Samsung BD-H4500 User Manual download pdf (Page 8)

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of

the product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the

other connections.

- When you change the connections, turn off all devices before you start.

Audio

Video

✎

NOTES

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your

TV.

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first

time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the

screen.

Connecting to an Audio System

You can connect the Blu-ray player to an audio system using illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the

other connections.

- When you change the connections, turn off all devices before you start.

Connecting to an HDMI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back

of the product to the HDMI IN jack on your receiver.

• Best quality (Recommended)

Audio

BD_H4500_ZC-ENG-01 VE.indd 8 10/29/14 4:02 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

No comments

Samsung BD-H4500 User Manual Page 8