Samsung DV400EWHDWR/AA Technical Information download pdf (Page 19)

Samsung Wireless Audio Docks ((WADs) require a ﬁrmware update to work

correctly with the Galaxy S3 and Allshare. Without the soware update, there

will be a communication error between the Wireless Audio Dock’s Wi-Fi

module and the Galaxy S3. To ﬁx the issue, you must update the Micom,

MPEG, and Wi-Fi Modules (in that order).

- You must update the ﬁrmware in order: A then B then C.

- Each update must be completed separately. You cannot store multiple updates

on the same USB.

1. Download the latest ﬁrmware update from GSPN.

2. The ﬁrmware ﬁle will be compressed (.zip). Unzip the ﬁle to your PC.

3. The ﬁrmware package will have 2 to 3 ﬁles, each labeled as shown in the

above table.

4. Copy the “A” MICOM ﬁrmware (ending in .ssp) to the root folder of your USB.

5. Turn on the WAD, and then press the Function (F.) button repeatedly until the

USB Icon is lit.

6. Insert the USB into the USB port of the WAD. The update starts.

7. During the update, the USB icon will blink. When the update is complete, the

device will turn oﬀ.

8. Disconnect the USB from the WAD.

9. Repeat steps 4-8 with the “B” MPEG Firmware (ending in .ROM). It will take

about 2 minutes.

10. Repeat steps 4-8 with the “C” Wi-Fi Module Firmware (ending in .bcd),

except for the DA-E651. The whole process should take about 6 minutes.

o If you do not update in the correct order, you WILL cause permanent

damage to the product and you will have to replace the Airplay Module.

o The DA-E651 does not require a Wi-Fi Module Update.

Quick Tip:

Wireless Audio Docks and Allshare

17 CE Tech Tips

by Michael Vigliotti, Assistant Manager, Product Support

Detailed Firmware Update Procedure

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 40 41

No comments

Samsung DV400EWHDWR/AA Technical Information Page 19