How to connect a COAXIAL TYPE antenna.
Connect an antenna to the
◆
FM antenna terminal.
Plug the connector on the
◆
FM antenna supplied into the coaxial socket
marked FM on the rear of the system.
Follow the instructions given on
◆
Page 14 to tune into a radio station, and
determine the best position for the antenna.
Connecting the FM Antenna
Your system is equipped with a clock which allows you to turn it on and
off automatically.
You should set the clock:
When you first purchase the mini-compact system
◆
After a power failure
◆
After unplugging the unit
◆
For each step, you have a few seconds to set the required
☛
options.
If you exceed this time, you must start again.
Switch the system on by pressing the
1
POWER ( ) button.
Press the
2
TIMER/CLOCK button twice.
Result: CLOCK is displayed.
Press the
3
ENTER ( ) button.
Result: The hour flashes.
To..
4
Press the TUNING/ALBUM button
Increase the hours .......................
Decrease the hours .....................
When the correct hour is displayed, press
5
the ENTER ( ) button.
Result: The minutes flash.
To..
6
Press the TUNING/ALBUM button
Increase the minutes
Decrease the minutes
When the correct time is displayed, press
7
the ENTER ( ) button.
Result: The clock starts and is displayed.
You can display the time, even when you are using another function,
◆
by pressing TIMER/CLOCK once.
You can also use
◆
, buttons on the main unit to instead of
TUNING/ALBUM button
or in step 4, 6.
For more information of the TIMER function, please refer to the page
◆
16.
Setting the Clock
FM Antenna (supplied)
75Ω COAXIAL CABLE (not supplied)
If reception is poor, you may need to install an outdoor antenna.
◆
To do so, connect an outdoor FM antenna to the FM socket on the rear of the
system using a 75Ω coaxial cable (not supplied).
Comments to this Manuals