Samsung HMX-R10BP User Manual download pdf (Page 27)

Charging the battery pack with the AC power adaptor

• The battery pack is not charged during the power saving mode, which may keep the

mode indicator on or ﬂashing. Start charging the battery after turning off the camcorder

by pressing the power ( ) button.

• Even with the power is switched off, battery pack will still discharge if the battery pack is

left inserted in the camcorder.

• It is recommended you to have one or more additional battery packs to allow continuous

use of your camcorder.

PRECHECK!

Before starting the following procedure, make sure that the battery pack is inserted in your camcorder.

1. Press the power( ) button to turn off the camcorder and then close the LCD

screen.



page 31

2. Connect the power cord to the AC Adaptor and the wall outlet.

3. Connect the AC Adaptor to the DC IN jack on the camcorder.

• The CHG(charge) lamp lights up and charging starts. After the battery is fully

charged, the charging(CHG) lamp turns green.

Power cord

AC adaptor

Power( ) button

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 153 154

No comments

Samsung HMX-R10BP User Manual Page 27