Samsung HT-Z210 User Manual download pdf (Page 2)

4 connecting the video out to your tv

AUX IN 2

METHOD3

(supplied)

METHOD2

METHOD1

METHOD 1 : HDMI

Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI IN jack on your TV.

METHOD 2 : Component Video

If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from the Component Video

Output (Pr, Pb and Y) Connectors on the back of the main unit to the Component Video Input Connectors on your TV.

METHOD 3 : Composite Video

Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on your TV.

Resolutions available for the HDMI output are 480p, 720p,1080i/1080p.

This product operates in Interlace scan mode (480i) for Component Output.

After making the video connection, set the Video input source on your TV to match the corresponding Video

output (HDMI, Component or Composite) on your Home theater.

See your TV owner's manual for more information on how to select the TV's Video Input source.

If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the Home Theater using

the TV's remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).)

Please check the logo (If your TV has an logo, then it supports Anynet+ function.)



Choose one of the three methods for connecting to a TV.

4 - English

connecting audio from external components

5 - English

6 listening to radio

Listening to Radio

Remote Control

Press the TUNER button to select the FM band.

Tune in to the desired station.

Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.

Automatic Tuning 2 : Press and hold the ,

. button to automatically search for active broadcasting stations.

Manual Tuning : Brieﬂ y press the ,

. button to increase or decrease the frequency incrementally.

Main Unit

Press the FUNCTION button to select the FM band.

Select a broadcast station

Automatic Tuning 1 : Press the STOP (¦) button to select PRESET and then press the #,$ button to select the

preset station.

Automatic Tuning 2 : Press the

STOP (¦)

button to select MANUAL and then press and hold the

#,$

button to

automatically search the band.

Manual Tuning : Press the

STOP (¦)

button to select MANUAL and then brieﬂ y press the button to tune in to

a lower or higher frequency.

•

Connecting the FM Antenna

Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.

Slowly move the antenna wire around until you ﬁ nd a location where reception is good, then fasten it to a wall or other rigid

surface.

This unit does not receive AM broadcasts.



6 - English

AUX2 : Connecting an External Analog Component

Analog signal components such as a VCR.

Connect AUX IN 2 (Audio) on the Home Theater

to the Audio Out of the external analog

component.

Be sure to match connector colors.

Press the AUX button on the remote control to

select AUX 2 input.

You can also use the FUNCTION button on the main unit.

The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ FM.

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR

to this product.

•



AUX IN 2

Audio Cable (not supplied)

If the external analog

component has only one

Audio Out, connect either

left or right.

AUX1 : Connecting an External Component/MP3 player

Components such as an MP3 Player.

Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the

external component/MP3 player.

Press the AUX button on the remote control to select AUX1 input.

You can also use the FUNCTION button on the main unit.

The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ FM.

•

AUX IN 1

Audio OUT

Audio Cable (not supplied)

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

Connect the Digital Input (OPTICAL) on the

Home Theater to the Digital Output of the

external digital component.

Press the AUX button on the remote control to

select DIGITAL IN.

You can also use the FUNCTION button on the

main unit.

The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞

FM.

•

AUX IN 2

Optical Cable(not supplied)

AUX IN 2

FM Antenna(supplied)

1 2

Comments to this Manuals

No comments

Samsung HT-Z210 User Manual Page 2

Comments to this Manuals

Related products and manuals for DVD players Samsung HT-Z210