Samsung 911LT Setup Guide

Install drivers Install programs !! !!SyncMaster 711LT/ 911LTDownloaded from ManualMonitor.com Manuals

Be careful when adjusting the angle of the product or the height of the stand. This may result in personal injury as your hand or fingers may b

conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Downloaded from ManualMonitor.com M

Features Tuning the power off while booting up a Client may damage the monitor In addition, exit all running programs before turning the monit

Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local

MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. MagicBright™ button [] MagicBright™ is a n

mode -- Analog or Client input signal.) >> Click here to see an animation clip AUTO button Use this button for auto adjustment. >>

and turn it in the locking direction ( ).2. Connect the Kensington Lock cable. 3. Fix the Kensington Lock to a desk or a heavy stationary objec

Connecting CablesConnecting Cables (When used as a normal monitor)Connect the power cord for your monitor to the power port on the back of the m

USB (USB Connection Terminal) Connect USB devices such as a mouse, keyboard and external storage devices (DSC, MP3, external storage, etc.). LAN

You can easily adjust the position of the monitor screen from right to left using the rotating stand. Rubber stubs are attached at the bottom of the

Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read

mount the monitor at least 10cm away from the wall surface. zContact the nearest Samsung Service Center for more information. Samsung Electronics wil

Introduction Welcome Congratulations on purchasing one of the Samsung Linux-based Thin Client models. The Samsung Thin Clients are composed

PXE Network Boot Support Yes Yes SSH Yes Yes DHCP Yes Yes DPMS Yes Yes Screen Saver Yes Yes USB Mass Storage Yes Yes File Browser EmelFM2 EmelFM2

Control Center (Global Settings) Starting the Control Center Once the STC boots up, you have the option to set the STC as per your choice

Resolution It can be set to any one of the following screen size. z800 x 600 z 1024 x 768 z1280 x 1024 Color It can be set to any one of the fo

Keyboard Type Choose your keyboard type from the available options from the drop box.Character Repeat In this section you can set the auto repeat

zSession Name: - Enter the name for the session to be saved or loaded. zLoad / Save / Delete: - For loading, saving or deleting a saved session from

It is possible to select/create a new/existing mount point using the Control Centre dialog boxes itself. The process is described here along with fi

ICA Global Settings Citrix® Independent Computing Architecture (ICA)® allows users to connect remotely to servers running Citrix MetaFrame. ICA Client

accessible on the network and using the chosen browsing protocol. TCP/IP If your network configuration uses routers or gateways, or to eliminate add

Otherwise, this may result in electric shock or fire. Do not touch the power plug with wet hands when removing or plugging the plug into the outlet.

and over again. Set the maximum size of local system memory (in kilobytes) to be used for caching and the minimum size of bitmaps to be cached and th

You can perform bi-directional mapping between serial devices that are attached to the Thin Client (e.g. scanners, serial printers) and the Citrix Se

PNAgent This “PNAgent” (Program Neighborhood Agent) page allows you to configure and search for published applications by Metaframe servers. Server

This page allows you to configure how you want to connect to your Metaframe servers. However options are self explanatory. Session Options:The page

This menu allows time settings for the STC to be configured. The available options to be set are Date This menu section allows you to configur

Apart from these options, there also is a Factory Reset option available that is used to reverse any unnecessary changes being made by the user k

password has to be provided.Upgrade Using NFS The firmware file is present in the location specified by the NFS share address. No username or passwor

zAutomatic Logon : Select if you want to logon automatically. {User Name: User Name to be used for connection. { Password: Password to be used for c

zScreen Size: - Size of the window when connection is established. zColor Depth: - Color depth to be used while connecting to the server. Input &q

Xterm Xterm is the terminal used in STC wherein we can execute local commands using a shell. It is the basic busybox shell that is used in the Xte

Installation Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures,

fdisk Used for getting or altering partition table information free Displays the amount of free and used system memory halt To halt/shutdown th

command prompt using the commands "shutdown" or "reboot", or using the shutdown interface as shown below. This interface is access

Monitor Driver When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is s

This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted

Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for yo

Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". Click "Close"

Click "Display" icon and choose the "Settings" tab then click "Advanced." Click the "Properties" button

list and click the "Next" button. If you can see following "Message" window, then click the "Continue Anyway" butt

How to install Click "Start," "Setting," and then "Control Panel." Double click the "Display" icon. Sel

