Samsung TXN2745FP Operations Instructions download pdf (Page 18)

INSTALLATION

Connect a coaxial cable

between the ANTENNA

OUT terminal on the VCR

and the antenna

terminal on the TV.

Connect a set of audio

cables between the

AUDIO OUT jacks on the

VCR and the AUDIO

jacks(AV1~AV3) on the TV.

Connect a video cable

between the VIDEO OUT

jack on the VCR and the

VIDEO jack(AV1~AV3) on

the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

A coaxial cable is usually included with a VCR. (If not, check your local electronics

store).

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up

to the left and right audio input jacks of the TV. If your VCR is stereo, you must con-

nect two cables.

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a

cable TV system (according to the instructions on pages 14-16). Skip step 1 if you have

not yet connected to an antenna or a cable system.

Unplug the cable or

antenna from the back of

the TV.

Connect the cable or

antenna to the

ANTENNA IN terminal on

the back of the VCR.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 79 80

No comments

Samsung TXN2745FP Operations Instructions Page 18