Samsung UN50H6203AF Specifications download pdf (Page 100)

Setting the Time and Using the Timer

Setting the Current Time

MENU > System > Time > Clock

Try Now

Set the clock manually or automatically.

To view the time after the clock is set, press the INFO button on your remote.

The clock must be reset every time the power is disconnected.

Setting the Clock using Digital Broadcast Info

MENU > System > Time > Clock > Clock Mode

Try Now

Set Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel. To

enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output

and must be receiving digital broadcasts. The accuracy of the time information received may vary

depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using

HDMI or Component connections, you must set the time manually.

If the Clock is Wrong in Auto Mode...

MENU > System > Time > Clock > Time Offset

Try Now

If the time the TV sets automatically is incorrect, you can offset the clock in 1-hour increments by as

much as -/+ 12 hours. Select System > Time > Clock > Time Offset, and then offset the clock to the

correct time.

Time Offset adjusts the time through a network connection and is only available if the Clock Mode is set to

Auto and the TV is connected to the Internet though a local area network.

Time Offset adjusts the time if the TV fails to receive time information through normal digital broadcast

signals.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 145 146

No comments

Samsung UN50H6203AF Specifications Page 100