Samsung SMX-C10GP User Manual download pdf (Page 56)

RECORDING WITH EASE FOR BEGINNERS (EASY q MODE)

With the EASY Q function, most of the camcorder settings are automatically adjusted,

which frees you from detailed adjustments.

1. Open the LCD screen and press the Power ( ) button to turn on the camcorder.

2. Press the EASY Q button.

When you press the EASY Q button, most functions turn off and the following

functions are set to "Auto." (Focus, iSCENE, etc. )

The EASY Q and Anti-Shake(HDIS) ( ) indicator appear on the screen at

the same time.

3. To record videos, press the Recording start/stop button.

To take photo images, press the PHOTO ( ) button. (SMX-C13/C14 only)

Recording will begin using the basic automatic settings.

To cancell EASY q mode

Press the EASY Q button again.

The EASY Q and Anti-Shake (HDIS) ( ) indicators disappear from the screen.

Most settings will return to the settings that were set prior to activating the EASY Q mode.

Unavailable buttons during EASY q operation

The following button and menu operations are unavailable because the items are automatically set.

And the corresponding message "Release the EASY Q" may appear if unavailable operations are attempted.

- MENU button / OK button

Cancel the EASY Q function if you want to add any effect or settings to the images.

EASY Q mode settings are released when the camcorder is turned off.

EASY Q mode automatically sets the "Anti-Shake(HDIS)" to "On" while using EASY Q.

•

recording

Before recording an important video, make sure to test the recording function to check if there is any problem with the audio

and video recording.

Do not operate the Power ( ) button or remove the memory card while accessing the storage media.

Doing so may damage the storage media or the data on the storage media.

This camcorder provides one combined video and photo record mode.

You can easily record videos or photos in the same mode without having to change it. (SMX-C13/C14 only)

You cannot use a locked memory card for recording. You will see a message saying recording is disabled due to the lock

You can switch the play mode to the record mode by pressing the Recording start/stop or Mode ( ) button.

If the power cable/battery is disconnected or recording is disabled during recording, the system is switched to the data

recovery mode. While data is being recovered, no other function is enabled. After data recovery, the system will be switched

to the STBY mode. When the recording time is short, the data recovery might fail.

•

46_English

0:00:00 [245Min]

STBY

~GGGG{

{

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 138 139

No comments

Samsung SMX-C10GP User Manual Page 56