SyncMaster 460UTn-2, 460UTn2-UD2, 460UT-2, 460UTn-B, 460UT-BLCD DisplayUser ManualThe color and the appearance may differ depending on the product, an
IntroductionPackage ContentsChecking the Contents of the PackageRemove the lock from the package box, as shown in the figure above.Lift up the package
Note• When a Horizontal or Vertical split is over four, use a resolution of XGA (1024 x 768) orgreater to prevent any picture degradation.• Size will
Sets how many parts the screen should be divided horizontally.Fifteen adjustment levels: 1~15. NoteIf Vertical is set to 15, the maximum value for Hor
NoteThis function is not available when the power is turned off.Pixel ShiftPixel ShiftTo prevent after-images on the screen, you can use this functio
TimeSet the time interval for performing the horizontal or vertical movement, respectively.TimerTimerYou can set the timer for Screen Burn Protection.
PeriodUse this function to set the execution period for each mode set in the timer.TimeWithin the set period of time specify a time for execution.• Mo
PixelThis function prevents after-images by moving many pixels on the screen.Side GraySelect the brightness of the grey for the screen background.• OF
5. 1366 X 768 NoteSelecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz,1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or
Selects auto or manual for the fan speed settings.Fan Speed SettingSets the fan speed within a range of 0 and 100. NoteEnabled when Fan Control is set
Auto PowerEnables or disables Auto Power for the product.• Off• On NoteWhen Auto Power is On, the product will power on automatically as soon as it is
NoteEnabled only in PC mode.Standby ControlSets the standby mode, which will be activated when no input signal is detected.• OffA message will read &
ManualsQuick Setup Guide Warranty Card(Not available in all loca-tions)User ManualMagicInfo Software DVD(Applicable to the460UTn-2, 460UTn2-UD2,460UTn
Source OSD• Off• OnNot Optimum Mode OSD• Off• OnNo Signal OSD• Off• OnMDC OSD• OffAdjusting the LCD Display
• OnSoftware UpgradePerforms a software upgrade.1. Connect the product to a computer via a digital signal such as DVI or HDMI. Click theBMP image file
Setup ResetReset all the values for a setting.Reset AllReset all the settings for the display.Multi ControlAvailable Modes• PC / DVI / DisplayPort• AV
Use to select the transmitter functions of the individual SET. Only a SET where the IDcorresponds to the transmitter setting becomes activated.• MDC C
• The preset password for the LCD Display is "000000".• The server program's Power-On option works only if the LCD Display's power
In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktopto make your settings for TCP/IP. You just do that at step
You can select which rotation type will be applied to your device.5. Setup InformationShows the settings that have been selected by the user. NoteIf t
TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center forproblems that
• Do not use benzene, thinner or other flammable sub-stances.2) Maintaining the Flat Panel Display Screen.Clean with a soft cloth (cotton flannel).• N
A: Check if the signal cable between the computer and the LCD Display is securely con-nected.(Refer to Connecting a Computer)Problems related to the S
Sold separatelyRGB to BNC Cable RGB to Component Cable Network Box(Applicable to the460UT-2, 460UT-B modelonly) Wall Mount KIT TV Tuner Box (US Only)
Q: The screen color is inconsistent.A: Adjust color using Custom under OSD Color Adjustment menu.Q: The color image is distorted by dark shadows.A: Ad
A: Check if a special fluorescent or neon lamp is on in the vicinity.Q & AQ: How can I change the frequency?A: The frequency can be changed by rec
SpecificationsGeneralGeneralModel Name SyncMaster 460UTn-2 / 460UTn2-UD2 / 460UT-2 / 460UTn-B / 460UT-BLCD PanelSize 46 inches (116 cm)Display area 10
VESA Mounting Interface600 mm × 400 mmEnvironmental considerationsOperating 460UTn-2460UTn2-UD2460UTn-BTemperature : 50°F ~ 104°F (10°C ~ 40°C)Humidit
Class A (Information Communication equipment for industrial use) : 460UTn-2,460UTn2-UD2, 460UTn-BAttention dealers and users. This device is register
Preset Timing ModesIf the signal transferred from the computer is the same as the following Preset Timing Modes,the screen will be adjusted automatica
InformationFor a Better Display Adjust the computer resolution and screen injection rate (refresh rate) on thecomputer as described below to enjoy the
Power Off, Screen Saver, or Power Save Mode• Turn the power off for 2 hours after 12 hours in use• Set the Monitor to power off with the PC Display Pr
