E-MANUALimagine the possibilitiesThank you for purchasing this Samsung product. To receive more complete service, please register your product atwww.s
◀ ▶ ◀English NIf you want to view the list of favorite channels, press the CH LIST button, and then press the r (CH Mode) button to display Favorites
◀ ▶ ◀English ❑Using the My ContentsEnjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device and/or your PC1. Press the C
▶ ◀ ▶English ❑Connecting a USB Device1. Turn on your TV.2. Connect a USB device containing photo, music and/or movie files to the USB jack on the si
◀ ▶ ◀English NThe USB function might not work properly with unlicensed multimedia files. NRead this information before using My Contents with a USB dev
▶ ◀ ▶English ●Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsib
◀ ▶ ◀English ●If the files are sorted by Folder View, up to 1000 files can be displayed in each folder. ●The TV cannot play MP3 files with DRM that ha
▶ ◀ ▶English ●If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may ma
◀ ▶ ◀English ❑My Contents Selection ScreenTo play a file, move to the file using the l / r / u / d buttons, and then press the ENTERE or ∂ (Play) butt
▶ ◀ ▶English VideosPlaying a Video1. Press the l / r / u / d button to select the desired video in the file list.2. Press the ENTERE button or ∂ (P
◀ ▶ ◀English –During video playback, you can search using the l and r buttons. –You can use the � (REW), µ (FF), Pause, Stop, and Play buttons on the
▶ ◀ ▶English ●Supported Subtitle FormatsFile Extension Container Video Codec ResolutionFrame rate (fps)Bit rate (Mbps)Audio Codec*.avi*.mkvAVI MKVDivx
▶ ◀ ▶EnglishChannel Status Display IconsIcon DescriptionaAn analog channel\A locked channel
◀ ▶ ◀EnglishFile Extension Container Video Codec ResolutionFrame rate (fps)Bit rate (Mbps)Audio Codec*.3gp 3GPPH.264 BP / MP / HP 1920x1080 6 ~ 30 25
▶ ◀ ▶EnglishOther Restrictions NNOTE ●If there are problems with the contents of a codec, the codec will not be supported. ●If the information for a C
◀ ▶ ◀EnglishVideo Decoder Audio Decoder •Supports up to H.264, Level 4.1 •H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. •XVID
▶ ◀ ▶EnglishPlaying movie continuously (Resume Play)If you exit a movie when it is playing, you can play the movie later from the point where you stop
◀ ▶ ◀English MusicPlaying Music1. Press the l / r / u / d button to select the desired Music in the file list.2. Press the ENTERE button or ∂ (Play
▶ ◀ ▶EnglishPlaying selected music1. Press the { (Edit Mode) button. A check box appears on the left side of all the music files.2. Using the arrow
◀ ▶ ◀English PhotosViewing a Photo (or Slide Show)1. Press the l / r / u / d button to select the desired photo in the file list.2. Press the ENTER
▶ ◀ ▶English NWhen you press the ∂ (Play) button in the file list, the slide show will start immediately. NDuring a Slide show, press the TOOLS button
◀ ▶ ◀English ❑My Contents - Additional FunctionsSorting the file listPress the } button in the file list to sort the files.Category Operation Videos M
▶ ◀ ▶EnglishVideos/Music/Photos Play Option menuWhen playing a file, press the TOOLS button. The Option Menu appears. Checks in the table below indica
◀ ▶◀English Channel Manager OCONTENT → Watch TV → Channel Manager → ENTEREUsing Channel Manager, you can add, edit, or delete Added and Favorite chan
◀ ▶ ◀EnglishCategory Operation Videos Music PhotosRepeat ModeYou can play movie and music files repeatedly.c cPicture Size You can adjust the picture s
▶ ◀ ▶EnglishCategory Operation Videos Music PhotosSubtitle SettingYou can play the video with Subtitles. This function only works if the subtitles are
◀ ▶EnglishCategory Operation Videos Music PhotosBackground Music SettingYou can select background music when watching a Slide Show.cZoomYou can zoom i
◀ ▶Other InformationEnglish ❑TroubleShootingIf the TV seems to have a problem, first review this list of problems and solutions. If none of these trou
◀ ▶ ◀EnglishIssues Solutions and ExplanationsThe TV image does not look as good as it did in the store.Store displays are typically tuned to digital,
