Samsung RM25 Series Specifications

Samsung 2 Door 2 Drawer Convertible Side by Side Training Manual RM255BARB RM255BASB

2-2) Model SpecificationPRODUCT SPECIFICATIONS Indirect Cooling Method RefrigeratorR-134a235g(8.29oz)38 35 70115V/60Hz41Rated V

PRODUCT SPECIFICATIONS 2-4) Electric Parts SpecificationItemModelSpecificationRM25󳀎󳀎󳀎󳀎󳀎MK183C-L2UR.S.C.RFREOL - 10 (ESTER)SPLIT FIN TYPESPLIT FIN TYP

PRODUCT SPECIFICATIONS Electric Components200W80 W100 W80 W 5 W5 W 7W5W3W60 OFF / 40 ON(140 OFF / 104 ON)SpecificationsItemsModelConducting F Def

PRODUCT SPECIFICATIONS 2-6) Optional Material SpecificationsPhotograph Part NameFILTER WATER-ASSYDA29-00012AASSY-INSTALLFILTERDA97-01469DINCANDENT LAM

3. OPERATING INSTRUCTIONS & INSTALLATION 3-1) Digital Panel...

1) Temperature Selection for the Freezer Compartment1-1) There are automatic temperature asettings of -2 for the freezer compartment and 38 for the fr

17OPERATING INSTRUCTIONS & INSTALLATION3-3) Power Freeze and Power cool Operation1) Power Freeze Operation1-1) Select 'Power Freeze' by

18OPERATING INSTRUCTIONS & INSTALLATION4) At Initial Power On4-1) At initial power on of fridge product when temperature in the freezer compartmen

=> ICE-MAKER stops operation if function of ICE OFF has been selected. After if cubic / crushedare selected, then water is supplied. If cubic / cru

1) Initial Operation This is operation at initial “power on” or at that after “power off” due to electricity interruption which operation is torestore

Authorized Training Center CampusesMaytag maintains an affiliation with ten institutions in the US and Canada to offer technical training sessions foc

OPERATING INSTRUCTIONS & INSTALLATION2) Water Supply Function2-1) After finishing the ice extraction operation (initial ice extraction operation,

4-2) Step 2 : operation is to overturn tray in order to separate the ice in the ice tray where tray is overturned bydirection rotation of ice extracti

OPERATING INSTRUCTIONS & INSTALLATION5) Test FunctionThis function is useful when there is a need for forced operation for testing purposes, A/S,

6-4) Display lamp is directly extinguished right at the stop selection, but it maintains stop condition after the completionof final water supply if w

FUNCTION OPERATION SPECIFICATIONFreezeInterlocked with the set temp. (5~ -13) of thefreezer compartmentSoft FreezeArctic Select Zone, 23operationCo

OPERATING INSTRUCTIONS & INSTALLATIONFUNCTION OPERATION SPECIFICATIONCoolFresh Select Zone temp. is controlled by interlock with the settemp. (33.

1) Forced Start Operation Function1-1) Forced start operation is selected if the test key is pressed once while in the test mode. At that time the bu

OPERATING INSTRUCTIONS & INSTALLATION3-13) Alarm Function3-14) Communication Error Display Function1) Button Touch Sound (Refer to Sounds Table)1-

1) Self-Diagnostics Function at Initial POWER ON1-1) MICOM judges internally by itself within several seconds whether there is any error in temperatur

OPERATING INSTRUCTIONS & INSTALLATIONIf a corresponding LED flickers, it meansabnormality of sensor and part.FREZER FRIDGE󳀌 Self-Diagnostics Check

IMPORTANT SAFETY NOTICEThis service guide is for service technicians with adequatebackgrounds and electrical, electronic, and mechanical experience.An

OPERATING INSTRUCTIONS & INSTALLATIONNo ITEMI/M-SENSORR-SENSORR-FAN ERROR-CR SENSOREXT-SENSORF-SENSORTROUBLEREMARK123456789101112131415DEFROSTINGS

OPERATING INSTRUCTIONS & INSTALLATIONNo ITEMF-DEF-SENSORF-FAN ERRORC-FAN ERRORCF-SENSORCF-FAN ERRORCR-FAN ERROR-TROUBLEREMARK161718192021222324252

OPERATING INSTRUCTIONS & INSTALLATION3-16) Load Condition Display Function1) If the freezing setting + the refrigeration setting keys are pressed

OPERATING INSTRUCTIONS & INSTALLATION3-17) Operation Condition Recovery Function in Case of Power Outage1) In case of momentary electricity interr

OPERATING INSTRUCTIONS & INSTALLATIONKey Functions After Converting to Option Mode1) For example if you wish to shift the freezer compartment stan

