Samsung CS-29A200 User Manual

COLOURTELEVISION29A7/29A6/29A20034A7Owner’s InstructionsBefore operating the unit,please read this manual thoroughly,and retain it for future referenc

In order to watch television programmes broadcast via a satellitenetwork, you must connect a satellite receiver to the TV set.➢If you wish to connect

11If you wish to listen a programme or recording using DolbySurround, you can connect additional speakers.The four speaker terminals are located on th

The mains lead is attached to the rear of your television.1 Plug the mains lead into an appropriate socket.➢The main voltage is indicated on the rear

13The remote control is used mainly to:◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu systemThe following ta

When the television is initially powered ON, several basic customersettings proceed automatically and subsequently. The follwingsettings are available

15When you start using your television for the first time, you mustselect the language which will be used for displaying menus andindications.1 Press

You can scan for the frequency ranges available to you, (availabilitydepends on your area). 1 Press the MENU button.Result: The main menu is displayed

17The Sort operation allows you to change the programme numbersof stored channels. This operation may be necessary after usingAuto store feature. You

You can store up to 100 television channels, including thosereceived via cable networks.When storing channels manually, you can choose:◆ Whether or no

198 If you... Then move the joystick...Know the number of the ◆ up or down to select the channel to be stored Channel option◆ left or right to indica

2ENGSafety Instructions5¡10%HH35¡75%These illustrations represent precautions concerning your television.CautionDo NOT expose the television toextreme

1 Press the MENU button.Result: The main menu is displayed.2 Move the joystick up or down until the Channel is selected.Result:The options available i

21ENG◆ Activating the child lockYou can restrict viewing by locking the channels of yourchoice. For example, you can prevent your children fromwatchin

You will normally find that scan mode is best set to on to reduceany slight picture filcker. However, it is possible that someoccasional broadcasts ma

23If you find that the picture received is slightly tilted to one side, youcan adjust the tilt setting.1 Press the MENU button.Result: The options ava

If no signal is being received or the signal is very weak, a bluescreen automatically replaces the noisy picture background.If you wish to continue vi

25ENGYou can select the picture format which best corresponds to yourviewing requirements. The following picture formats are available(depending on th

26ENGChanging the Picture StandardYou can use your remote control to select the type of picture whichbest corresponds to your viewing requirements. Th

27ENGYou can adjust the volume using your remote control.To... hold down the...Increase the volume+button.Result: A horizontal bar is displayed and th

28ENGSelecting the Sound Mode (depending on the model)You can switch the sound off temporarily.Example: You wish to answer the telephone.1 Press the M

29ENGSelecting the Sound StandardYou can use your remote control to select the type of special soundeffect to be used when watching a given broadcast.

3Contents◆ FOREWORD Safety Instructions... 2 Caution ...

30ENGThe Dolby mode allows you enjoy Dolby prologic surround effectfully with only surround speakers are connected to TV.This allows various modes for

31The following Dolby settings can be adjusted to suit your personalpreferences. ◆ Volume of the centre and rear speakers◆ Prologic delay time for the

You can connect a set of headphones to your television if you wishto watch a television programme without disturbing the otherpeople in the room.Plug

33You can select a time period of between 15 and 180 minutes afterwhich the television automatically switches to Standby mode.1 Press the SLEEP button

34ENGPicture In Picture Feature (Option)You can display a “Picture-In-Picture screen” within the mainpicture of TV program or Video input. In this way

35Remote-control functions while “PIP” is “On”:Features DescriptionPIP ON Used to operate ON/OFF function of PIP directly.SWAP Used to interchange the

36ENGMost television channels provide a written information service viaTeletext. Information provided includes:◆ Television programme times◆ News bull

37ENGWhen you have displayed a Teletext page, you can select variousoptions to suit your requirements.To display... Press the...Both the Teletext info

You can enter the page number directly by pressing the numericbuttons on the remote control.1Enter the three-digit page number given in the contents,

39ENGConnecting to the AV 1, 2 or 3 Input/OutputsConnecting to the AV 4 Input (depending on the model)➀ This end can be fitted with:◆ Three RCA connec

4Contents (cont.)◆ USING YOUR TELEVISION (cont.) Adjusting the Volume...

40ENGConnecting to the S-Video Input (depending on the model)➢ The S-VIDEO/RCA (AUDIO-L+R) connectors are used for equipmentwith an S-Video output, su

41ENG➢ The AUDIO OUT RCA connectors are used for equipment, such as anaudio system (to take full advantage of the Surround sound effect).Rear of the T

42ENGConnecting to the PC Input (depending on the model)➢ The PC INPUT/RCA(AUDIO-L+R) connectors are used for interfacing with your PC.First, click on

43ENGOnce you have connected up your various audio and video systems,you can view the different sources by selecting the appropriate input.1 Check tha

-AFTER SALES SERVICE-Do not hesitate to contact your retailer or serviceagent if a change in the performance of your productindicates that a faulty co

5ENG➣Using the Buttons on the Front PanelIf the remote control no longer works or you have lost it, you can use controls on the frontpanel of the tele

6ENGREAR SPEAKER (16Ω)R LAUDIO OUTL R CCENTER SPEAKER (8Ω)75ΩRear of TVSide of TV(depending on the model)Connection Panel❶ SPEAKER CONNEC

7ENGInfrared Remote Control (depending on the model)PowerNEXT CHANNEL/TELETEXT NEXT PAGEAUTOMATIC SWITCH-OFFVCR FUNCTIONS;(STOP/REWIND/PLAY/PAUSE/FAST

To view television channels correctly, a signal must be received bythe set from one of the following sources:◆ An outdoor aerial◆ A cable television n

9You can connect a VCR to the television using a:◆ Coaxial cable◆ S-Video cable1 Plug the aerial input cable into the appropriate socket on the VCR.2