Change the characters color periodically• Use Bright colors with little difference in luminance.- Cycle : Change the characters color and background c
• Apply the Screen Erasing function- Symptom: 2 Vertical blocks move while erasing the displayInformation
Power indicatorShows PowerSaver mode by blinking green NoteSee PowerSaver described in the manual for further information regardingpower saving functi
AppendixContact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact theSAMSUNG customer care cent
Europehttp://www.samsung.com/be_fr (French)BOSNIA 05 133 1999 http://www.samsung.comBULGARIA 07001 33 11 http://www.samsung.comCROATIA 062 SAMSUNG (06
EuropeSWITZERLAND 0848 - SAMSUNG (7267864,CHF 0.08/min)http://www.samsung.com/chhttp://www.samsung.com/ch_fr/(French)U.K 0330 SAMSUNG (7267864) http:/
Asia PacificJAPAN 0120-327-527 http://www.samsung.comMALAYSIA 1800-88-9999 http://www.samsung.comPHILIPPINES 1-800-10-SAMSUNG(726-7864) for PLDT1-800-
tance between two dots of the same color is called the 'DotPitch'. Unit: mmVertical Frequency The screen must be redrawn several times per s
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)Business users should contact their supplier and check the terms andcond
AuthorityInformation in this document is subject to change without notice.© 2010 Samsung Electronics Co., Ltd. All rights reserved.Reproduction in any
DVI OUT (LOOPOUT)• Connect a monitor to another monitorthrough a DVI, DVI to HDMI cable.• Connect a DVI or DVI-HDMI cable to [DVIOUT (LOOPOUT)] on th
Connect the [RGB/DVI/DP/HDMI AUDIOIN] terminal of the monitor and the speakeroutput terminal of your computer's soundcard using a stereo cable (s
• To use a TV tuner box (US Only), makesure to connect it to the [HDMI IN 1] ter-minal. HDMI IN 2 (MAGICINFO)• Connect the [HDMI IN 2 (MAGICINFO)]term
RGB OUTMagicInfo video output port NoteApplicable to the 460UTn-2, 460UTn2-UD2,460UTn-B model only. MAGICINFO OUTOutputs MagicInfo DP signals. It
3. Insert the Kensington Lock into the se-curity slot ( ) on the back of the dis-play.4.Lock the lock ( ). Note• You must purchase the Kensington Lock
MUTE CH/P TVMENU RETURN EXITMagicInfo POWERTurns the product On. OFFTurns the product Off. Number ButtonsUsed to enter the password during the OS
Safety InstructionsNotational NoteThese safety instructions must be followed to ensure your safety and prevent property dam-age.Make sure to read the
TTX/MIXTV channels provide written information services via tele-text.- Teletext Buttons- This is activated when a TV tuner box is installed. MTS/D
Mechanical LayoutMechanical LayoutLCD Display HeadIntroduction
Installation VESA Bracket• When installing VESA, make sure to comply with the international VESA standards.• Purchasing VESA Bracket and Installation
• This product is for installing on cement walls. The product may not stay in place wheninstalled on plaster or wood.ComponentsOnly use the components
If the length is too short or long, loosen all or some of the 4screws on the wall bracket toadjust the length.A - Length between the two locking holes
2. Insert the screw B into the plastic hanger.Notice• Mount the product on the wall bracket and make sure it is properly fixed to the leftand right pl
A - LCD DisplayB - Wall BracketC - WallWall Bracket Angle AdjustmentAdjust the bracket angle to -2° before installing it on the wall.1. Fix the produc
ConnectionsConnecting a ComputerThere are several ways to connect the computer to the monitor. Chooseone from the following options. Using the D-sub
NoteSelect HDMI2 (only with a 460UT-2, 460UT-B model) or HDMI1 as an inputsource when connected to the PC via an HDMI cable.To obtain normal picture
Connect between the [DVI OUT(LOOPOUT)] port on the LCD Display andthe input port on another monitor using a DVI cable. Connect between the [AUDIO O
Ensure that the power plug is plugged into the power outletfirmly and correctly.• Otherwise, this may result in fire. Do not forcefully bend or pull
Connecting to a Camcorder1. Locate the AV output jacks on the camcorder. They are usually found onthe side or back of the camcorder. Connect a video c
Connecting Using a HDMI Cable1. Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a460UT-2, 460UT-B model) or [HDMI IN 1] on the product and
nect the opposite jack to the [RGB/DVI/DP/HDMI AUDIO IN] terminal ofthe LCD Display.3. Press SOURCE on the product or remote control and select "
Connecting a DTV Set Top (Cable/Satellite) Box Connect a RGB to Component cable between the [RGB/COMPONENTIN] port on the LCD Display and the PR, Y,
Connecting a LAN Cable1. Connect the LAN cable between the [LAN] port on the product and the[LAN] port on your PC. NoteApplicable to the 460UTn-2, 460
