Network Setting
Some of the procedures may differ depending on the version of the operating system.
In addition, the gures of the screens may differ from the actual screens.
Setting Up the Wired Network
1
Connect the LAN cable to the wired
LAN port.
2
Click the network icon .
3
When the Network Wizard appears,
click Advanced.
To use DHCP, click Automatic
(DHCP).
To use a static IP address, click
Manual (M)
, enter the IP Address,
Subnet Mask, Default Gateway
, and
DNS elds and click Finish.
When DHCP is not supported, ask
your network administrator for the IP
address information.
4
When the network is connected, the
icon turns green.
Now, you can use the network.
Comments to this Manuals