▶ ◀ ▶EnglishIssues Solutions and ExplanationsColor is wrong or missing. •If you’re using a component connection, make sure the component cables are c
◀ ▶ ◀EnglishIssues Solutions and ExplanationsThere is a dotted line on the edge of the screen. •If the picture size is set to Screen Fit, change it t
▶ ◀ ▶EnglishIssues Solutions and ExplanationsSound Problem First, perform a Sound Test to confirm that your TV audio is properly operating. (go to MEN
◀ ▶ ◀EnglishIssues Solutions and ExplanationsThe speakers are making an inappropriate noise. •Check the cable connections. Make sure a video cable is
▶ ◀ ▶EnglishIssues Solutions and ExplanationsRF(Cable/Antenna) ConnectionThe TV is not receiving all channels. •Make sure the coaxial cable is connec
▶◀ ▶English ●(() Added Ch.: Shows all added channels. ●(() All Channels: Shows all currently available channels. Includes channels that have not been
◀ ▶ ◀EnglishIssues Solutions and ExplanationsPC ConnectionA “Mode not supported' message is shown.” message appears. •Set your PC’s output resol
▶ ◀ ▶EnglishIssues Solutions and ExplanationsOthersPurple/green rolling horizontal bars and buzzing noise from the TV speakers with Component cable c
◀ ▶ ◀EnglishIssues Solutions and ExplanationsA “Mode not supported' message is shown.” message appears. •Check the supported resolution of the T
▶ ◀ ▶EnglishIssues Solutions and ExplanationsThe TV is tilted to the side. •Remove the base stand from the TV and reassemble it.The channel menu is g
◀ ▶ ◀EnglishIssues Solutions and ExplanationsYou have intermittent loss of audio or video. •Check the cable connections and reconnect them. •Loss of
▶ ◀ ▶English ❑Anti-theft Kensington LockA Kenisngton Lock is a device you can use to physically fix your TV in place when using it in a public place.
◀ ▶ ◀EnglishTo lock the product, follow these steps:1. Wrap the Kensington Lock cable around a large, stationary object such as desk or chair.2. Sli
▶ ◀ ▶English ❑LicenseTheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc.TheaterSound technology is incorporated under license from SRS
◀EnglishDivX Certified® to play DivX® video up to HD 1080p, including premium content.DivX®, DivX Certified® and associated logos are trademarks of DivX
◀ ▶ ◀English NUsing the Arrow buttons with Channel Manager1. Highlight a channel in the first column on the left, and then press the l button. The Ch
▶ ◀ ▶EnglishChannel Manager Option Menu tManage channels using the Channel Manager menu options (Watch, Add to Favorites / Edit Favorites, Lock / Unlo
◀ ▶ ◀EnglishOptions ●Watch: Watch the channel you selected. To use, select Watch on the Option menu, and then press ENTERE. ●Add to Favorites / Edit F
▶ ◀ ▶EnglishUsing Edit Favorites to delete a channel from the Favorites List:1. Select Edit Favorites, and then press the ENTERE button. The Edit Fav
◀ ▶ ◀EnglishUsing Edit Favorites to move a channel from one Favorites Group to another:1. Select Edit Favorites, and then press the ENTERE button. Th
▶ ◀ ▶English ●Lock / Unlock : Lock a channel so that the channel cannot be selected and viewed. NThis function is available only when the Child Lock i
ContentsChannel Menu• Using the Channel Menu 1• Memorizing Channels 21• Other Features 25Basic Features• Changing the Preset Picture Modes 27•
◀ ▶ ◀EnglishDeleting a Channel from the Channel Manager:1. Select Delete, and then press the ENTERE button. The Delete pop-up appears.2. Select OK o
▶ ◀ ▶English NNOTE ●Your TV will display all channels, including channels you deleted from the Channel Manager, on the All Channels list. ●A gray-colo
◀ ▶ ◀English ●Deselect All: Deselect all the selected channels. NDeselect All apppears only when you have selected one or more channels. ●Select All:
▶ ◀ ▶English ❑Memorizing Channels OMENUm → Channel → ENTERE Antenna (Air / Cable) tYour TV memorizes channels and adds the memorized channels to the
◀ ▶ ◀EnglishTo select Air or Cable, follow these steps:1. Push MENUm → Channel → ENTERE on your remote.2. Select Antenna, and then press ENTERE.3.
