use authenticati
Comments to this Manuals