Samsung 400CXN-2 User Manual download pdf (Page 35)

• For an explanation of Component video, consult your DVD or external device's user

manual.

Connecting to a Camcorder

1. Locate the AV output jacks on the camcorder. They are usually found on the side

or back of the camcorder. Connect a set of audio cables between the AUDIO

OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [R-AUDIO-

L] on the LCD Display .

2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the

AV IN [VIDEO] on the LCD Display .

3. Select AV for the Camcorder connection using the SOURCE button on the front of

the LCD Display or on the remote control.

4. Then, start the Camcorder with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not,

check your local electronics store.) If your camcorder is stereo, you need to connect a

set of two cables.

Connecting Using a HDMI Cable

1. Connect input devices such as a Blu-Ray/DVD player to the HDMI IN terminal of

the LCD Display using an HDMI cable.

Note

• In HDMI mode, only PCM format audio is supported.

Connections

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 150 151

No comments

Samsung 400CXN-2 User Manual Page 35