▶ ◀ ▶English Auto ProgramScans for channels automatically and stores them in the TV’s memory.To start Auto Program, follow these steps:1. Push MENUm
◀ ▶ ◀English6. Select STD, HRC, or IRC, and then press ENTERE.7. Select Search or Next, and then press ENTERE. Auto Program starts. NAfter all the a
▶ ◀ ▶English ❑Other Features OMENUm → Channel → ENTERE Fine TuneIf the reception is clear, you do not have to fine tune the channel, as this is done
◀ ▶English Color System (Auto / PAL-N / NTSC)Normally the TV can receive image and sound with good quality when in the mode auto. This mode detects t
◀ ▶Basic FeaturesEnglish ❑Changing the Preset Picture Modes OMENUm → Picture → Picture Mode → ENTERE Picture ModePicture modes apply preset adjustmen
▶Channel MenuEnglish ❑Using the Channel MenuPress the CONTENT button to select Watch TV, and then select the desired menu item. Choose from Schedule M
◀ ▶ ◀English ❑Adjusting Picture Settings OMENUm → Picture → ENTERE Samsung MagicAngleThis feature allows you to see optimal screen quality according
▶ ◀ ▶English Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)Your television has several options for adjusting picture quality. Sel
◀ ▶ ◀English ❑Changing the Picture Size OMENUm → Picture → Screen Adjustment → ENTERE Screen AdjustmentScreen Adjustment provides various picture siz
▶ ◀ ▶EnglishZoom1: Use for moderate magnification. Cuts off the top and sides.Zoom2: Use for a stronger magnification.Wide Fit: Enlarges the aspect ra
◀ ▶ ◀English ●Position: Adjusts the picture position. Position is only available if Picture size is set to Zoom1, Zoom2, Wide Fit, or Screen fit. NTo
▶ ◀ ▶English NTo use the Position function after selecting Screen Fit when connected to an HDMI (1080i/1080p) or Component (1080i/1080p) source, follo
◀ ▶ ◀English ●HD (High Definition): 16:9 - 1080i / 1080p (1920x1080), 720p (1280x720) ●You can adjust and store settings for each external device you
▶ ◀ ▶English ❑Changing the Picture Options Advanced Settings OMENUm → Picture → Advanced Settings → ENTEREAdvance Settings are available in the Stand
◀ ▶ ◀English ●Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ●Dynamic Contrast (Off / Low / Medium / H
▶ ◀ ▶English ●White Balance: Adjusts the red, green, and blue brightness so that the brightest point of a picture becomes white.R-Offset / G-Offset /
◀ ▶ ◀English Schedule Manager OCONTENT → Watch TV → Schedule Manager → ENTERETo cancel or set Timer Viewing. Timer Viewing lets you display the chann
◀ ▶ ◀English Picture Options OMENUm → Picture → Picture Options → ENTERESelect an option using the up and down arrow keys, and then press ENTERE. Use
▶ ◀ ▶English ●Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization / Demo): If the broadcast signal received by your TV is weak
◀ ▶ ◀English ●HDMI Black Level (Normal / Low): Lets you select the black level on the screen to adjust the screen depth. NAvailable only in HDMI mode.
▶ ◀ ▶English Reset Picture (OK / Cancel)Resets your current picture mode to its default settings.
◀ ▶ ◀English ❑Using the TV with Your PCSet the input source to PC. Auto Adjustment t OMENUm → Picture → Auto Adjustment → ENTEREAutomatically adjusts
▶ ◀ ▶English PC Screen Adjustment OMENUm → Picture → Screen Adjustment → PC Screen Adjustment → ENTERE NAvailable in PC mode only. ●Coarse / Fine: Re
◀ ▶ ◀EnglishUsing Your TV as a Computer (PC) DisplayEntering the Video Settings (Based on Windows XP) For your TV to work properly as a computer displ
▶ ◀ ▶English1. On your PC, click “Control Panel” on the Windows start menu.2. Click “Appearance and Themes” in the “Control Panel” window, A display
◀ ▶ ◀English ❑Changing the Preset Sound Modes OMENUm → Sound → Sound Mode → ENTERE Sound Mode tUse the up and down arrow keys to select an option, an
▶ ◀ ▶English ❑Adjusting Sound Settings OMENUm → Sound → ENTERE Sound Effect NIf Speaker Select is set to External Speaker, Sound Effect is disabled.
