Samsung DVD-P244 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
ENG-11ENG-10
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to S-Video or SCART Output.)
Method 2
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to S-Video.)
Method 3
DVD Player + TV with Scart Input Jacks (Audio & Video)
(The Video Output in Setup Menu must be set to SCART Output.)
Method 4
DVD Player + TV with interlace Scan Component Video Jacks
(The Video Output in Setup Menu must be set to Component (I-SCAN).)
Method 5
DVD Player + TV with Progressive Scan Component Video Jacks.
(The Video Output in Setup Menu must be set to Component (P-SCAN).)
If you want to convert Video Output to Progressive Scan, you have to select Component (P-SCAN) Video
Output in the Setup Menu. Then you have to select Ye s within 10 seconds.
If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video will not work.
Impor
tant Note
Consult your TV Users Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV Users Manuals instructions regarding Progressive Scan
settings in the TVs menu system.
Depending on your TV, the Method of connection may differ from the illustration above.
Good
picture
Better
picture
Best
picture
Best
picture
Optimum
picture
Basic Audio
AV
Cable
S-Video
Cable
Scart
Cables
(not
supplied)
OR OR OR
Video
Cables
Audio Output
Jacks
Video Output
Jack
S-Video
Jack
SCART Jack
Component Video
Jacks
(Interlace)
Component Video
Jacks
(Progressive)
TV
DVD
Player
Method 1 Method 2 Method 3 Method 4 Method 5
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Bef
ore Connecting the DVD Player
Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
Refer to the owners manual of the additional components you are connecting for more information on those
particular components.
Connection to an Audio System
Method 1 Method 2
RL
ANALOG AUDIO OUT
COAXIAL
OPTICAL
Analog Audio Output Jacks Digital Audio Output Jack
OR
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jack
AUDIO
SYSTEM
DVD
Player
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Comments to this Manuals

No comments