Samsung HT-C9950W User Manual download pdf (Page 33)

32 English

English 33

02 Connections

Wireless Network

You can connect to the network with a Wireless IP sharer.

A wireless AP/IP router is required to make a wireless network connection. Connect the wireless

LAN adapter to the Wireless LAN Adapter on the rear panel of the product.

- This unit is compatible with the supplied Wireless LAN Adapter.

Set the network options. (See page 45)

NOTE

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the

wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance, obstacle,

interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

Authentication Mode : WEP, WPAPSK, WPA2PSK

Encryption Type : WEP, AES

For the AllShare function, a PC must be connected in the network as shown in the gure.

✎

Wireless IP sharer

Wireless LAN Adapter

Networking with PC for

AllShare function

(See pages 66~67)

Broadband

service

HT-C9950W_NO-EUR-ENG(XME).indd 33 2010-09-20 오후 4:13:13

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 73 74

No comments

Samsung HT-C9950W User Manual Page 33