▶ ◀ ▶EnglishTo use Timer Viewing, follow these steps:1. Press the ENTERE button to select Schedule Manager.2. Press the ENTERE button to add manual
◀ ▶ ◀English ●SRS TruDialog (Off / On)(standard sound mode only)This function allows you to increase the intensity of a voice over background music or
▶ ◀ ▶English Broadcast Audio Options ●Multi-Track Sound (MTS)Select an option using the up and down arrow keys, and the press ENTERE.Mono: Choose for
◀ ▶ ◀English SPDIF OutputThe SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital audio signal when you connect the digital audio j
▶ ◀ ▶English Speaker Settings ●Speaker Select (External Speaker / TV Speaker)If you are listening to the sound track of a broadcast or movie through
◀ ▶ ◀English ●Auto Volume (Off / Normal / Night)Normal equalizes the volume level on each channel, so that when you change channels, the volume level
▶ ◀ ▶English Reset Sound (OK / Cancel)Reset all sound settings to the factory defaults. Select Reset, press ENTERE, select OK on the pop-up, and then
◀ ▶ ◀Preference FeaturesEnglish ❑Setting the Time OMENUm → System →Time → ENTERE Time OThe current time will appear every time you press the INFO but
▶ ◀ ▶EnglishUsing the Sleep Timer OMENUm → System → Time → Sleep Timer → ENTERE ●Sleep Timer t: Automatically shuts off the TV after a preset period o
◀ ▶ ◀EnglishSetting the On / Off Timer OMENUm → System → Time → ENTERE ●Set On Timer so that your TV turns on automatically at a time and on a day of
▶ ◀ ▶EnglishSetup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want On Timer to
◀ ▶ ◀English ●Channel: Select the desired channel. ●Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday. If you select Manual, you can set the d
◀ ▶ ◀EnglishSource: Select TV or USB. Select TV and the TV will display broadcast or cable TV programs when it turns on automatically. Select USB and
▶ ◀ ▶English NNOTE ●If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not oper
◀ ▶ ◀English ●Off Timer: You can set up three separate Off Timer configurations. (Off Timer 1, Off Timer 2, Off Timer 3) NYou must set the clock befor
▶ ◀ ▶English ❑Blocking Programs OMENUm → System → Security → ENTERE SecurityWhen you access the Security functions for the first time, the PIN input
◀ ▶ ◀English ●Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re-enter the same 4 digit
▶ ◀ ▶EnglishHow to watch a restricted program or movieIf the TV is tuned to a restricted program or movie, the Channel Lock will block it. The screen
◀ ▶ ◀English ❑Economical Solutions Eco Solution OMENUm → System → Eco Solution → ENTERE ●Energy Saving (Off / Low / Medium / High / Picture Off): Thi
▶ ◀ ▶English ●No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): To avoid unnecessary energy consumption, you can set how long you want the TV t
◀ ▶ ◀English ❑Picture In Picture (PIP) OMENUm → System → PIP → ENTERE PIP tYou can watch a program whose signal has passed through the TV’s tuner and
▶ ◀ ▶English NNOTE ●For PIP sound, refer to the Sound Select instructions. ●If you turn the TV off while watching in the PIP mode, the PIP function is
▶ ◀ ▶English ●Start Time: You can set the start time you want. NYou can only schedule memorized (added) channels. NOn the Information screen, you can
◀ ▶ ◀English ●PIP SettingsThe picture from the external video source will be in the main screen and the picture from the TV’s tuner will be in the PIP
▶ ◀ ▶English ●PIP (Off / On): Activate or deactivate the PIP function. ●Air/Cable (Air / Cable): Select either Air or Cable as the input source for th
◀ ▶ ◀English ❑Other Features OMENUm → System → ENTERE Menu LanguageSet the menu language.1. Select Menu Language, and then press the ENTERE button.2
▶ ◀ ▶English Caption(On-Screen Text Messages) ●Caption (Off / On): You can switch the caption function on or off. If captions are not available, they
◀ ▶ ◀English Auto Protection Time (Off / 2hours / 4hours / 8hours / 10hours): If the screen displays a still image for a certain period of time you d
▶ ◀ ▶English General ●Max. Power Saving (Off / On): Conserve power by turning the monitor off when the PC is not used for a specified period. ●Game M
◀ ▶ ◀English NIf Game Mode is On: –Picture mode is set to Standard and Sound mode is set to Movie. ●Menu Transparency (Bright / Dark): Set the Transpa
▶ ◀ ▶English Anynet+ (HDMI-CEC)For details on set up options, refer to the “Anynet+ (HDMI-CEC)” instructions.
