Samsung APC2480BC User Manual download pdf (Page 10)

Cooling Your Room

E-10

You must select the COOL mode if you wish to adjust the :

◆ Cooling temperature

◆ Fan speed when cooling

If necessary, press the button.

Result:

◆ The air conditioner starts up in the Cool mode.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to

prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

IMPORTANT

If the is not displayed at the top of the remote control, press the button

on the remote control one or more times until it appears.

Result: ◆ The indoor unit beeps each time you press the button.

◆ The air conditioner runs in Cool mode.

You can change modes at any time.

To adjust the temperature, press the button one or more times until the

required temperature is displayed. Possible temperatures are between 18

and 30

C inclusive.

Result:

◆ Each time you press the button:

- The temperature is adjusted by 1

- The indoor unit beeps.

◆ The air conditioner starts cooling, provided that the room

◆ temperature is higher than the selected temperature.

Select the fan speed by pressing the button one or more times until

the required setting is displayed :

Result:

◆ Each time you press the button, the indoor unit beeps.

Automatic(rotated : ➔➔ )

Low

Medium

High

To control the direction of the air flow, refer to page 17.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

Samsung APC2480BC User Manual Page 10