Samsung SEK-1000 User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 184
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
8
Positioner Settings: Configures the aerial positioner.
Try Now
Positioner: Enables or disables the positioned control.
Positioner Type: Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite
Automatic Location System).
My Longitude: Sets the longitude for my location.
My Latitude: Sets the latitude for my location.
Satellite Longitude Settings: Sets the longitude of user defined satellites.
User Mode: Sets the position of satellite aerial according to each satellite.
If you store the current position of satellite aerial according to a certain satellite, when the signal
of that satellite is needed, the satellite aerial can be moved to pre-populated position.
Satellite: Selects the satellite to set the position for.
Transponder: Selects a transponder from the list for signal reception.
Moving Mode: Selects the movement mode between discrete and continuous movement.
Step Size: Adjusts the step size degrees for the aerial rotation. Step Size is available when
Moving Mode is set to Step.
Go To Stored Position: Rotates the aerial to the stored satellite position.
Aerial Position: Adjusts and stores the aerial position for the selected satellite.
Store Current Position: Stores current position as the selected positioner limit.
Installer Mode: Sets limits to the scope of movement of satellite aerial or reset the position.
Generally, installation guide uses this function.
Limit Position: Selects the direction of the positioner Limit.
Aerial Position: Adjusts and stores the aerial position for the selected satellite.
Store Current Position: Stores the current position as the selected positioner Limit.
Go to zero: Moves the aerial to the reference position.
Reset positioner limit: Allows the aerial to rotate over the full arc.
Reset All Settings: All satellite settings will be reset to the initial values.
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 183 184

Comments to this Manuals

No comments