Important:
• TousethisfunctionwithWindowsXP,
the attached Virtual Audio driver must be
installed.
• TousethisfunctionwithMac OS X,
attached Soundflower must be installed.
• About
Displays the version information of the LAN
Display System.
• Exit
Exits the LAN Display System.
Important:
• Theitemsmarkedwith“*”arenotavailablefor
Mac OS X.
• When“AdvancedScreenCapture”isenabled,
the computer mouse cursor may blink.
Ending the LAN Display projection
5. Click the Exit button on the main user interface or
the menu window to exit the LAN Display System.
6. In case of the wireless LAN communication, unplug
the USB wireless LAN adapter from the projector.
Before unplugging, be sure to press the UNPLUG
button on the remote control and select [Yes] on
the screen by pressing the or button and then
ENTER button.
Important:
• DonotswitchtheinputsourcetoUSBDisplay
or PC Less Presentation during the wireless LAN
communication. If switched, the communication
will be disconnected.
• DuringwirelessLANcommunication,theprojector
cannot communicate with the access point.
• Onlyinfrastructuremodeisavailabletowireless
LAN communication. Adhoc mode is not available.
Installing the virtual display driver
To project a virtual extended screen, install the Virtual
display driver as follows.
1. Double-click “Virtual display driver.exe” contained
in “C:\Program Files\LAN Display System”, and
start up the installer of the Virtual display driver.
2. The Setup window is displayed. Click [Next]
and operate according to the instructions on the
window.
3. When the installation has been completed, restart
the computer.
Installing the Virtual Audio driver
To use “Send Audio to Display” with Windows XP,
install the Virtual display driver as follows. Before
starting installation, be sure to read “ReadMe.txt”
contained in the CD-ROM.
1. Copy “Virtual Audio driver.exe” contained in the
TOOLS folder of CD-ROM to the hard disk of your
computer.
2. Double-click “Virtual Audio driver.exe” on the hard
disk, and start up the installer of the Virtual Audio
driver.
3. Follow the on-screen instructions to install the
software.
Installing Soundflower
To use “Send Audio to Display” with Mac OS X, install
Soundflower as follows.
1. Copy “Soundflower.pkg” contained in the TOOLS
folder of CD-ROM to the hard disk of your
computer.
2. Double-click “Soundflower.pkg” on the hard disk,
and start up the installer of Soundflower.
3. Follow the on-screen instructions to install the
software.
Using remote desktop
Connect an USB device such as a mouse or keyboard
to the USB-A terminal on the projector. While the
computer images are projected with the LAN Display,
the computer can be operated with the device.
To USB-A
terminal
Important:
• The USB-A terminal on this projector is compatible
with USB 2.0.
• SupportedUSBdeviceisstandardUSBHIDdevice
with power consumption less than 5V/500mA.
• Whenusingakeyboardandmousetogether,we
recommend a commercially available wireless
keyboard and wireless mouse intended for a
computer with wireless receiver.
• WhenusingaUSBhub,youarerecommendedto
use the one with external power supply.
• SomeUSBhubscannotbeuseddependingonthe
specifications.
Advanced display utilities (continued)
Comments to this Manuals