Samsung PN42C450B1DXZA User Manual download pdf

Step 1: Install the Stand

Follow the steps below to connect the TV to the stand.

✎

NOTE

Make sure to distinguish between the front and back of the Stand and

Guide Stand when assembling them.

Make sure that at least two people lift and move the PDP TV.

Stand the product up and fasten the screws. If you fasten the screws with

the PDP TV placed down, it may lean to one side.

1 With your TV upright, connect the

TV to the Stand as shown.

2 Fasten two screws (M4 X L16) at

position 1, and then fasten two

screws (M4 X L16) at position 2.

Rear

Front

Step 2: Install the Batteries into the Remote

To install batteries into your remote control, follow these steps:

1. Lift the cover on the back of the remote

upward as shown in the ﬁgure to the

right.

2. Install two AAA batteries.

✎

Make sure to match the +

and - ends of the batteries

to the diagram in the battery

compartment.

3. Replace the cover.

Step 3: Connect Power and Antenna or Cable

VHF/UHF Antenna

Connect Ant In to

• Wall cable jack

• VHF/UHF Antenna

• Cable or Satellite box

Ant or Cable Out

Make sure the AC power cord is plugged in securely to

the wall outlet and the TV.

Use a 75 ohm (round) cable.

Antenna Cable

(Not Supplied)

Quick Setup Guide

Congratulations on the purchase of your new Samsung TV.

Read this setup guide to get your TV up and running quickly.

1-800-SAMSUNG (1-800-726-7864)

Samsung Electronics America, Inc.

85 Challenger Road Ridgeﬁeld Park, NJ 07660-2112

Samsung Electronics Canada Inc.

55 Standish Court Mississauga, Ontario L5R 4B2

Call Center hours of operation: Mon-Sun, 9:00 AM -12

AM EST.

To register this product, visit: www.samsung.com/

STOP

Please do not return this unit.

If you have problems operating your

TV, call:

1-800-SAMSUNG (1-800-726-7864)

For web support please visit:

www.samsung.com/support

Step 4: Connect External Devices

Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)

Step 5: Run Plug & Play

When you turn on your TV for the ﬁrst time, it automatically launches the Plug &

Play function. With Plug & Play, you can select the On Screen Display language, set

the clock mode, and launch the TV’s channel memorizing process.

It also displays connection instructions similar to those in this guide.

To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow

buttons on your remote. To make a selection, press the ENTER

button.

To skip a screen, press the MENU button. To turn on your TV, press the POWER

button on the remote or on the TV. To run Plug & Play, follow these steps:

1 Using your remote control, select

the language for the On Screen

Display (OSD), and then press

the ENTER

button.

2 Select Home Use, and then

press the ENTER

button. If

you select Store Demo, the TV

will reset your picture and audio

settings every 30 minutes.

3 Select the Antenna source

to memorize, you must select

Antenna Source to same type

as your cable system type. After

selecting source, select Start;

then press the ENTER

button

on your remote.

✎

Most cable systems are Standard(STD) systems, If you are not sure about

what kind of cable system you have, contact your cable company.

✎

If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After

Plug & Play is complete, set your TV to Channel 3 or 4, according to the

directions for your cable or satellite box.

4 The TV memorizes the available

channels. This process can take

up to 45 minutes.

5 After the TV has memorized the

channels, choose the Clock

Mode. Select Auto if you have

a digital channel in your area.

Select Manual if you don’t, or

if you have a cable or satellite

box. When done, press the

ENTER

button.

✎

If you select Manual, the

clock setting screen appears.

6 Select the daylight savings time

setting: Off, On or Auto and then

press the ENTER

button.

✎

This function is only available

when the Clock Mode is set to

Auto.

7 Select the time zone in which you live, and then press the ENTER

button.

8 After the time zone screen, The connection method for best HD screen

quality is displayed. Press Right arrow button on your remote to view each

screen in succession. Press the Blue button to skip this section.

9 The Enjoy your TV. screen appears. Then press the ENTER

button.

