Samsung HT-J5530K User Manual download pdf (Page 10)

10 - English

Connections

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and connect

it to the Stand.

2. Use the driver to fasten the screws (5x20) on

the 4 marked holes.

3. Straighten the provided speaker cable and run

it through the centre hole of the Stand Base.

Pull the cable out from the hole of the stand

pole.

4. Connect the upper Speaker to the assembled

Stand.

5. Insert a screw (5x15) and fasten it lockwise

through the hole on the rear of the speaker

using a screwdriver.

6. Arrange the speaker cable along the groove on

the rear side of the stand pole.

7. Connect the arranged speaker cables to the

port on the speaker’s rear side while matching

their colours.

8. This is the appearance after the speaker is

installed.

Follow this steps to install other speaker.

Speaker Cable Connections

1. Match each speaker cable bundle to the correct speaker by matching the coloured band on each bundle

to the coloured sticker on the bottom or back of each speaker.

2. Connect the speaker wire plugs from each speaker to the back of the product by matching the coloured

band on each cable to the colours of the speaker jacks. When connecting, make sure to match label

colour on the back of speaker.

Stand Base

Stand

Speaker

Stand

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 101 102

No comments

Samsung HT-J5530K User Manual Page 10