Natural Color Natural ColorOne of the recent problems in using a computer is that the color of the images printed out by a printer or other imag

Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the front of the product on the floor. Otherwise, this ma

MagicTune™ execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installatio

Control Buttons [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. [ ] These buttons allow you to adjust item

Menu DescriptionAUTO When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center

In case of pushing MENU button after locking OSDMenu DescriptionOSD Lock & UnlockThis is the function that locks the OSD in order to keep th

MagicBright™Push the MagicBright™ button to circle through available preconfigured modes. - Six different modes (Custom/Text/Internet/Game/

OSD Function Picture Brightness Contrast Color MagicColor Color Tone Color Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD

Menu Description Play/StopMagicColorMagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display nat

Color Tone( Not available in MagicColor mode of Full and Intelligent. ) MENU → , → → , → → , → MENUColor ControlAdjusts individual Red,

H-PositionChanges the horizontal position of the monitor's entire display. MENU → , → → , → → , → MENUAvailable in analog Mode On

Display Timeturned off. - 5 Sec, 10 Sec, 20 Sec, 200 Sec MENU → , → → , → → , → MENUSetup Menu Description Play/StopImage Reset Imag

cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10. When cleaning the power plug pins or dusting the power outlet, clea

Menu DescriptionInformationShows a video source, display mode on the OSD screen. MENU → , Downloaded from ManualMonitor.com Manuals

Check ListBefore calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistanc

the monitor and restore the image on the screen. I cannot see the On Screen Display.Have you locked the On Screen Display (OSD) Menu to prevent change

Sound level is too low. Check the volume level. If the volume is still too low after turning the control to its maximum, check the volume contro

digital device such as a digital camera, camcorder or USB memory to the USB port, but they do not work.an additional driver installation. Check i

monitor with a soft cloth, using either a cleaning solution or plain water. Do not leave any remains of the detergent nor scratch the case. Do not a

Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. Judging the

SpecificationsGeneralModel Name SyncMaster 711LTLCD PanelSize 17 inch (43 cm )Display area 337.92 mm (H) x 270.336 mm (V)Pixel Pitch 0.264 mm (H) x 0

AC 100 - 240 V ~ (+/- 10 %), 50/60 HzSignal Cable15pin to 15pin D-sub cable, DetachableDimensions (W x H x D) / Weight 370.0 x 342.3 x 69 mm

5~7 P4 3.0 GHz 1 Gbyte100 MbpsServer 8~10 P4 3.2 GHz 2 GbyteThe content presented above is the result of testing a specific server. The information m

Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. Otherwise, this may result in electric shock or fire

VESA, 800 x 600 35.156 56.250 36.000 +/+VESA, 800 x 600 37.879 60.317 40.000 +/+VESA, 800 x 600 48.077 72.188 50.000 +/+VESA, 800 x 600 46.875 75.00

SpecificationsGeneralModel Name SyncMaster 911LTLCD PanelSize 19 inch(48 cm)Display area 376.32 mm(H) x 301.056 mm(V)Pixel Pitch 0.294(H) x 0.294(V)S

AC 100 - 240 V ~ (+/- 10 %), 50/60 HzSignal Cable15pin-to-15pin D-sub cable, DetachableDimensions (W x H x D) / Weight 416.6 X 375.2 X 74.7

5~7 P4 3.0 GHz 1 Gbyte100 MbpsServer 8~10 P4 3.2 GHz 2 GbyteThe content presented above is the result of testing a specific server. The information m

VESA, 640 x 480 37.500 75.000 31.500 -/-VESA, 800 x 600 35.156 56.250 36.000 +/+VESA, 800 x 600 37.879 60.317 40.000 +/+VESA, 800 x 600 48.077 72.18

Contact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North

TRINIDAD & TOBAGO1-800-SAMSUNG(726-7864) http://www.samsung.com/latin VENEZUELA 0-800-100-5303 http://www.samsung.com/latin EuropeAUSTRIA 0800-SAM

UKRAINE 8-800-502-0000 http://www.samsung.com UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.uzAsia PacificAUSTRALIA 1300 362 603 http://www.samsu

Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines an

PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have an image retention when switching from one image to another especially after

If water or foreign material enters the product, disconnect the power cord and contact a Service Center. Otherwise, this may result in electric shock

The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it.Imag

If you do not use the product for a long period of time, disconnect the power cord from the power outlet. Otherwise, this may result in overheating