Samsung 275TPLUS User Manual

Install driverInstall programs SyncMaster 275TPLUS

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only(Applicable in the European Union and other European co

PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have an image retention when switching from one image to another especially after

Ex)The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it.I

Package ContentsPlease make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact

Quick Setup GuideWarranty Card (Not available in all locations)User's Guide, Monitor Driver, Natural Color, MagicTune™ Cable Power

Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.Adjust buttons [ ] These buttons allow

Select this mode to view a sharper image than in "Standard" mode. 2) Standard Select this mode when the surroundings are bright. This a

The configuration at the back of the monitor may vary from product to product. POWER S/W / POWER POWER S/W : Switch the monitor on and off.P

Kensington Lock z The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device

Connecting Cables Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into

Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read

The USB port of the monitor supports High-Speed Certified USB 2.0. High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1.5 MbpsPowe

Connecting a SpeakerWhen connecting a speaker, be careful that the grooves of the monitor and the speaker . ( )are aligned with each other. A

Connect a headphone to the black terminal at the right of the speaker. Connect a microphone to the red terminal at the right of the speaker.By tur

Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the PR, PB, Y input ports using a component video cable (PR, PB, Y). Then, start the DVD

Sliding stand Stand Stopper Swivel standUsing ( ),You can swivel the monitor left and right at an angle of 350° to set the monitor lengthwise. T

Using ( ), You can adjust the tilt anlgle within a range of 3° forward to 25° backward for the most comfortable viewing angle. Attaching a Ba

inside of the Monitor. zFor wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on

Monitor Driver When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is s

This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted

Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for yo

Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands.

Click "Have Disk…" and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK". S

Click "Display" icon and choose the "Settings" tab then click "Advanced." Click the "Properties" button

Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button

Monitor driver installation is completed. Microsoft® Windows® 2000 Operating System When you can see "Digital Signature Not Found"

In the Display Registration Information window, click the Settings tab and then click "All Display Modes".Select a mode that you wish to

Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural Color screen will appear. Click on Natural Color in the

z 32MB Memory above z60MB Hard disk space above * For more information, visit the MagicTune™ website. Uninstall The MagicTune™ program can b

Control Buttons Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. PC/DVI(PC) : MagicBright

This button allows you to adjust items in the menu. When OSD is not on the screen, push the button to adjust brightness. Press this button to activa

OSD Lock & Unlock When pressing the AUTO or PIP button after locking the OSD When pressing the MENU button after locking the OSDMenu Descript

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. T

Though the OSD adjustment lock function is activated, you can still adjust the brightness and contrast, and adjust MagicBright ( ) using the D

Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu DescriptionSOURCESelects the input

Changing the source is only allowed for external devices that are connected to the monitor at the time. PIP ( Available in PC/DVI(PC) Mode Only

The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected reso

The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolut

Custom- Not available in MagicBright™ mode of Dynamic CR. MENU → , → → , → → , → → , → 2) Brightness : Adjust the Brightness. Brightness

Picture (AV/S-Video/Component/HDMI) The default setting may different depending on the selected Input Mode (input signal source selected in Externa

MENU → , → → , → → , → → , →SizeYou can switch the Size. MENU → , → → , → → , → zAV / S-Video : Wide / 16:9 / Zoom1 / Zoom2

MENU → , → → → , → depending on your taste. If this is the case, adjust the Picture and Color menu by using the OSD to fit your eyes. Color

The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected reso

Otherwise, this may cause fire. Keep any heating devices away from the power cable. A melted coating may cause electric shock or fire. Do not ins

The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolut

Safety Screen - The Screen Scroll function scrolls the screen for the specified period of time. - This function is not available when the power is t

Check ListBefore calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistan

There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals?The monitor is in PowerSaver mode. Press a ke

Has the video card been set properly?Set the video card by referring to the video card manual. There is a message that reads "Unrecognized m

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How

monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system

SpecificationsGeneralModel Name SyncMaster 275TPLUSLCD PanelSize 27" Wide Diagonal (68 cm) Display area 581.76 mm(H) x 363.6 mm(V) Pixel Pitch 0

AC 100-240 VAC ( ± 10 %), 60/50 Hz ± 3 HzSignal Cable15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable (Sold separately)

Power Indicator Blue Blue Blinking BlackPower Consumption Less than 130 watts Less than 2 Watts Less than 0 Watts This monitor is EPA ENERGY STAR®

Cleaning and Using When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray

1024 VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1600 x 1200 75.000 60.000 162.000 +/+VESA, 1920 x 1200 74.038 59.950 154.000 +/- Horizontal F

Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North

EuropeAUSTRIA 0800-SAMSUNG(726-7864) www.samsung.com/atBELGIUM 0032 (0)2 201 24 18 http://www.samsung.com/be CZECH REPUBLIC 844 000 844 http://www.sam

UZBEKISTAN 8-800-120-0-400 http://www.samsung.uzAsia PacificAUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 800-810-5858, 010- 6475 1880 http:/

Interlace and Non-Interlace MethodsShowing the horizontal lines of the screen from the top to the bottom in order is called the Non-

If there's still noise after automatic adjustment, use FINE/COARSE adjustment function. If you view a fixed screen for an extended period of tim

If your monitor does not operate normally - in particular, if there is any unusual sound or smell coming from the monitor - contact an authorized dea

Keep the product away from combustible chemical sprays or inflammable substances. This may cause an explosion or fire. Never insert anything meta

When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devi