If You Want to Rerun Plug & Play

1. Press the SOURCE button on your remote, then select TV mode.

2. Press the MENU button on your remote to display the menu.

3. Press the ▲ or ▼ button to select Setup, and then press the ENTER

button.

4. Press the ENTER

again to select Plug & Play.

Connecting an audio device (Home Theater, etc.)

Connect your TV to your Home Theater or other audio device to enjoy enhanced

Sound quality.

Connecting a PC

Connect your TV to a PC to use it as a Monitor.

HDMI IN 3

HDMI OUT

AUDIO OUT

VIDEO OUT

AUDIO OUT

COMPONENT OUT

AUDIO OUT

DVI OUT

Using an HDMI to DVI Cable

HD connection (up to 720p/1080i)

Very Good Connection

Device

Best Connection

HD connection (up to 720p/1080i)

Using an HDMI Cable

DVD, Blu-ray player, HD cable box, HD STB

(Set-Top-Box) satellite receiver

Device

Using a Component Cable

Good Connection

Component connection (up to 720p/1080i)

DVD, Blu-ray player, cable box,

STB satellite receiver, VCR,

Device

Use one of the connections below to connect your TV to an external A/V device. We recommend using

HDMI for the highest picture quality.

✎

When connecting to AV IN on the back of your TV, attach the video cable (yellow) to the green jack

next to the AV IN label. The jack will not match the color of the video cable (yellow).

Move

Enter

Select Language of the OSD.

Language :

Plug & Play

English

Español

Français

Move

Enter

Select ‘Home Use’ when installing this TV in your home.

Store Demo Home Use

Plug & Play

Move

Enter

Skip

Select the Antenna source to memorize.

Air

Cable

Auto

Start

Plug & Play

Move

Enter

Skip

Set the Clock Mode.

Clock Mode

Auto

Manual

Plug & Play

Move

Enter

Skip

Set to daylight saving time.

DST

Off

Auto

Plug & Play

48%

Enter

Skip

Auto Program in Progress.

DTV Air : -- Air : --

DTV Cable : -- Cable : -- Cable : 35

Stop

Plug & Play

BN68-02609A-02

Lowest Quality Connection

Using an Audio/Video Cable

Audio/Video connection (480i only)

DVD, Blu-ray player, cable box, STB satellite

receiver, VCR

Device

HDMI Cable (Not Supplied)

HDMI to DVI Cable

(Not Supplied)

Audio Cable (Not Supplied)

Audio Cable

(Not Supplied)

Component Cable

(Not Supplied)

Video Cable

(Not Supplied)

AUDIO IN

OPTICAL

Analog Audio connection

Digital Audio connection

Ampliﬁer / DVD home theater

Digital Audio System

Using an Audio Cable

Using an Optical Cable

Optical Cable (Not Supplied)

Audio Cable (Not Supplied)

DVI OUT

AUDIO OUT

PC OUT

HD connection

Using an HDMI to DVI Cable

Using a D-Sub Cable

HDMI to DVI Cable (Not Supplied)

D-Sub Cable (Not Supplied)

Audio Cable (Not Supplied)

[QSG-450]BN68-02609A-02Eng.indd 1 2010-09-03 오후 5:41:18

1 2

Summary of Contents

Page 1 - Quick Setup Guide

Step 1: Install the StandFollow the steps below to connect the TV to the stand. ✎NOTE xMake sure to distinguish between the front and back of the Stan

Page 2 - Step 6: Remote Control

Step 6: Remote ControlRemote Control Buttons and Functions ✎This is a special remote control for the visually impaired and has Braille points on the P

Related models: PN50C450B1DXZA

Comments to this Manuals

No comments

Samsung PN42C450B1DXZA User Manual

Browse online or download User Manual for Televisions Samsung PN42C450B1DXZA. Samsung PN42C450B1DXZA User Manual

Summary of Contents

Related models: PN50C450B1DXZA

Comments to this Manuals

Related products and manuals for Televisions Samsung PN42C450B1DXZA