Samsung SPINPOINT HS122JF User Manual

Browse online or download User Manual for Internal hard drives Samsung SPINPOINT HS122JF. Samsung SPINPOINT HS122JF User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Ultra mobile SATA
Spinpoint N1C
80GB 120GB
HS08XJF HS122JF
FEATURES
• MAX.60GB Formatted Capacity Per Disk • SATA S.M.A.R.T Compliant
• High Speed Digital Signal Processor Based Architecture • SATA 48-bit Address Feature Set
• Low Power HDC • Multi-Burst On-The-Fly Error Correction
• Advanced Power Management Control • SilentSeek™
• Fluid Dynamic Bearing Spindle Motor Technology • Free Fall Sensor (optional)
Capacity
80 / 120 GB
Temperature
Interface
SATA 1.5Gbps Operating
5 ~ 60
Rotational Speed
5400 RPM class Non-operating
-40 ~ 85
Buffer DRAM Size
8 MB
Humidity (non-condensing)
Byte per Sector
512 Operating
8 ~ 90
Non-operating
8 ~ 90
PERFORMANCE SPECIFICATION Linear Shock (1/2 sine pulse)
Capacity
DRIVE CONFIGURATION ENVIRONMENTAL SPECIFICATIONS
Model
Average Seek time (typical)
14.0 ms Operating, 2ms 600 G
Media Transfer Rate (Max.)
550 Mb/s Non-operating, 1ms 1500 G
Interface Transfer Rate (Max.)
1.5 Gbps
Vibration
Drive Ready Time (typical)
4.0 sec Operating 0.67 Grms
Altitude (relative to sea level)
RELIABILITY SPECIFICATION
Operating -300 to 3.000 m
Non-recoverable Read Error
1 sector in 10^13 bits Non-operating -400 to 15,000 m
Controlled Ramp Load/Unload
600,000
PHYSICAL DIMENSION
ACOUSTICS Height
8.0 mm
Idle
2.4 Bel
Width
78.5 mm
Performance Seek
2.6 Bel
Length
54.0 mm
Weight (Max.)
62 g
POWER REQUIREMENTS
Voltage
+3.3V ±5%
Spin-up Current (Max.)
540 mA
Seek (typical)
1.30 W
Read/Write (typical)
1.60 W
* Note : Design and specifications are subject to change without prior notice.
Idle (typical)
0.40 W
1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes
Standby (typical)
0.12 W
* Accessible capacity may vary as some OS uses binary numbering system for
Sleep (typical)
0.10 W
reported capacity.
* A small portion of the (8MB) buffer memory is reserved for firmware use.
1.8" N1C SATA product specification Rev.08
Match with 1.8" N1C SATA product manual Rev.07
Page view 0
1

Summary of Contents

Page 1 - Spinpoint N1C

Ultra mobile SATASpinpoint N1C80GB 120GBHS08XJF HS122JFFEATURES• MAX.60GB Formatted Capacity Per Disk • SATA S.M.A.R.T Compliant• High Speed Digital S

Comments to this Manuals

No comments