Samsung SF-515M User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 47
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
2. Software Spec
󳀎C/C++ language
󳀎User Interface on LCD
󳀎GSM Driver
(5) GPRS connectivity
·GPRS multi-slot class 10 (Default)
·GPRS multi-sloc class 8 (Optional)
·GPRS mobile station class B
(6) DATA GPRS
·GPRS data downlink transfer: max. 85.6kbps
·GPRS data uplink transfer: max. 42.8kbps
·GPRS coding schemes: CS-1, CS-2, CS-3, CS-4
·Supports the protocols PAP (Password Authentication Protocol) usually used for PPP connections
·Integrates the TCP/IP protocol
·Support Packet Switched Broadcast Control Channel (PBCCH)
(7) SMS
·MT, MO, CB, Text and PDU mode
·SMS storage: SIM card
(8) Serial Port
·1200bps to 115200bps
·Serial Port can be used for AT command or data stream
·Supports RTS/CTS hardware handshake and software ON/OFF flow control
·Multiplex ability according to GSM 07.10 Multiplexer Protocol.
·Autobauding supports baud rate from 1200 bps to 57600 bps
Specification
1. Hardware Spec
1) OS : Microsoft Windows CE.NET 6.0
2) CPU : ARM11 500MHz Processor (ATLAS-IV)
3) Memory : 128MB SDRAM, 2G NAND Flash
4) Display interface : 7 inch TFT LCD / 800*480 Pixels / Touch screen
5) Audio : Stereo Audio CODEC, Built-in Speaker, MIC for GSM
6) Output : Data indication LED, Debug serial port / USB 2.0 Port
7) Power : 5V, 1.5A AC
8) SIM : Built-in SIM card slot / 1.8V, 3V SIM card support
9) GSM/GPRS features
(1) GSM Module : SIM900B
(2) Quad-band GSM/GPRS
·GSM 850MHz
·EGSM 900MHz
·DCS 1800MHz
·PCS 1900MHz
(3) GSM Class : Small MS
(4) Transmitting power:
·Class 4 (2W) at GSM 850 and EGSM 900
·Class 1 (1W) at DCS 18000 and PCS 1900
9.4 Practice Report
Chapter 10. Make PPP Connection
10.1 Basic Understanding of PPP
10.2 Configure PPP in the GSM Trainer
10.3 Change PPP in the GSM Trainer
10.4 Disconnect PPP in the GSM Trainer
Chapter 11. Internet Connection with Browser
11.1 Internet Connection
Chapter 12. MUX Driver Load / Unload
12.1 MUX driver load / unload
12.2 AT commands related to MUX driver load / unload
12.3 Practice
12.4 Practice Report
Chapter 13. Test Multiple Serial Port
13.1
Open COM6 through the practice program GsmTest
13.2 Open COM5 via PPP Connection for Internet
Chapter 14. Windows CE Configuration
14.1 Windows CE 6.0
14.2 ActiveSync
Chapter 15. Build & Debugging CE Application
15.1 Environment Setup for Application
15.2 SDK(Software Development Kit) Installation
15.3 Create Application
Chapter 16. SIM900B module
16.1 SIM900B Description
16.2 Application Interface
Chapter 17. Phonebook
17.1 AT Commands related to Phonebook
17.2 Practice
17.3 Practice Report
Appendix
1.
Introduction Global System for Mobile Communications
2. Introduction to WCDMA
3. LTE introduction
Cellular Mobile Trainer (GSM/GPRS Trainer)
- 03 -
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 46 47

Comments to this Manuals

No comments