OPERATING INSTRUCTIONS & INSTALLATION4) If "6" is set as shown in the following option table for the freezer compartment after setting a

Application Example) When to lower the reference temperature of the FreezerCompartment to 26.62) Temperature Change Table for the Refrigerator Compa

OPERATING INSTRUCTIONS & INSTALLATION The following options apply only to models attached with ice maker.In case of basic model, the following it

5. DISASSEMBLY AND REASSEMBLY 5-1) Door Assy 5-2) Door Sub Parts Control Panel………………………………………………………...…… 47 Door Gasket………………………………………

DISASSEMBLY AND REASSEMBLYRemoving the Freezer DoorRemoving the Front Leg Cover1) With the door closed, remove the upper hinge cover (➀) using a screw

CONTENTSPRECAUTIONS ...5 PRODUCT SPECIFICATIONS ...

DISASSEMBLY AND REASSEMBLY41Removing the Freezer Door4) Removethe door from the lower hinge (➆)bycarefully lifting the door (➇).5) Remove hinge screws

DISASSEMBLY AND REASSEMBLYRemoving the Refrigerator Door3) Removethe door from the lower hinge (➃)bylifting the door (➄).4) Remove the hinge screw (➅)

DISASSEMBLY AND REASSEMBLYHow to Disassemble the Fresh Select Zone Door1) Open the Fresh Select Zone Door. 2) Take out the box in the Fresh Select Zon

Reattaching the Freezer DoorDISASSEMBLY AND REASSEMBLY1) Reattach the hinge screws (➀). 2) Place the hole in the bottom of the door (➂) overthe hinge

Reattaching the Refrigerator DoorDISASSEMBLY AND REASSEMBLY1) Reattach hinge screws (➀). 2) Place the hole in the bottom of the door (➂) overthe hinge

Reattaching the Front Leg CoverDISASSEMBLY AND REASSEMBLYFRONT LEG COVERHold the leg-front-cover with both hands and insert it while sliding the hoo

How to Disassemble the Arctic Select Zone DoorDISASSEMBLY AND REASSEMBLY1) Open the Arctic Select Zone Door. 2) Take the box out of the Arctic SelectZ

DISASSEMBLY AND REASSEMBLY1) Slip the compression nut and plastic ferrulethrough the plastic tube.2) After inserting the sleeve, tighten the compressi

1. Insert a flat-blade screwdriver in the slot as shown,and unlock the tabs.2. Lift it up as shown3. Disconnect the wire connector.The door handles al

DISASSEMBLY AND REASSEMBLYThe refrigerator has a door light switch located inthe upper right corner for the refrigerator.1. Use a small flat-blade scr

1. PRECAUTIONS(SAFETY WARNINGS)Unplug the refrigerator before making any repairs or any replacements.󳄇 Avoid electric shock.Use rated components for

The door bins allow storage of perishable items.1. Push the bin up and slide it out.This switch is located in the left-hand portion ofthe freezer and

DISASSEMBLY AND REASSEMBLYThe ice dispenser is located in the upper portionof freezer. This assembly is to store anddispense ice made by the icemaker.

This shelf is designed to support the ice maker &ice dispenser. 1. Remove the screws(2) on the side of the case2. Slide the case out while disconn

DISASSEMBLY AND REASSEMBLYThe Partition is located in the lower part of thefreezer.Before separating the partition,take outall the shelves and cases w

DISASSEMBLY AND REASSEMBLYThe Evaporator fan motor in the arctic selectzone is located in the lower part of evaporatorcover.1. Remove the screws(2 pie

The Ice maker thermistor is located in its bottom.The temperature signal is sent to themicro-processor.DISASSEMBLY AND REASSEMBLYIce-Maker ThermistorT

For the disassembly of evaporator cover, watertank and partition should be disassembledfirst.1. Remove the cap screws(4 pieces), and removeother screw

DISASSEMBLY AND REASSEMBLYThe evaporator is located in the bottom of therefrigerator.1. Take off the partition in the refrigerator.2. Take off the eva

DISASSEMBLY AND REASSEMBLY1.First separate the two lamp- covers which are in theupper part.UPPER DUCTWORK2. Unscrew the lower part and the center of t

1. Disconnect the power cord of the refrigerator.2. Remove the fixing screws (8) of compressor cover.3. Slide up and take off the compressor cover

PRECAUTIONS(SAFETY WARNINGS)Read all instructions before repairing the product, and follow to the instructionsin order to prevent danger or property d

DISASSEMBLY AND REASSEMBLYREMOVING THE ARCTIC SELECT ZONE ACCESSORIESREMOVING THE FRESH SELECT ZONE ACCESSORIESNOTE•Empty the basket before taking it

Plug in again and check for looseplug.Check at the SMPS PBA.- Check Main PCB connection.- Check the connections between upperhinge and CABI-door.?- C

