Samsung OfficeServ 12 Installation Guide download pdf (Page 181)

OfficeServ 12 Programming Guide/Ed.00 CHAPTER 2. MMC Programming

501 System Timers

Allows the technician to adjust individual timers as necessary.

TIMER TABLE

Timer Name Default Range Unit Description

ALARM TIME 100 0-2500 MIN This is the time the system alarm key will start

ringing after the alarm key has been silenced.

ALERT TONE TIME 1000 100-2500

MSEC

This timer sets the duration of the attention

tone preceding a call to a phone in the Voice

Announce or Auto Answer mode. This tone will

also precede a forced Auto Answer call.

ALM REM.INTERVAL 25 1-250 SEC This timer controls the time length between

ring attempts at a station when alarm reminder

is set.

ALM REM RING OFF 10 1-25 SEC This timer controls the length of the ring cycle

duration when alarm reminder is set at a

station.

ATT. RECALL TIME 30 0-250 SEC This is the length of time a transfer recall will

ring at a station before recalling the operator.

AUTO REDIAL INT. 30 1-250 SEC This timer controls the time between attempts

after RETRY dialling is set on a station.

AUTO REDIAL RLS. 45 1-250 SEC This timer controls the duration of a Ring No

Answer condition on a retry number dialled

before the auto redial is automatically

cancelled.

CALLBACK NO ANS 30 1-250 SEC This timer controls the time before the callback

is automatically cancelled when a callback

detects Ring No Answer.

CAMP ON RECALL 30 0-250 SEC This timer controls the duration of time a

camped-on call will stay at a destination before

recalling to the transferring station.

CID MSG RECEIVE 6 1-25 SEC The amount of time that the system will allow a

valid message from the analog CID trunk.

CLI DISPLAY TIME 5 1-25 SEC The amount of time that the Caller ID

information remains on the phone’s display.

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 386 387

No comments

Samsung OfficeServ 12 Installation Guide Page 181