Samsung AW4-4D FDSR User Manual download pdf (Page 29)

English - 29

OPERATING

(3) Alarm (Hold 3 sec for Filter Reset)

The Alarm button serves two purposes:

- To turn the door open alarm on and off

- To reset the water ﬁ lter life indicator.

1. Door Alarm Function

If the door alarm is set to On, an alarm beeps if

any refrigerator door is left open for more than

three minutes.

The beeping stops when you close the door.

The door alarm function is pre-set to On in the

factory.

You can turn it off by pressing and then releasing

the Alarm button.

You can turn it back on in the same fashion.

The icon lights up when the function is on.

When the Door Alarm function is on and the

alarm sound is triggered, the Door Alarm Icon

will blink while the alarm sounds.

2. Water Filter Life Indicator Function

After you replace the water ﬁ lter, touch and hold

this button for 3 seconds to reset the water ﬁ lter

life indicator.

When you reset the water ﬁ lter life indicator, the

Filter icon on the panel turns Off.

The Filter icon will turn red to let you know it is

time to change the water ﬁ lter after six months

(about 300 gallons).

Some areas have large amounts of lime in their

water, which causes the water ﬁ lter to clog more

quickly. If this is the case in your area, you will

have to change the ﬁ lter more frequently than

every six months.

(4) Lighting (Hold 3 sec for ºC ↔ ºF)

Lighting button serves two purposes:

- To turn the dispenser light on and off

- To switch the temperature units between ºC

and ºF

1. Light Function

Touching the Lighting button turns on the

Dispenser LED lamp in continuous mode so that

it stays on continuously. The button also lights

up. If you want the Dispenser lamp to come on

only when some one uses the dispenser, press

the Lighting button to turn the continuous mode

off.

2. To switch the temperature units between ºC

and ºF,

Touch and hold this button for 3 seconds to

select the temperature display you want.

Each time you press and hold the button, the ºC

and ºF temperature modes alternate and the ºC

or ºF icon lights up, indicating your selection.

(5) Fridge (Hold 3 sec for Power Cool)

The Fridge button serves two purposes:

- To set the Fridge to your desired temperature.

- To turn the Power Cool function on and off.

1. To set the Fridge temperature, press the

Fridge button.

You can set the temperature between 1°C and

7°C (44ºF and 34ºF).

2. Power Cool function

Touch and hold this button for 3 seconds to

decrease the time needed to cool products in

the Refrigerator.

It can be helpful if you need to quickly cool easily

spoiled items or if the temperature in the fridge

has warmed dramatically (For example, if the

door was left open).

DA68-03030C-01.indb 29DA68-03030C-01.indb 29 2015. 5. 7.  8:282015. 5. 7.  8:28

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 143 144

Comments to this Manuals

No comments

Samsung AW4-4D FDSR User Manual Page 29

Comments to this Manuals

Related products and manuals for Fridges Samsung AW4-4D FDSR