16
Please insert the paper to the slip printer and press the “ CLEAR” key.
PROGRAMMING NOTE
This ECR ( Electronic Cash Register ) ‘s programming is easy.
In this manual, the programming steps are explained with flow chart boxes.
Each box represents a key on the keyboard.
The flow chart shows each key stroke you need to complete the programming.
Enter the keys in the flow chart from left to right.
DEFAULT PROGRAM : This machine arrives with a default or “ generic” program already installed.
Program options are set to 0(zero), unless otherwise noted, which means
the machine is operational right out-of-the-box.
1 SERVICE MODE PROGRAMMING
Service mode programming is the initial programming that is required when the register is new “out-of-the-
box”.
Service mode programming is also used to return the register to this condition.
1.1 RAM CLEARING
1.1.1 INITIAL CLEAR
Keyboard lock-ups and constant error conditions may be cleared by the following procedure.
This procedure will not effect register programming, or clear previously stored totals in RAM memory.
( 1 ) Turn the keylock to the ‘ P’ position and press the “ SUBTL” key.
( 2 ) While holding the “ SUBTL” key down, power the register off, and back on.
Continue to hold the “ SUBTL” key down until the receipt printer stops printing and the
display shows 0.00.
Comments to this Manuals