Samsung DVD-V8000 Instruction Manual download pdf (Page 36)

Technical Specifications

AUDIO 2 Stereo audio inputs, RCA Connector, -8dbm, 47KΩ,

front and rear

Inputs VIDEO 2 Composite video inputs, RCA Connector, 75Ω, 1Vp-p

RF Antenna or CATV Input, F-Connector, 75Ω

AUDIO 2 Stereo audio outputs, RCA Connector, -8dbm, 1.5KΩ

AUDIO (DVD only) 2 Digital audio outputs, 1 optical, 1 coaxial

VIDEO 1 Composite video output, RCA Connector, 75Ω, 1Vp-p

Outputs VIDEO (DVD only) 1 S-Video output, S-Connector, 75Ω, Y=1.0Vp-p,

C=0.286Vp-p

1 Component video output, 75Ω, Y=1.0Vp-p, Pb=0.7Vp-p,

Pr=0.7Vp-p

RF Channel 3 or 4

VIDEO SYSTEM

1/2-inch VHS system, 4 rotary head helical scanning;

FM azimuth luminance;chrominance: converted sub system

phase shift

AUDIO TRACK Normal: 1 track; Hi-Fi: 2 track

PLAY/RECORD TIME T-180 tape: SP 3 hours, SLP 9 hours

VCR FF/REW TIME T-120 tape: <2 minutes

HEADS Video: DA 4 rotary Duraheads™

Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear)

Control:1 stationary head

Erase: 1 full track, 1 audio track

WOW & FLUTTER Less than 0.005% (Hi-Fi)

FREQ. RESPONSE 20-20,000 Hz (Hi-Fi)

DISC COMPATIBILITY CD, CD-R, Not compatible with CD-R/W

DVD-Video, CD-Digital Audio (5” and 3.5”), CD-Video, MP3

files on CD-ROM

DVD FREQ. RESPONSE 96/48 kHz Sampling: 4 Hz-22kHz

S/N RATIO 110 dB

DYNAMIC RANGE 96 dB

THD 0.003 %

POWER REQUIREMENT 100~240V AC, 50~60 Hz, 29 watts

SYSTEM

CLOCK BACKUP TIME 6 hours

ENVIRONMENT 41-104 F (5-40 C); 10%-75% humidity

WEIGHT 21.5 lbs.

Your VCR remote control will work with Samsung televisions and

compatible brands.

To determine whether your television is compatible, follow the instructions

below.

1 Switch your television on.

2 Point the remote control towards the television.

3 Hold down the TV button and enter the two-figure code

corresponding to the brand of your television, by pressing the

appropriate numeric buttons.

Brand Codes Brand Codes

SAMSUNG 01, 14, 15, 23 LOEWE 28

SHARP 02, 16, 22 ZENITH 17

SONY 03 LG 06, 08, 18

RCA 07, 29 MAGNAVOX 04

TOSHIBA 09 EMERSON 21

PANASONIC 12 SANYO 05, 20

JVC 11 DAEWOO 19

HITACHI 10 NOBLEX 25

MITSUBISHI 13 TELEFUNKEN 26

NEWSAN 27

Result:

If your television is compatible with the remote control, it

will switch off. It is now programmed to operate with the

remote control.

➢ If several codes are indicated for your television brand, try

each one in turn until you find one that works.

☛

When you change the batteries in the remote control, you

must reprogram the code, following the same procedure.

You can then control the television using the following buttons.

Button Function

POWER

➀

Used to switch the television on and off.

INPUT

➁

Used to select an external source.

VOL + or –

➂

Used to adjust the volume of the television.

CH ( or )

➃

Used to select the required channel.

PREV.CH

➄

Used to jump directly to the previously viewed

channel.

MUTE

➅

Used to toggle the sound on and off.

➢

The various functions will not necessarily work on all

televisions. If you encounter problems, operate the

television directly.

Using the TV Buttons on the Remote Control

01616A DVD-V8000/TWN-Eng5 8/27/56 8:59 AM Page 68

Downloaded from www.Manualslib.com manuals search engine

Downloaded From DvDPlayer-Manual.com Samsung Manuals

1 2 ... 31 32 33 34 35 36 37

manuals search engine 1

Comments to this Manuals

No comments

Samsung DVD-V8000 Instruction Manual Page 36

Comments to this Manuals

Related products and manuals for DVD players Samsung DVD-V8000