◀ ▶ ◀English DivX® Video On DemandShows the registration code authorized for the TV. If you connect to the DivX web site and register, you can downlo
▶ ◀ ▶English ❑Support Menu NMENUm → Support → ENTERE e-ManualThe e-Manual is built into your TV. Open the e-Manual to learn how to use your TV’s many
◀ ▶ ◀English Channel ListThe Channel List contains the channels your TV displays (Added Channels) when you press the Channel button on your remote. O
◀ ▶ ◀English Self Diagnosis ●Picture Test: Use to check for picture problems. Picture test displays a high definition picture that you can examine fo
▶ ◀ ▶English ●Sound Test: Use the built-in melody sound to check for sound problems. NIf you hear no sound from the TV’s speakers, before performing t
◀ ▶ ◀English ●Troubleshooting: Displays a troubleshooting guide organized into four symptom categories: Poor or Distorted Picture, Distorted Sound or
▶ ◀ ▶English ● The displayed image may differ depending on the model.Current Version 2011/01/18_000001By USBAlternative Software ----/--/--_-----U Mov
◀ ▶ ◀English ●By USBUpgrading to the Latest VersionTo upgrade By USB, follow these steps:1. Visit www.samsung.com.2. Download the latest USB softwar
▶ ◀ ▶English ●Alternative SoftwareIf there is an issue with the new firmware and it is affecting operation, you can change the software to the previou
◀ ▶English Contact SamsungView this information when your TV does not work properly or when you want to upgrade the software. You can find informatio
◀ ▶Advanced FeaturesEnglishWhat is Anynet+? tAnynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with
◀ ▶ ◀English ●For instructions explaining how to connect Anynet+ external devices, refer to the device’s user manual. ●You must connect an Anynet+ dev
▶ ◀ ▶English ●However, you can connect only one Anynet+ Home Theater. To connect an Anynet+ Home Theate, connect the Home Theater to the TV using an H
▶ ◀ ▶English ●Added Channels: Shows all added (memorized) channels. ●Favorites 1-5: Shows all favorite channels, arranged in up to five groups. Each g
◀ ▶ ◀EnglishAnynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionV
▶ ◀ ▶EnglishAnynet+ Menu Description(device_name) Title Menu Shows the title menu of the connected device. E.g. If a DVD player recorder is connected,
◀ ▶ ◀English ❑Setting Up Anynet+ OMENUm → System → Anynet+ (HDMI-CEC) → ENTERE Anynet+ (HDMI-CEC) (Off / On)To use the Anynet+ Function, you must set
▶ ◀ ▶English Auto Turn Off (No / Yes) Set an Anynet+ Device to turn off automatically when the TV is turned off. NIf Auto Turn Off is set to Yes, run
◀ ▶ ◀English ❑Switching between Anynet+ Devices1. Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press ENTERE.2. Select Device List, an
▶ ◀ ▶English NThe Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu. ●Switching to the selected device may take u
◀ ▶ ◀English ❑Listening through a ReceiverYou can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.1. Select Receiver
▶ ◀ ▶English ❑Troubleshooting for Anynet+Problem Possible SolutionAnynet+ does not work. •Check if the device is an Anynet+ device. The Anynet+ system
◀ ▶ ◀EnglishI want to start Anynet+. •Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in
▶ ◀ ▶EnglishThe connected device is not displayed. •Check whether or not the device supports Anynet+ functions. •Check whether or not the HDMI cable i
Comments to this Manuals