Using the SoftwareMonitor Driver NoteWhen prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Drive
NoteThis monitor driver is certified by Microsoft, and installing it will not damage your system.The certified driver will be posted on Samsung Monit
If the message "Windows needs..." is displayed, as shown in the figure below, click"Continue". NoteThis monitor driver is under ce
9. Select the model that matches your monitor from the list of monitor models on the screen,and click "Next". 10. Click "Close" →
1. Insert CD into the CD-ROM drive.2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon.3. Cl
DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIG-ARETTES AND ANY HEATING APPLIANCES NEAR THEPRODUCT.• Otherwise, this may result in fire. Keep heating a
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model inthe model list and click the "Next" button.
10. Monitor driver installation is completed.Microsoft® Windows® 2000 Operating SystemWhen you can see "Digital Signature Not Found" on you
If you can see the "Digital Signature Not Found" window, then click the "Yes" button.Then click the "Finish" button and
5. Set a Keyboard for your computer.6. The next screen is for setting your monitor.7. First of all, set a horizontal frequency for your monitor. (You
MDC Program Installation/UninstallationInstallation1 Insert the installation CD into the CD-ROM drive.2 Click the MDC Unified installation program. If
Connecting to MDCUsing MDC via RS-232C (serial data communications standards)An RS-232C serial cable must be connected to the serial ports on the PC a
Using MDC via EthernetEnter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an
Connection ManagementConnection management includes the Connection list and Connection list modification options.Connection list – Connection list sho
Auto Set IDAuto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs
Command RetryThis feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupte
When cleaning the power plug pins or dusting the power outlet,clean it with a dry cloth.• Otherwise, it may result in fire. When cleaning the product
Getting Started with MDC1 To start the program, click Start Programs Samsung MDC Unified.2 Click Add to add a display device.z If the connection is
z If the connection is established via Ethernet, enter the IP that was entered for the display device.
Main Screen Layout Menu BarChange the status of a display device or the properties of the program. Device CategoryView a list of connected display dev
MenusYou can power on or off a selected device or change the input source or volume of the device.Choose display devices from the list of sets, and se
This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor error, or lamp error.Select
Screen AdjustmentThe screen settings (contrast, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Pictur
OptionsDynamic ContrastAdjust the Dynamic Contrast for the selected display device. Gamma ControlChange the gamma value for the selected display. Auto
SizePicture SizeAdjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does no
Sound AdjustmentYou can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item wil
System SetupChoose display devices from the list of sets, and select the System tab. Video WallThe Video Wall function can be used to display part of
If thunder or lightning is occurring, do not touch the power cordor antenna cable.• Otherwise, this may result in electric shock or fire. Do not try
HSelect the number of horizontal display devices.A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assig
PIPBasic information required to adjust PIP will appear in the menu screen. z PIP will be disabled when Video Wall is ON.z Note that Picture Size is d
GeneralUser Auto ColorAutomatically adjust the screen colors. Available only in PC mode. Auto PowerSet the product to automatically power on.Standby C
SecuritySafety LockLock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button LockLock the buttons on the display device. To unlock
TimeClock SetChange the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, n
Once: Activate the timer only one time. EveryDay: Activate the timer every day. Mon~Fri: Activate the timer from Monday through Friday. Mon~Sat:
Screen Burn ProtectionPixel ShiftMove the screen slightly at specified time intervals to prevent screen burn-in.Screen SaverThis function prevents scr
The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended pe
ResetReset PictureReset the screen settings.Reset SoundReset the sound settings.Reset SystemReset the system settings.Reset AllReset the screen, soun
Other FunctionsResizing a WindowPlace the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size