DIAGNOSTIC6-2) If the compressor doesn’t work normallyDoes 5 min pass afterCOMP. OFF?StartRecheck the comp after a 5 min.Did buzzer sound on forced op

DIAGNOSTIC6-3) If the defrost function doesn’t workIs defrosting sensor by self-diagnosis normal?StartExchange and troubleshoot thecorresponding senso

DIAGNOSTIC6-4) If there is a trouble with self-diagnosis(sensor failure)1) If the ambient temperature sensor has troubleThis model has an ambient temp

󳀎 Freezer door MICOM No. 49,Fridge door MICOM No. 47 CF - door micom no.50CR - door micom no.48– Regular voltages are 5V to Open :0V to Close.󳀎 Separa

DIAGNOSTICDoes it sound Ding-Dong’ if youpress a button on front panel?StartMain PCB is normal, buzzer isnormal.Check the panel PCB according to ,how

DIAGNOSTIC6-6) If the panel PCB is not working normally:1) Where all lights of the panel PCB are disabled, or only some lamps are disabled.2) Where th

DIAGNOSTIC6-7) If fan motor doesn’t working normaly.󳀏This refrigerator uses a BLDC FAN motor and this motor is driven by 8 ~12V DC.󳀏Under the normal c

DIAGNOSTIC71Is the COMP OFF State?StartExecute Forced operation.Is the voltage DC 0-1V between GND of themain-PCB section and CN76 pin No. 2?Fan works

PRECAUTIONS(SAFETY WARNINGS)❈ Please ler users know following warnings & cautions in detail.Do not allow users to put glassbottles or similar in t

DIAGNOSTIC6-9) If Ice Cubed or/and Ice Crushed don't work normallyStartWhat is the ice status on the panel Display?Does ice come out when drawing

DIAGNOSTIC6-8) If Indoor Lamp of Freezer/Refrigerator doesn’t light1. When replacing the indoor lamp of freezer or refrigerator, please turn the power

Check CN50 connector, wireand failure of water s/w itself.NOMain PCB failure: Replace it(IC74 failure).NOMain PCB failure: Replace it.(RY7D Relay Cont

1. Dispenser LED Lamp is working with 12V DC.(=Dispenser LED Lamp has 12V DC power supply.) Anyone without approval or other thanthe qualified enginee

9. WIRING DIAGRAM7373

PCB DIAGRAM10-2) CONNECTOR ARRANGEMENT (Main Board)7474

CIRCUIT(SCHEMATIC) DIAGRAM7575

Circuit Descriptions10-3) CONN ECTOR ARRANGEMENT (SMP S Board)7676

Circuit Descriptions12-1) POWER BUSThis POWER BUS, and SMPS (Switch Mode Power Supply), is an improved efficiency power- convertion circuit forconvert

CIRCUIT DESCRIPTIONS104Temp.()-43.6-41.8-40.0-38.2-36.4-34.6-32.8-31.0-29.2-27.4-25.6-23.8-22.0-20.2-18.416.6-14.8-13.0-11.2-9.4-7.6-5.8-4.0-2.2-0.41

2. PRODUCT SPECIFICATIONS 2-1) Introduction of main functions...8 2-2) Model Specifications...

CIRCUIT DESCRIPTIONS1) As shown in the Figure, C/F, C/R FAN are connected to the CN75 connector, and FAN MOTOR consists ofND, VCC, FG.2) If you inten

CIRCUIT DESCRIPTIONS MOTOR DRIVE CIRCUIT DESCRIPTIONS1) This refrigerator uses BLDC MOTORS for the purpose of saving power consumption, the BLDC MOTO

13. REFERENCE INFORMATION13-1) Model Name(Nomenclature)RM25B/XAAProducts: M-MULTI DOORLABEL LOCATIONBuyer only U.S.power applicableDOOR specifications

REFERENCE INFORMATION13-2) Q & AProblemThe refrigerator does notwork sufficiently or at allThe food in therefrigerator is frozenUnusual noises or

REFERENCE INFORMATIONProblemSmall or hollow cubesSlow ice cube freezingOrange glow in the freezerCube dispenser does notwork(on some models)Water has

Compressor  Sub-condenser  Hot Pipe  Dryer  Step valve  R Capillary Tube  R/CR evaporator  C - Capillary Tube REFERENCE INFORMATION13-3) Ad

REFERENCE INFORMATIONFreezerRefrigerator8585

Notes:

Be Aware, Be Alert Always work safely. On the Job, On the Road, In the Home Every Time, All the Time

2-1) Introduction of main function9PRODUCT SPECIFICATIONS THE SAMSUNG side by side refrigerator has the following characteristics:NOTEThis operation