Samsung SPD-400 User Manual download pdf (Page 38)

setup screen

38_ setup screen



OSD position : Selects the position of the on-screen display menu.

If you change the number of OSD positions it will be moved to set number based

on the entire screen.



OSD display : Select types of OSD to be

displayed on the monitor.

 Camera name : Shows the camera’s

name used when registering the layout.

b Decoder time : Shows the time set to the

decoder.

c Alarm / Error : Shows alarm/error on the

monitor when occurred.

 IP address : Shows the camera’s IP

address.

 Border : Separates each camera’s screen with border lines.



Preview (

) : Previews changed OSD related settings, and applies when

confirmed.

Applying OSD setup changes does not affect monitor settings.

4. When done, click [Apply

( )

Audio setup

You can setup audio in/out settings of devices connected to the network video decoder.

1. From the Setup menu, select the

<Audio & Video ( )> tab.

2. Click <Audio setup>.

3. Adjust the audio I/O levels to your

preference.



Audio output : Set whether to use

audio or not, and its output method.



Gain : It is enabled when selected <Line out>, and set the value.

 Audio is produced only if the device connected supports audio input and set to on.

 To select HDMI audio out, the Monitor setting of Display Setup should be set to HDMI.

4. When done, click [Apply

( )

Gate1

192.168.1.201

01:01:01







1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 77 78

Comments to this Manuals

No comments

Samsung SPD-400 User Manual Page 38

Comments to this Manuals