Samsung SUB-2000 User's Guide download pdf (Page 6)

COLOR CCD CAMERA User Guide

Overview

Rear View

Bottom View

Tripod Mounting Bracket Screw Hole

Used to fix the camera on a bracket or tripod.

The screw sizes for this hole are as follows:

1/4"-20UNC(20THREAD)

L:4.5mm±0.2mm(ISOstandard),

or0.197"(ASAstandard)

You can separate the Tripod Mounting Bracket and install it on the

top or bottom of the camera. Make sure to use the Tripod Mounting

Bracket when fixing the camera to a bracket or tripod. Otherwise

the camera may not be secure, or the internal circuitry of the

camera may be damaged.

Overview

Power Video Output UTP Port

This port accepts power for the camera (AC 24V or AC 28V), outputs video, and

facilitates RS-485 communication.

Power LED

This lamp is lit when the camera is receiving power normally.

❿

Power Input Terminal Block

If the UTP cable cannot be connected for power supply (distance over 300m(1000ft),

for example), this cable is used instead for connecting DC 12V / AC 24V power to the

camera using a separate adapter near by .

⓫

Video output terminal

Sends video signal and connects to the video input terminal of the monitor.

Function Setup switch

Display the menu on the screen and move the cursor in four directions to confirm

status or after changing a selected item.

❿

⓫

The lens is not supplied with this camera. Purchase a lens suitable for your environment.

This camera accepts the auto iris lens and both C-and CS-mount lens.

•TousethefunctionsofthiscameraeffectivelyitisrecommendedthataDCtypeAutoIris

lens is used.

•Keepthelenssurfaceclean,ifitbecomescontaminated with dirt or fingerprints the

picture quality suffers.

Notes

Installation

LENS

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Comments to this Manuals

No comments

Samsung SUB-2000 User's Guide Page 6

Comments to this Manuals

Related products and manuals for Bridge cameras Samsung SUB-2000