Samsung SSA-S2000W User Manual download pdf (Page 12)

No Command Action/Change setting values No Command Action/Change setting values

1 11 Add User Access Cards (RF CARD ONLY MODE) 31 48 Disable Unlock followed by Door Contact

2 12 Add User Access Cards and PIN (RF CARD + PIN MODE) 32 51

Disable Melody sound (turning off both the melody & key press

audio feedback)

3 13 Add User Access PIN numbers (PIN ONLY MODE) 33 52 Enable Melody sound

4 14 Delete User Access Cards (or PIN) 34 60 Change keypad lock-out time when Try-Out error detected

5 15 Add User Access Card/PIN (RF/PIN Combination Mode) 35 61 Set Aux Input #1 Detection from ‘L’ to ‘H’

6 21

Change Door open time when User Access Card (or PIN) is

granted

36 62 Set Aux Input #1 Detection from ‘H’ to ‘L’

7 22 Change Alarm time when User Access Card (or PIN) is denied 37 63 Set Aux Input #2 Detection from ‘L’ to ‘H’

8 23 Change Alarm time when Try-Out error detected 38 64 Set Aux Input #2 Detection from ‘H’ to ‘L’

9 24 Change Alarm time when Door-Contact error detected 39 65 Set Aux Input #3 Detection from ‘L’ to ‘H’

10 25 Change Alarm time when Aux Input #1 detected 40 66 Set Aux Input #3 Detection from ‘H’ to ‘L’

11 26 Change Alarm time when Aux Input #2 detected 41 67 Set Exit Button Input Detection from ‘L’ to ‘H’

12 27 Change Alarm time when Aux Input #3 detected 42 68 Set Exit Button Input Detection from ‘H’ to ‘L’

13 28 reserved 43 69 Set Door-Contact sensor Input Detection from ‘L’ to ‘H’

14 29 Register 2 digits Duress Alarm password 44 70 Set Door-Contact sensor Input Detection from ‘H’ to ‘L’

15 30 Change Alarm time when Duress Alarm detected 45 71 Activate TTL output to ‘H’

16 31 Test Door open time set by command "21" 46 72 Activate TTL output to ‘L’

17 32 Test Alarm time set by command "22" 47 73 Enable Keypad Input To Enter ID Number

18 33 Test Alarm time set by command "23" 48 74 Disable Keypad Input To Enter ID Number

19 34 Test Alarm time set by command "24" 49 77 Enable Chime Bell Output

20 35 Test Alarm time set by command "25" 50 78 Disable Chime Bell Output

21 36 Test Alarm time set by command "26"

51 80 Set delay time to activate SECURE MODE

22 37 Test Alarm time set by command "27" 52 81 Set Door Open time-out for Door-Contact sensor

23 39 Change Chime Bell activating time 53 82 Set number of times of Try-Out

24 41 Open door unconditionally 54 83 Set input key press time-out time

25 42 Close door unconditionally 55 84 Set Tamper Alarm output port

26 43 Enable QUICK ACCESS MODE 56 88 Enable Tamper Alarm

27 44 Disable QUICK ACCESS MODE 57 89 Disable Tamper Alarm

28 45 Enable Toggle Mode for Lock control 58 99 Re-Initialize and erase all setup data

29 46 Disable Toggle Mode for Lock control

30 47 Enable Unlock followed by Door Contact

10. Summary Table of Commands

1 2 ... 7 8 9 10 11 12 13 14 15

No comments

Samsung SSA-S2000W User Manual Page 12