Samsung DMT800 User Manual download pdf

Fast Track Troubleshooting

Models:

DMT800RHS/XAA

DMT800RHB/XAA

DMT800RHW/XAA

Publication # tsDMT800RF Revision Date 06/30/2011

IMPORTANT SAFETY NOTICE – “For Technicians Only” This service data sheet is

intended for use by persons having electrical, electronic, and mechanical experience

and knowledge at a level generally considered acceptable in the appliance repair trade.

Any attempt to repair a major appliance may result in personal injury and property

damage. The manufacturer or seller cannot be responsible, nor assume any liability for

injury or damage of any kind arising from the use of this data sheet.

Dishwasher Cycle Chart — Air diffusion condensing Dry System

Which Detergent Ingredients Give Best Dishwasher Performance

Detergent with a separate rinse additive in the dispenser gives better drying performance.

For tough baked on soils an Enzyme detergent is better at hydration of the food soils.

For staining such as tomato, coffee and tea, a detergent with Chlorine bleach will work on the stains much better than

an Enzyme based detergent. Now that phosphate content in dishwasher detergent has plummeted to 0.5 percent from

as high as 8.7 percent, conditioned (soft) water is even more critical

. The reduction of phosphates may cause spots and

film on dishes that can form when the minerals and food bits combine during the wash.

It is important to test water hardness for washability complaints.

Cycle Pre-

wash

Pre-

wash

Main wash Rinse

Rinse

Last Rinse

[Sanitize]

Dry

(min.)

Water

[gal(ℓ)]

Time

(min.)

Normal

●

Flex 120 ~ 138 ˚F

Flex

●

x 136 ˚F

[162 ˚F ]

30 3.6~6.7

(13.6~25.2)

110~132

Heavy

● ●

140 ˚F

● ● ●

158 ˚F [162 ˚F ] 40 8.1 (30.6) 152

Deli-

cate

●

x 122 ˚F

● ●

x 140 ˚F 30 4.7 (17.7) 107

Pot &

Pans

●

131˚

149 ˚F

● ● ●

158 ˚F [162 ˚F] 40 8.1 (30.6) 157

Quick

●

x 140 ˚F x

●

x 140 ˚F [162 ˚F] 15

(+15)

4.7 (17.7) 59

Smart

Auto

●

Flex 122 ~138 ˚F

Flex

●

x 136 ˚F [162 ˚F] 30 4.7~6.7

(17.7~25.2)

100~149

• The numbers in parentheses in the Last Rinse column represent the temperature when you select Sanitize.

• When you select the Smart Auto or Normal cycle, you can eliminate the Flex (flexible) steps depending on the soil level

• The wash time varies with the steps or options you add, and on the pressure and temperature of the supplied water.

• When you select Half Load or Storm Wash, the cycle sequence remains the same. (DMT800)

• If “Rinse Refill” lamp lights during a cycle, the dishwasher adds 30 more minutes to the Drying cycle automatically after

the Clean light illuminates.

SEE BULLETIN

The Dishwasher power button will not

operate unless the circuit breaker is cycled

off and on. This applies to models pro-

duced between June 2010 and December

2010, serial number range **Z6**~**ZC**).

SUPPORT INFORMATION

Training — Plus One

http://my.plus1solutions.net/clientPortals/samsung/

Help — GSPN http://service.samsungportal.com/

Samsung Product Support TV

http://support-us.samsung.com/spstv/howto.jsp

Customer information videos and chat programs

Programs for Fridges, Laundry, Ranges & D/W

1 2 3 4 5 6 7

Summary of Contents

Page 1 - Fast Track Troubleshooting

Fast Track Troubleshooting Models: DMT800RHS/XAA DMT800RHB/XAA DMT800RHW/XAA Publication # tsDMT800RF Revision Date 06/30/2011

Page 2 - Dispenser Wax Motor

Vent Wax Motor Dispenser Wax Motor

Page 3 - Main PCB

CN101 Power 1 Ground (Yel/Grn) 3 120vac N (Yel) 5 120vac L (Blk) CN302

Page 4 - Detergent Door Not Opening

Leaking Code Moisture creates resistance between the pins. ALWAYS clean the area below the pins after troubleshooting. Check Pump Ass’y for proper twi

Page 5 - Error Codes - DMT800 series

Code sym-bol Meaning Occurring condition Expected condition Temp sen-sor Error When 0.2V or below, or 4.5V or above is main-tained for over 3 secon

Page 6 - Symptoms Note

 Press the ‘Heavy’ + ‘Delicate’ + ‘Power’ buttons at the same time for two seconds to enter Service Inspection Mode.  All LEDs are displayed for t

Page 7

SVC inspection Mode- DMT800 series Mode Display Related Parts Symptoms Note No.9 S •Drain Pump •Water Level Sen-sor Drain Error Drain pump will