EnglishVacuum Cleaneruser manual Thank you for purchasing a Samsung product.To receive a more complete service, please register your product atwww.sam
10_ Before using the vacuum cleanerUSING ACCESSORYCombination accessory (Option)Dusting brush Crevice tool12Accessories (Option)Install the accessory
Before using the vacuum cleaner _1102 BEFORE USING THE VACUUM CLEANERPipeAdjust the length of the pipe by sliding the length control button located in
12_ Operating cleanerPOWER CORDCAUTIONWhen removing the plug from the electrical outlet, grasp the plug, not the cord.CHECK FILTER ON/OFF The fi lter l
Operating cleaner _1303 OPERATING CLEANERPOWER CONTROLHose (controlled by radio frequency signals)ON/OFFSC20F70H / SC07F80H SeriesSelect a lower power
14_ Operating cleanerDUST SENSOR (OPTION)Dust Sensor Operations• Indicates the amount of dust being picked up and passing by the sensor which assist
Maintenance _1504 MAINTENANCECLEANING THE DUST BIN AND GRILLEEmpty the dust bin, if dust reaches 'MAX'or Check fi lter ( ) light is illumin
16_ MaintenancePush the button.Separate the dust bin from body.5Clean the dust bin and body with water.6Leave the dust bin and body in the shade until
Maintenance _1704 MAINTENANCECLEANING THE DUST FILTER1 2Pull the dust bin cover to open. Remove the fi lter from the dust bin.3 4Shake the fi lter to re
18_ MaintenanceCLEANING THE OUTLET FILTER1 2Take the dust bin out by lifting the handle. Pull out the HEPA Filter.3 4Shake the HEPA Filter to clean. I
Maintenance _1904 MAINTENANCEMAINTAIN FLOOR TOOLS2-Step Brush• Adjust the inlet lever according to the fl oor surface.CarpetFloor• Remove waste matte
ContentsYOUR VACUUM CLEANER07BEFORE USING THE VACUUM CLEANER0808 Assembly09 Using the UV brush (Option)09 Installing the Dust Sensor (Option)10 Usin
20_ MaintenanceTo remove dust from the dust bin of the UV brush (Option)When the dust bin is fi lled, turn the [Dust Removal] switch to empty the dust
Maintenance _2104 MAINTENANCEMini turbo brush (Optional Accessory)- To check brushrollCheck brushroll, when a clog is present or debris is visible.- T
22_ TroubleshootingTroubleshootingPROBLEM SOLUTIONMotor does not start.• Check cable, pulg and socket.• Leave to cool.Suction force is gradually dec
DJ68-00701F-01COUNTRY CUSTOMER CARE CENTER WEB SITEAUSTRALIA 1300 362 603 www.samsung.com/auHONG KONG 3698-4698www.samsung.com/hkwww.samsung.com/hk_en
Safety information _03Safety informationSAFETY INFORMATIONWARNING• Before operating the appliance, please read this manual thoroughly and retain it f
04_ Safety informationIMPORTANT SAFEGUARDSGENERAL• Read all instructions carefully. Before switching on, make sure that the voltage of your electrici
Safety information _05Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.• C
06_ Safety information• When the UV lamp is out of order, never disassemble or modify the product yourself.Please contact the manufacturer or service
Your vacuum cleaner _0701 YOUR VACUUM CLEANERYour vacuum cleanerHandleHandleHoseHoseCycloneCycloneCombination accessoryCombination accessoryPipePipe2
08_ Before using the vacuum cleanerASSEMBLYConnecting the HoseConnecting the handle and pipeConnecting the brushBefore using the vacuum cleaner
Before using the vacuum cleaner _0902 BEFORE USING THE VACUUM CLEANERUSING THE UV BRUSH (OPTION)Connecting the brush into the hose handleThere will be
Comments to this Manuals