Samsung HT-E6730W User Manual download pdf (Page 33)

English 33

04 Settings



Wired - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

After following Steps 1 to 3 above:

1 . Select Start in the Network Settings screen,

and then press the

button. The Network

Status screen appears. The product attempts

to verify the network connection and fails.

Network Settings

Wired network connection failed.

MAC Address XX:XX:XX:XX:XX:XX

IP Address 0.0.0.0

Subnet Mask 0.0.0.0

Gateway 0.0.0.0

DNS Server 0.0.0.0

Unable to connect to the network. Try the following:

check if your IP address is set correctly in IP Settings.

Contact your Internet Service Provider for more information.

Retry

IP Settings

2 . Select IP Settings on the right of the screen,

and then press

button.

The IP Settings screen appears.

3 . Select the IP Mode field, and then set it to

Manual.

4 . Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►

buttons on the remote to move from entry

field to entry field.

NOTE



You can get these values from your Internet provider. You

can also view these values on most Windows computers.

For instructions, see "Getting the Network Settings

Values." on this page.

5 . When done, highlight OK, and then press

button. The product verifies the network

connection and then connects to the

network.

< Getting the Network Settings Values >

You can view your Network Settings values on

most Windows computers. To view the Network

Settings values, follow these steps:

• In Windows XP

1 . Right click the Network icon on the bottom

right of the Windows desktop.

2 . In the pop-up menu, click Status.

3 . On the dialog that appears, click the Support

tab.

4 . On the Support tab, click the Details button.

5 . The Network settings are displayed.

• In Windows 7

1 . Click the Network icon on the bottom right of

the Windows desktop.

2 . In the pop-up menu, click Network and

Sharing Center.

3 . On the dialog that appears, click the Local

Area Connection or Wireless Network

Connection depending on your network

connection.

4 . On the Support tab, click the Details button.

The Network settings are displayed.

NOTE



Depending on your Windows version, the information may

differ.

Wireless Network

You can setup a wireless network connection in

three ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

When you configure the wireless network

connection, any wireless network devices currently

connected through the product or, if applicable,

the product's current wired connection, will be

disconnected.

HT-E6730W_ZA_0314.indd 33HT-E6730W_ZA_0314.indd 33 2012-03-14 오후 3:44:502012-03-14 오후 3:44:50

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 68 69

Comments to this Manuals

No comments

Samsung HT-E6730W User Manual Page 33

Comments to this Manuals

Related products and manuals for Blu-Ray players Samsung HT-E6730W