Samsung SCC-3000 User Manual

Thank you for buying a Samsung SYSTEM CONTROLLER.This manual will guide you through using the SYSTEM CONTROLLER. Please read this manual carefullybefo

《10》Names and Functions of Each Part ※ Some DVR controller buttons may not be supported or may be used differently than as described in this manual,de

《11》Names and Functions of Each Part(6) Camera Controller① Joystick: Used for moving the camera up, down, left, and right, and for zoom control (see p

《12》Before Operation(1) Power-On① Power on the connected external devices before turning the controller on.② Press the power button at the back of the

《13》Before Operation(4) Joystick/Camera Control Button The joystick can be used to control the camera’s left and right (pan) and up and down (tilt) m

《14》Before Operation(5) Camera Movement Speed Control Use the joystick or press the Slow/Fast button at the bottom of thecamera control button sectio

《15》●The menu may be different depending on the PTZ camera model.●Press the ESC button to move to an upper setup mode.INFORMATIONPTZ Mode(1) PTZ Setup

《16》PTZ Mode(2) PRESET This menu is for setting the camera to move to preset locations.(2-1) PRESET Setup① At the [PTZ SETUP 1 ▶] menu, press the 1 b

《17》PTZ Mode(3) SWING This menu is for setting the camera to alternate between two assigned locations horizontally (pan) or vertically (tilt).Setting

《18》PTZ Mode(4) GROUP This menu is for setting repeated sequential surveillance of assigned locations with assigned speed and intervals.Setting the G

《19》PTZ Mode(5) TOUR This menu is for setting one or more Groups for Tour so that continuous Group operations can be carried out.The TOUR SETUP menu

《2》Contents●Important Safety Instructions 3●Major Functions and Features(1) Overview 5(2) Features 5●Product Components 5●System Overview 6●Names and

《20》PTZ ModeGROUP 1TOURGROUP 3

《21》PTZ Mode(6) MODEL This menu is for setting the PTZ camera ID and camera type.① At the [PTZ SETUP 1▶] menu, press the ▶▶ button (see p.15).② Press

《22》PTZ Mode(7) TRACE This menu is for inputting camera movements, through joystick or camera control buttons, into the memory for acertain period of

《23》PTZ Mode(8) AF (Auto-Focus) This menu is for adjusting camera focus manually or automatically aftercamera operation. If AF is set to OFF in the c

《24》PTZ Mode(9) OSD This is used for displaying the camera menu on the monitor.① At the initial screen, press the OSD button.② Use the controller but

《25》DVR ModeDVR MODEL Setup This menu is for setting the DVR ID and model for operation by acontroller. Sub-controllers cannot be used if the master

《26》Controller Mode(1) Controller Setup Mode Sub-controllers cannot be operated if the master controller is in setup mode.① At the initial screen, pr

《27》Controller Mode(2) Controller ID Setup This menu is for setting controller ID.① At the [Controller SETUP 1 ▶] menu, press the 1 button (see p.26)

《28》Controller Mode(4) DATA COPY This menu is for copying master controller menu data to a sub-controller.The controller ID value is not copied.① At

《29》Controller Mode(5) RESPONSE If the camera RESPONSE is set to two-way reception (RESPONSE ON), the controller RESPONSE menu must beset to ON. If t

《3》Important Safety Instructions All work related to the installation of this appliance must be performed by qualified service personnel or system ins

《30》Controller Mode▤ For information on camera RESPONSE settings (DIP switch settings), refer to the camera manual.(5-1) SPD-1600 DIP SetupON OFFDIP-S

《31》Controller Mode(6) PASSWORD This menu is for setting the password to enter when changing controller setup values upon power-on.(6-1) PASSWORD Set

《32》Controller Mode(6-2) Applying Password – Setup Mode① At the Password Setup screen, press the 2 button.② Press the 1 button to ask for a password e

《33》Controller Mode(7) PRIORITY This menu is for setting the connected sub-controller to use a PTZ camera or DVR within the specified restrictions.Th

《34》Controller Mode(8) DEFAULT This menu is for resetting the changed controller setup values to the default values.① At the [Controller SETUP 1 ▶] m

《35》REFERENCE(1) Swing, Group Movement Speed▤ For Swing setup, the speed setup value can be 240˚/second for pan, and 180˚/second for tilt.Setup value

《36》REFERENCEXX X X X XX X X X X X X X X X XX X X X X X X X X X X XRX+ RX-X XRX+ RX-X XRX+ RX-GRD TX+ TX-RX+ RX- TX+ TX- RX+ RX- TX+ TX- RX+ RX- TX+ T

《37》REFERENCE(3) RS-485/422 Pin Layout (D_SUB_FEMALE)Terminal Name1 +12V2 RX+ (RS-485+) PORT13 RX- (RS-485-) PORT14 TX- PORT15 TX+ PORT16 -7 RX+ (R

《38》REFERENCE(5) Controller SpecificationsMODEL SCC-3000Power (Consumption) 12VDC(Max 700mA)Control DVR & Speed Dome (SPD-2500, 1600, 2200)PTZ C

P/No.:6806-0586-01ASALES NETWORKSAMSUNG TECHWIN CO., LTD.145-3, Sangdaewon 1-Dong, Jungwon-Gu,Sungnam, Kyungki-Do, Korea 462-703TEL: +82-31-740-8137~8

《4》Important Safety Instructions If the controller body gets dirty, turn the power off and wipe the surface with a soft cloth.- Do not use chemical a

《5》Major Functions and Features(1) OverviewThis product is designed for use only with the Speed Dome camera, CCTV receiver, and Samsung Digital Video

《6》System Overview※ Please refer to page 39 for the detailed connection map of the JUNCTION Box, Controllers and external devices.(1) General Connecti

《7》Names and Functions of Each Part (1) Camera Setup Section① RESET : Resets camera power.② PRESET : Moves camera to the preset location (see p.16).③

《8》Names and Functions of Each Part (2) Number Pad※ 'F' in the table below refers to the Function button. ① 0 ~ 9 : Used for entering camera

《9》Names and Functions of Each Part (4) Universal Controller① ZOOM W/T : Performs camera zoom action (wide and telephoto).② FOCUS -/+ : Used for manua