Samsung HT-J5530K User Manual download pdf (Page 20)

20 - English

Settings

Network Settings

MAC Address XX:XX:XX:XX:XX:XX

IP Address 0. 0. 0. 0

Subnet Mask 0. 0. 0. 0

Gateway 0. 0. 0. 0

DNS Server 0. 0. 0. 0

a Previous d Skip < Move " Select

Unable to connect to the network. Try the following: check if your IP address is set

correctly in IP Settings. Contact your Internet Service Provider for more information.

Wired network connection failed.

Change Network

IP Settings Retry Close

2. Use the ◄► buttons to select IP Settings,

and then press the

button. The IP Settings

screen appears.

3. Select the IP Setting field, and then set it to

Enter manually.

4. Select a parameter to enter (IP Address, for

example), and then press

. Use the number

keypad on your remote control to enter the

numbers for the parameter. You can also enter

numbers using the ▲▼ buttons. Use the ◄►

buttons on the remote control to move from

entry field to entry field within a parameter. When

done with one parameter, press the

button.

5. Press the ▲ or ▼ button to move to another

parameter, and then enter the numbers for that

parameter following the instructions in Step 4.

6. Repeat Steps 4 and 5 until you have filled in all

parameters.

✎

You can get the network parameter values from

your Internet provider.

7. When finished entering all the parameter values,

select Return (

), and then press the

button. The home theater verifies the network

connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three

ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

Before you configure the wireless network

connection, disconnect any wireless network devices

currently connected to the product or, if applicable,

the product's current wired connection.



Wireless - Automatic

Follow the Steps 1 to 3 in "Configuring Your Network

Connection". (See page 19)

1. In the Network Settings screen, change

Network Type to Wireless. The product

searches for and then displays a list of the

available networks.

㾎

Network Settings

Select your network type.

Network Type Wireless

Wireless network

m Move " Select ' Return

You can connect your BD

Home Theater to the

internet. Please select which

wireless network to use.

WPS(PBC) Search

si-ap

MIC

KIMING_VTOWER

2. Select the desired network, and then press the

button.

3. On the Security Key screen, enter your

network's security code or pass phrase.

Enter numbers directly using the number buttons

on your remote control. Enter letters by selecting

a letter with ▲▼◄► buttons, and then pressing

button.

4. When finished, select Done, and then press the

button. The product verifies the network

connection and then connects to the network.

✎

You should be able to find the security code or

pass phrase on one of the set up screens you

used to set up your router or modem.



Wireless - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

Follow the Steps 1 to 3 in "Configuring Your Network

Connection". (See page 19)

1. In the Network Settings screen, change

Network Type to Wireless. The product

searches for and then displays a list of the

available networks.

2. Scroll through the list, select the desired network

or Add Network, and then press the

button.

3. If you selected a network in Step 2, go to Step 6.

If you selected Add Network, go to Step 4.

HT-J5530K-ZP-0327.indd 20HT-J5530K-ZP-0327.indd 20 2015-03-27  9:37:132015-03-27  9:37:13

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 96 97

Comments to this Manuals

No comments

Samsung HT-J5530K User Manual Page 20

Comments to this Manuals

Related products and manuals for Blu-Ray players Samsung HT-J5530K