Samsung HT-TKX725 User Manual download pdf (Page 50)

system setup

SETTING THE DELAY TIME

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each

speaker is the same.

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can

adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers.

Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the distance of Df

in the ﬁgure, set the mode as 0ms. Otherwise, change the

setting according to the table.

Distance between

Df and Dc

0.00 m 0.34 m 0.68 m 1.06 m 1.40 m 1.76 m

Delay Time

0 ms 1 ms 2 ms 3 ms 4 ms 5 ms

Setting REAR SPEAKERS

If the distance of Dc is equal to or longer than the distance of Dr

in the ﬁgure, set the mode as 0ms.

Otherwise, change the setting according to the table.

Distance between

Df and Dc

0.00 m 1.06 m 2.11 m 3.16 m 3.62 m 5.29 m

Delay Time

0 ms 3 ms 6 ms 9 ms 12 ms 15 ms

With PL II (Dolby Pro Logic II), the delay time may be different for each mode.

With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

The Center channel is only adjustable on 5.1 channel discs.

Ideal center speaker

placement

Df: The distance from front speaker

Dc: The distance from center speaker

Ds: The distance from surround speaker

It is desirable to place all speakers within this circle.

Ideal

surround

speaker

placement

Setting up the Speaker Delay Time

HT-TKX725-CIS-ENG_0319.indd 50 2009-03-28 �� 2:30:28

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 77 78

No comments

Samsung HT-TKX725 User Manual Page 50