Samsung DW60M9970BB/EU User Manual

DishwasherInstallation manualDW60M9970**/DW60M9550**/DW60M9530**DW9000M_DD68-00193B-03_EN.indd 1 2018-04-25  4:42:28

InstallationInstallationEnglish10 STEP 2 To replace the rear footIf the distance between the oor and the bottom of the worktop is more than 860 mm, r

InstallationEnglish 11 4. Find the sub foot in the installation kit. Insert the sub foot into the hole of the rear foot’s place, and then turn the s

InstallationInstallationEnglish12 STEP 4 Arrange the hoses1. Clean the bottom of the countertop.2. Attach the protective sticker as shown. 3. Arran

InstallationEnglish 13 STEP 5 Level the dishwasherFor FBI (Fully Built-In) models, go to STEP 6 and install the custom panel rst. Then, return to th

InstallationInstallationEnglish14 STEP 6 Install the custom panel (SBI/FBI models only)SBI (Semi Built-In, DW60M9***S*) modelsA1. Insert the supplied

InstallationEnglish 15 SBI (Semi Built-In, DW60M9***S*) modelsABmax. 115max. 7205943. Fully insert the dishwasher under the countertop.4. Align the

InstallationInstallationEnglish16 SBI (Semi Built-In, DW60M9***S*) modelsBA6. Put the installation template on the back of the custom panel.• For A:

InstallationEnglish 17 SBI (Semi Built-In, DW60M9***S*) models1 spacer2 spacers3 spacers4 spacers7 spacers6 spacers5 spacers5-9 mm10-14 mm25-29 mm30-

InstallationInstallationEnglish18 SBI (Semi Built-In, DW60M9***S*) modelsB12. While holding the custom panel, attach it to the door and insert the cus

InstallationEnglish 19 SBI (Semi Built-In, DW60M9***S*) models15. Secure the custom panel to the door by fastening the 4 screws (Ø4 X 43).1234530˚16.

ContentsEnglish2 ContentsWhat’s included 3Installation kit (provided) 3Installation kit (not provided) 5Tools required (not provided) 5Installatio

InstallationInstallationEnglish20 FBI (Fully Built-In) modelsA1. Insert the supplied rubber skirt (A) into the 3 holes at the bottom of the door. (a

InstallationEnglish 21 FBI (Fully Built-In) modelsBA30 mm5. While holding the custom panel, attach it to the door and insert the custom panel xers

InstallationInstallationEnglish22 FBI (Fully Built-In) models9. Open the dishwasher door and remove the 2 screws.CAUTIONUse caution when opening the

InstallationEnglish 23 STEP 7 Secure the dishwasherYou can use the brackets to secure the dishwasher to the countertop. Alternatively, you can drill

InstallationInstallationEnglish24 To the sides1. Use a at-head screwdriver to remove the middle and bottom caps from both sides of the dishwasher.CA

InstallationEnglish 25 STEP 8 Connect the drain hose1. Detach the hose holder from the dishwasher, and then cut off the protruding part from the hol

InstallationInstallationEnglish26 STEP 9 Final check1. Remove all foam, paper packaging, and unnecessary parts from inside the dishwasher.2. Turn th

InstallationEnglish 27 Skirting boardYou can attach the skirting board according to the model or installation conditions.Pre-cut skirting board (DW60

InstallationInstallationEnglish28 Skirting board1. Put the skirting board on the bottom of the dishwasher. 2. Open the door of the dishwasher, and d

InstallationEnglish 29 Kick plate (applicable models only)If you want to install the kick plate, follow these steps.1. Put the lower felt behind the

InstallationEnglish 3 InstallationWhat’s includedMake sure all the parts are included in the product package. If you have a question about the dishwa

InstallationInstallationEnglish30 3. Attach the kick plate to the dishwasher using the kick plate brackets. Make sure the kick plate brackets are in

MemoEnglish 31 DW9000M_DD68-00193B-03_EN.indd 31 2018-04-25  4:42:35

DD68-00193B-03DW9000M_DD68-00193B-03_EN.indd 32 2018-04-25  4:42:35

InstallationInstallationEnglish4 SBI (Semi Built-In, DW60M9***S*)Top brackets (2 ea) Ø4 X 12 screws (8 ea)Protective sticker Sub footCustom panel xer

InstallationEnglish 5 Installation kit (not provided)Hose clampTools required (not provided)Safety glasses Gloves Flashlight Wrench (22 mm) for the f

InstallationInstallationEnglish6 Installation requirementsTo prevent a risk of re, electric shock, or personal injury, all wiring and grounding must

InstallationEnglish 7 DrainIf you are using a drain system dedicated to the dishwasher, connect the drain hose to a drain system that is between 30 c

InstallationInstallationEnglish8 Step-by-step installationThe installation procedure may differ depending on the model.STEP 1 Select a locationABSelec

InstallationEnglish 9 Cabinet dimensionsMax. 720594575600598575817-875 mm820-890 mm5310050NOTECheck if the distance between the oor and the bottom o