Samsung BD-J5900 User Manual download pdf (Page 10)

Wireless Network

Wireless Router

Broadband service

NOTES

✎

If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless

network.

Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.

The player supports only the following wireless security key protocols:

WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is

currently being used by another device nearby, it will result in interference and communication failure.

If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router to WEP,

TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with new Wi-Fi certification

specifications.

Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance,

distance, obstacles, interference by other radio devices, etc).

Settings

The Setup Procedure

The Home screen will not appear if you do not •

configure the setup.

The OSD (On Screen Display) may change in this •

player after you upgrade the software version.

The access steps may differ depending on the •

menu you selected.

After the setup process is complete, you can •

then operate the panel buttons and remote

control.

After you have connected the player to your

TV, turn on the TV and player. When you

turn on the player the first time, the player's

Setup screen appears on the TV. The Setup

procedure lets you set the On Screen Display

(OSD) and menu languages, the aspect ratio

(screen size), the network type, and connect

the player to your network.

NOTES

✎

The Home menu will not appear if you do not

configure the setup except as noted below.

If you press the

BLUE (D) button during

network setup, you can access the Home menu

even if the network setup is not completed yet.

When you return to the Home menu, the full

screen mode is cancelled automatically.

If you want to display the Initial Setting screen

again to make changes, press the

button on

the front panel of the player for more than 5

seconds with no disc inserted. This resets the

player to its default settings.

After the setup process is complete. you can

operate the HDMI-CEC function.

If you want to use the Anynet+(HDMI-CEC)

function to aid in the initial set up process,

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-

CEC) compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in

both the TV and the player.

3) Set the TV to the Setup Procedure.

If you leave the player in the stop mode for

more than 5 minutes without using it, a screen

saver will appear on your TV. If the player is

left in the screen saver mode for more than 25

minutes, the power will automatically turn off.

Menu Navigation

SCREEN

A-BVIEW

FULLBONUSREPEATREPEAT

AUDIOHOMESUBTITLE

HOME Button : Press to move to the Home

menu.

RETURN Button :

Return to the previous menu.

(Enter) / DIRECTION Button :

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

EXIT Button : Press to exit the current menu.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comments to this Manuals

No comments

Samsung BD-J5900 User Manual Page 10

Comments to this Manuals

Related products and manuals for Blu-Ray players Samsung BD-J5900