Samsung RF195AB Instruction Manual download pdf (Page 14)

Reassembling the freezer door (DRAWER TYPE - RF217,RF197)

1. Pull out the rails to the full length

on each sidle of the cabinet

evenly.

2. Hang the freezer door front onto

open slot on the sides.

3. With the 10mm wrench, reattach

4 bolts to connect the rail with

the door.

4. With the drawer pulled out fully,

insert the drawer box into the rail

system.

Reassembling the freezer door (SWING TYPE - RF195)

1. Place the hole in the bottom of

the freezer door over the right

side low hinge.

2. Replace the middle hinge connected to the freezer.

3. Insert and tighten the screw into the left and right middle hinges with a

philips screwdriver(+). Insert and tighten the 2 hex head bolts into the

left and right middle hinges with an allen wrench(3!16").

4. Replace the cap on the middle hinge.

14 settiqg up

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

No comments

Samsung RF195AB Instruction Manual Page 14