To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitorfor one (1) hour.This reduc
Group ManagementCreating GroupsCreate groups and manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and se
The Add on the same level button is enabled only if at least one group is created. 3 Enter the group name.Deleting Groups1 Select a group name, and c
Schedule ManagementCreating SchedulesCreate and register a schedule on a group basis.1 Click All Schedule List in the schedule section on the left sid
3 Click Add below the Device Group item, and select the group you want to add a schedule to.4 Select Date&Time/Action and click OK. The schedule w
Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitte
How display properties are shown when multiple displays are used1 When no display is selected: The default value is displayed.2 When one display is se
Adjusting the LCD DisplayInputAvailable Modes• PC / DVI / DisplayPort• AV• Component• HDMI• MagicInfo• TV Note• A TV tuner box (sold separately) must
NoteThe RGB/COMPONENT IN port is compatible with RGB (PC) and Component signals.However, the picture may display abnormally if the connected external
• PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort• DVI : PC• AV : PC• HDMI : PC• Display Port : PCSizeChanges the Size of the PIP window. Note<Size>
• OpaqueEdit NameName the input device connected to the input jacks to make your input source selectioneasier.VCR / DVD / Cable STB / HD STB / Satelli
The batteries (and rechargeable batteries) are not ordinary re-fuse and must be returned for recycling purposes. The customeris responsible for retur
Refer to PIP > Source for compatible signals for each primary input source.Source AutoSwitchWhen the Source AutoSwitch is On, the display video sou
Primary SourceSpecify Primary Source for the automatic input source.Secondary SourceSpecify Secondary Source for the automatic input source.Picture [P
NoteNot available when Dynamic Contrast is set to On.1. InformationRecommended for communicating exact information (e.g. public information).2. Adver
• Mode 1Sets the picture brighter than Natural.• Mode 2Sets the picture darker than Mode 1.• Mode 3Increases the contrast between dark and bright colo
3. BlueColor Temp. Color Temp. is a measure of the 'warmth' of the image colors. Note• Not available when Dynamic Contrast is set to On.• Th
Auto AdjustmentThe values of Fine, Coarse, Position are adjusted automatically. By changing the resolutionin the control panel, the auto function is p
6. B-OffsetSizeThe Size can be switched.1. 16:92. 4:3PIP PictureAdjusts the PIP Screen Settings. Note• Available Modes: PIP On1. ContrastAdjusts the C
NotePIP input only operates in AV, HDMI, or Component mode.5. TintAdds a natural tone to the PIP window. NotePIP input only operates in AV, HDMI, or
• AV• Component• HDMI• MagicInfo• TV Note• A TV tuner box (sold separately) must be connected to use the TV. (US Only)• For an 460UT-2, 460UT-B model,
BrightnessAdjusts the Brightness.SharpnessAdjusts the picture Sharpness.ColorAdjusts the picture Color.TintAdds a natural tone to the display. NoteOpe
Do not put any heavy objects on the product.• This may result in personal injury and/or damage to the prod-uct.Safety Instructions
NoteIf you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp.function is disabled.Color Temp.Color temp. is a measure of th
Digital NR (Digital Noise Reduction)Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allowsyou to enjoy clearer a
Film Mode calibrates unnatural pictures that may occur in a movie (which is in 24 frames).Moving subtitles may appear corrupted when this mode is enab
Lamp ControlAdjusts the inverter lamp in order to reduce energy consumption. NoteNot available when Dynamic Contrast is set to On.Picture ResetReset t
Selects Music when watching music videos or concerts.3. MovieSelects Movie when viewing movies.4. SpeechSelects Speech when watching a show that is mo
SRS TS XTSRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannelcontent over two speakers. TruSurround XT delivers
• HDMI• MagicInfo• TV Note• A TV tuner box (sold separately) must be connected to use the TV. (US Only)• For an 460UT-2, 460UT-B model, MagicInfo can
Turns the LCD Display off automatically at certain times.1. Off2. 303. 604. 905. 1206. 1507. 180Timer1 / Timer2 / Timer3You can set the LCD display to
You can delete selected holidays. Note• Only enabled when registered holidays are selected.• More than one holiday can be selected and deleted.• Delet
Safety LockChange PINThe password can be changed.The preset password for the LCD Display is "0000". NoteIf you forgot your password, press t
Comments to this Manuals